A Polymer Optical Fiber Temperature Sensor Based on Material Features

This paper presents a polymer optical fiber (POF)-based temperature sensor. The operation principle of the sensor is the variation in the POF mechanical properties with the temperature variation. Such mechanical property variation leads to a variation in the POF output power when a constant stress is applied to the fiber due to the stress-optical effect. The fiber mechanical properties are characterized through a dynamic mechanical analysis, and the output power variation with different temperatures is measured. The stress is applied to the fiber by means of a 180° curvature, and supports are positioned on the fiber to inhibit the variation in its curvature with the temperature variation. Results show that the sensor proposed has a sensitivity of 1.04 × 10−3 °C−1, a linearity of 0.994, and a root mean squared error of 1.48 °C, which indicates a relative error of below 2%, which is lower than the ones obtained for intensity-variation-based temperature sensors. Furthermore, the sensor is able to operate at temperatures up to 110 °C, which is higher than the ones obtained for similar POF sensors in the literature.

[1]  A. Badawi Characterization of the optical and mechanical properties of CdSe QDs/PMMA nanocomposite films , 2015, Journal of Materials Science: Materials in Electronics.

[2]  K. Peters Polymer optical fiber sensors—a review , 2010 .

[3]  Kyriacos Kalli,et al.  Carbon Cantilever Beam Health Inspection Using a Polymer Fiber Bragg Grating Array , 2018, Journal of Lightwave Technology.

[4]  Lin Zhang,et al.  In-fiber Bragg-grating temperature sensor system for medical applications , 1997 .

[5]  Nélia Alberto,et al.  Optical Sensors Based on Plastic Fibers , 2012, Sensors.

[6]  David Cebon,et al.  Materials Selection in Mechanical Design , 1992 .

[7]  Yili Fu,et al.  Light intensity modulation fiber-optic sensor for curvature measurement , 2010 .

[8]  J. Zubía,et al.  Theoretical Analysis of the Torsion-Induced Optical Effect in a Plastic Optical Fiber , 1997 .

[9]  Guido Perrone,et al.  Assessment of a Dual-Wavelength Compensation Technique for Displacement Sensors Using Plastic Optical Fibers , 2012, IEEE Transactions on Instrumentation and Measurement.

[10]  Christos Markos,et al.  Single mode step-index polymer optical fiber for humidity insensitive high temperature fiber Bragg grating sensors. , 2016, Optics express.

[11]  Carlos A. F. Marques,et al.  Fast Bragg Grating Inscription in PMMA Polymer Optical Fibres: Impact of Thermal Pre-Treatment of Preforms , 2017, Sensors.

[12]  C. Vazquez,et al.  Polymer Optical Fiber Temperature Sensor With Dual-Wavelength Compensation of Power Fluctuations , 2015, Journal of Lightwave Technology.

[13]  A. Frizera,et al.  Analytical model for a polymer optical fiber under dynamic bending , 2017 .

[14]  João L. Pinto,et al.  A reliable low-cost wireless and wearable gait monitoring system based on a plastic optical fibre sensor , 2011 .

[15]  Romeo Bernini,et al.  Distributed Temperature Sensing in Polymer Optical Fiber by BOFDA , 2014, IEEE Photonics Technology Letters.

[16]  Xinlei Zhou,et al.  Fiber-optic Mach–Zehnder interferometric sensor for high-sensitivity high temperature measurement , 2013 .

[17]  Moisés R. N. Ribeiro,et al.  Corrosion Resistant FBG-Based Quasi-Distributed Sensor for Crude Oil Tank Dynamic Temperature Profile Monitoring , 2015, Sensors.

[18]  Yunjiang Rao,et al.  Fabry–Perot optical fiber tip sensor for high temperature measurement , 2010 .

[19]  Christos Markos,et al.  High-Tg TOPAS microstructured polymer optical fiber for fiber Bragg grating strain sensing at 110 degrees. , 2013, Optics express.

[20]  Elfed Lewis,et al.  Plastic Optical Fibre Sensor for Spine Bending Monitoring with Power Fluctuation Compensation , 2013, Sensors.

[21]  Jing Li,et al.  Liquid level measurement based on a no-core fiber with temperature compensation using a fiber Bragg grating , 2016 .

[22]  Carmen Vázquez García,et al.  A Temperature Sensor Based on a Polymer Optical Fiber Macro-Bend , 2013, Sensors.