A Model Reference Adaptive Control System using a Cost Function Criterion for Driers and other Dead-time Processes

ABSTRACT The possibility of using a model reference adaptive control scheme to improve the control of a rotary solids drier is examined; in this process time delay makes efficient and accurate control difficult when conventional feed back control is used. The choice of realistic performance criterion is discussed which is suitable for computation by a digital computer. It is shown that effective control can be achieved by optimizing the performance of a model representing the part of the process without the time delay, and storing the optimum control signal for the duration of the time delay before applying it to the process. Various optimizing procedures are presented and it is shown that a particular iterative procedure gives the best results.The problem of the drift which will occur if the model does not accurately match the process is discussed and it is suggested that this may be overcome by using a direct feedback loop to trim the process output. This is part of an integrated research programme in t...

[1]  M. E. Findley,et al.  Dynamics of a Radiant Dryer with Countercurrent Air Flow , 1964 .

[2]  Donald P. Eckman.  Automatic Process Control , 1963 .

[3]  Leonard A. Gould,et al.  Analytical design of linear feedback controls , 1957 .

[4]  Ill C. W. Merriam.  Use of a mathematical error criterion in the design of adaptive control systems , 1960 .

[5]  Simon Ramo,et al.  Handbook of automation, computation, and control , 1958 .

[6]  Daniel D. McCracken,et al.  Numerical methods and FORTRAN programming , 1964 .

[7]  Richard Bellman,et al.  Adaptive Control Processes: A Guided Tour , 1961, The Mathematical Gazette.

[8]  D. Graham,et al.  The synthesis of "optimum" transient response: Criteria and standard forms , 1953, Transactions of the American Institute of Electrical Engineers, Part II: Applications and Industry.

[9]  R. E. Kalman,et al.  Optimum Seeking Methods. , 1964 .

[10]  R. N. Clark.  Integral of the error squared as a performance index for automatic control systems , 1961, Transactions of the American Institute of Electrical Engineers, Part II: Applications and Industry.

[11]  W. C. Schultz,et al.  The selection and use of servo performance criteria , 1958, Transactions of the American Institute of Electrical Engineers, Part II: Applications and Industry.

[12]  P. S. Buckley.  Automatic control of processes with dead time , 1960 .

[13]  T. M. Stout.  Mathematical models for computer control systems , 1959 .