Self-Heating During submicrosecond Current Transients in Pr0.7Ca0.3MnO3-Based RRAM

In filamentary RRAM, the role of self-heating in set/reset (by ion transport) is well established. However, in nonfilamentary Pr0.7Ca0.3MnO3 (PCMO) RRAM, self-heating during set/reset has not been explored. Recently, we have shown self-heating to explain nonlinearity in dc IV characteristics. In this paper, we present the observation of self-heating using transient current during pulses. We show that the cooling timescale is limited by measurement system timescale (~30 ns). The self-heating-based experimental current transient timescale is longer (50-100 ns) and is not described by simple exponential decay. To explain this behavior, self-heating in PCMO RRAM (where Joule heating and current increase create a positive feedback) is implemented into technology computer aided design simulations. Simulations produce excellent agreement with experiments. Eventually, simulations deviate from experiments when thermally assisted ionic transport during set/reset is not included in the model. To interrupt the continuous self-heating, an n-pulse-train with cooling time between pulses versus single pulse-based set/reset experiment was designed with the same peak bias time. Set/reset effectiveness degrades as n increases while effect of increasing cooling time confirmed a cooling timescale of ~30 ns. Overall, self-heating provides a consistent explanation of the transient currents. Thus, this paper establishes that self-heating considerations must be included for PCMO-based RRAM modeling and design.

[1]  M. Rozenberg,et al.  A new route to the Mott-Hubbard metal-insulator transition: Strong correlations effects in Pr0.7Ca0.3MnO3 , 2013, Scientific Reports.

[2]  H-S Philip Wong,et al.  Multi-level control of conductive nano-filament evolution in HfO2 ReRAM by pulse-train operations. , 2014, Nanoscale.

[3]  Udayan Ganguly,et al.  Variability assessment and mitigation by predictive programming in Pr0.7Ca0.3MnO3 based RRAM , 2015, 2015 73rd Annual Device Research Conference (DRC).

[4]  H. Koinuma,et al.  Trap-controlled space-charge-limited current mechanism in resistance switching at Al∕Pr0.7Ca0.3MnO3 interface , 2008 .

[5]  H. Hwang,et al.  Low programming voltage resistive switching in reactive metal/polycrystalline Pr0.7Ca0.3MnO3 devices , 2010 .

[6]  S. Balatti,et al.  Resistive Switching by Voltage-Driven Ion Migration in Bipolar RRAM—Part II: Modeling , 2012, IEEE Transactions on Electron Devices.

[7]  A. Sawa,et al.  Relationship between resistive switching characteristics and band diagrams of Ti / Pr 1 − x Ca x MnO 3 junctions , 2009 .

[8]  Shimeng Yu,et al.  On the Switching Parameter Variation of Metal-Oxide RRAM—Part I: Physical Modeling and Simulation Methodology , 2012, IEEE Transactions on Electron Devices.

[9]  Paul Bã ¼ rger.  Silicon Vlsi Technology Fundamentals Practice And Modeling , 2016 .

[10]  Hiroshi Koyama,et al.  Resistive switching properties of high crystallinity and low-resistance Pr0.7Ca0.3MnO3 thin film with point-contacted Ag electrodes , 2007 .

[11]  Shimeng Yu,et al.  A Phenomenological Model for the Reset Mechanism of Metal Oxide RRAM , 2010, IEEE Electron Device Letters.

[12]  D. Ielmini,et al.  Self-Accelerated Thermal Dissolution Model for Reset Programming in Unipolar Resistive-Switching Memory (RRAM) Devices , 2009, IEEE Transactions on Electron Devices.

[13]  Wenqing Zhang,et al.  Effect of carrier trapping on the hysteretic current-voltage characteristics in Ag/La 0.7 Ca 0.3 MnO 3 /Pt heterostructures , 2006 .

[14]  Shimeng Yu,et al.  Investigating the switching dynamics and multilevel capability of bipolar metal oxide resistive switching memory , 2011 .

[15]  Chang Jung Kim,et al.  Physical electro-thermal model of resistive switching in bi-layered resistance-change memory , 2013, Scientific Reports.

[16]  H. Hwang,et al.  Memristive switching behavior in Pr0.7Ca0.3MnO3 by incorporating an oxygen‐deficient layer , 2011 .

[17]  D. Ielmini,et al.  Modeling the Universal Set/Reset Characteristics of Bipolar RRAM by Field- and Temperature-Driven Filament Growth , 2011, IEEE Transactions on Electron Devices.

[18]  R. Williams,et al.  Exponential ionic drift: fast switching and low volatility of thin-film memristors , 2009 .

[19]  Malgorzata Jurczak,et al.  Complementary Role of Field and Temperature in Triggering ON/OFF Switching Mechanisms in ${\rm Hf}/{\rm HfO}_{2}$ Resistive RAM Cells , 2013, IEEE Transactions on Electron Devices.

[20]  Wen-Yuan Chang,et al.  Resistive switching characteristics in Pr0.7Ca0.3MnO3 thin films on LaNiO3-electrodized Si substrate , 2009 .

[21]  H. Hwang,et al.  Effect of oxygen migration and interface engineering on resistance switching behavior of reactive metal/polycrystalline Pr0.7Ca0.3MnO3 device for nonvolatile memory applications , 2009, 2009 IEEE International Electron Devices Meeting (IEDM).

[22]  A. K. Singh,et al.  A selectorless RRAM with record memory window and nonlinearity based on trap filled limit mechanism , 2015, 2015 15th Non-Volatile Memory Technology Symposium (NVMTS).

[23]  N. Panwar,et al.  Materials parameter extraction using analytical models in PCMO based RRAM , 2015, 2015 73rd Annual Device Research Conference (DRC).

[24]  Hyunsang Hwang,et al.  Thermally-assisted Ti/Pr0.7Ca0.3MnO3 ReRAM with excellent switching speed and retention characteristics , 2011, 2011 International Electron Devices Meeting.

[25]  Hyunsang Hwang,et al.  Resistive-Switching Characteristics of $\hbox{Al}/ \hbox{Pr}_{0.7}\hbox{Ca}_{0.3}\hbox{MnO}_{3}$ for Nonvolatile Memory Applications , 2009, IEEE Electron Device Letters.

[26]  M. Lees,et al.  Specific heat ofPr0.6(Ca1−xSrx)0.4MnO3(0<~x<~1) , 1999 .

[27]  Insung Kim,et al.  Thermally assisted resistive switching in Pr0.7Ca0.3MnO3/Ti/Ge2Sb2Te5 stack for nonvolatile memory applications , 2011 .

[28]  N. Panwar,et al.  Effect of Morphological Change on Unipolar and Bipolar Switching Characteristics in Pr 0.7 Ca 0.3 MnO 3 Based RRAM , 2015 .

[29]  M. Lampert.  Volume-controlled current injection in insulators , 1964 .

[30]  R. Dittmann,et al.  Origin of the Ultra‐nonlinear Switching Kinetics in Oxide‐Based Resistive Switches , 2011 .

[31]  S. Menzel,et al.  Analysis of Transient Currents During Ultrafast Switching of $\hbox{TiO}_{2}$ Nanocrossbar Devices , 2011, IEEE Electron Device Letters.