Design and test of a 5kWe high-temperature polymer electrolyte fuel cell system operated with diesel and kerosene

[1]  Christiane Wiethege.  Mobile Brenngaserzeugungssysteme mit Mitteldestillaten für Hochtemperatur-PEFC , 2013 .

[2]  Søren Knudsen Kær,et al.  Directly connected series coupled HTPEM fuel cell stacks to a Li-ion battery DC bus for a fuel cell electrical vehicle , 2008 .

[3]  Waldemar Bujalski,et al.  High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) – A review , 2013 .

[4]  E. U. Ubong,et al.  Three-Dimensional Modeling and Experimental Study of a High Temperature PBI-Based PEM Fuel Cell , 2009 .

[5]  Joel Berry,et al.  Diesel reformer — a key component for a truck fuel cell APU , 2010 .

[6]  S. Pischinger,et al.  Range-Extender eines Plug-in Hybrids mit einer Hochtemperatur-PEM-Brennstoffzelle , 2008 .

[7]  M. Nilsson,et al.  Characterization and optimization of an autothermal diesel and jet fuel reformer for 5 kWe mobile fuel cell applications , 2010 .

[8]  Thomas Aicher,et al.  Fuel processors for fuel cell APU applications , 2006 .

[9]  Sangho Yoon,et al.  Self-sustained operation of a kWe-class kerosene-reforming processor for solid oxide fuel cells , 2009 .

[10]  Stefan Pischinger,et al.  Development and design of experiments optimization of a high temperature proton exchange membrane fuel cell auxiliary power unit with onboard fuel processor , 2011 .

[11]  Detlef Stolten,et al.  Optimised Mixture Formation for Diesel Fuel Processing , 2008 .

[12]  S. Kær,et al.  Electrochemical characterization of a polybenzimidazole-based high temperature proton exchange membrane unit cell , 2009 .

[13]  Joachim Scholta,et al.  Externally cooled high temperature polymer electrolyte membrane fuel cell stack , 2009 .

[14]  Roland Peters,et al.  Analysis and optimization of solid oxide fuel cell-based auxiliary power units using a generic zero-dimensional fuel cell model , 2011 .

[15]  R. C. Samsun,et al.  Autothermal reforming of commercial Jet A-1 on a 5kWe scale , 2007 .

[16]  Jürgen Mergel,et al.  Durability of ABPBI‐based MEAs for High Temperature PEMFCs at Different Operating Conditions , 2008 .

[17]  Søren Knudsen Kær,et al.  Part two: Control of a novel HTPEM-based micro combined heat and power fuel cell system , 2008 .

[18]  Peiwen Li,et al.  Small-scale reforming of diesel and jet fuels to make hydrogen and syngas for fuel cells: A review , 2013 .

[19]  Søren Knudsen Kær,et al.  Part one: A novel model of HTPEM-based micro-combined heat and power fuel cell system , 2008 .

[20]  Volker Hessel,et al.  An Investigation into the Transient Behavior of a Microreactor System for Reforming of Diesel Fuel in the kW Range , 2009 .

[21]  R. C. Samsun,et al.  Fuel Processing of Diesel and Kerosene for Auxiliary Power Unit Applications , 2013 .

[22]  Thomas J. Schmidt,et al.  Properties of high-temperature PEFC Celtec®-P 1000 MEAs in start/stop operation mode , 2008 .

[23]  Søren Knudsen Kær,et al.  Modelling and evaluation of heating strategies for high temperature polymer electrolyte membrane fuel cell stacks , 2008 .

[24]  Robert F. Savinell,et al.  High temperature proton exchange membranes based on polybenzimidazoles for fuel cells , 2009 .

[25]  Klaus Lucka,et al.  Diesel Steam Reforming for PEM Fuel Cells , 2008 .

[26]  P. Pfeifer,et al.  Reforming of Diesel Fuel in a Micro Reactor , 2008 .

[27]  Qing Du,et al.  Numerical simulations of carbon monoxide poisoning in high temperature proton exchange membrane fuel cells with various flow channel designs , 2013 .

[28]  David P. Wilkinson,et al.  High temperature PEM fuel cells , 2006 .

[29]  Dr‐Ing. G. Kolb,et al.  Entwicklung eines mikrostrukturierten Methanolreformers gekoppelt mit einer Hochtemperatur-PEM Brennstoffzelle , 2009 .

[30]  Thomas Aicher,et al.  Catalytic autothermal reforming of Jet fuel , 2005 .

[31]  P. Ekdunge,et al.  Diesel fuel reformer for automotive fuel cell applications , 2009 .

[32]  D. Stolten,et al.  Development of HT-PEFC stacks in the kW range , 2013 .

[33]  Philip Engelhardt,et al.  Integrated fuel cell APU based on a compact steam reformer for diesel and a PEMFC , 2012 .

[34]  Leah Shelton.  Quality control in fuel cell manufacturing , 1998 .

[35]  T. Schmidt.  High-Temperature Polymer Electrolyte Fuel Cells: Durability Insights , 2009 .

[36]  Brian C. Benicewicz,et al.  Durability Studies of PBI‐based High Temperature PEMFCs , 2008 .

[37]  H. Vesala,et al.  Experimental Study of an SOFC Stack Operated With Autothermally Reformed Diesel Fuel , 2013 .

[38]  Lukas Lüke.  Analyse des Betriebsverhaltens von Hochtemperatur-Polymerelektrolyt-Brennstoffzellen , 2013 .

[39]  Werner Lehnert,et al.  HT-PEFC Systems Operating with Diesel and Kerosene for APU Application , 2012 .

[40]  Peter Pfeifer,et al.  Reforming of diesel fuel in a micro reactor for APU systems , 2008 .

[41]  Ronghuan He,et al.  Integration of high temperature PEM fuel cells with a methanol reformer , 2005 .

[42]  Suk Woo Nam,et al.  Demonstration of a 20 W class high-temperature polymer electrolyte fuel cell stack with novel fabrication of a membrane electrode assembly , 2011 .