Low-drift flow sensor with zero-offset thermopile-based power feedback

A thermal flow sensor has been realised consisting of freely-suspended silicon-rich silicon-nitride microchannels with an integrated Al/poly-Si++ thermopile in combination with up- and downstream Al heater resistors. The inherently zero offset of the thermopile is exploited in a feedback loop controlling the dissipated power in the heater resistors, eliminating inevitable influences of resistance drift and mismatch of the thin-film metal resistors. The control system cancels the flow-induced temperature difference across the thermopile by controlling a power difference between both heater resistors, thereby giving a measure for the flow rate. The flow sensor was characterised for power difference versus water flow rates up to 1.5 mul-min-1, being in good agreement with a thermal model of the sensor, and the correct low-drift operation of the temperature-balancing control system has been verified.

[1]  Yu-Chong Tai,et al.  Nanofluidic flowmeter using carbon sensing element , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[2]  M. Dijkstra,et al.  Miniaturized flow sensor with planar integrated sensor structures on semicircular surface channels , 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).

[3]  Massimo Piotto,et al.  A double heater integrated gas flow sensor with thermal feedback , 2005 .

[4]  M. Elwenspoek,et al.  A new class of thermal flow sensors using /spl Delta/T=0 as a control signal , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[5]  Remco J. Wiegerink,et al.  A versatile surface channel concept for microfluidic applications , 2007 .