Processing of transient signals from damage in CFRP composite materials monitored with embedded intensity-modulated fiber optic sensors

Abstract In this research study, intensity-modulated fiber optic sensors, whose working principle is based on the microbending concept, are used to monitor the damage in C/epoxy laminates during tensile loading. The use of advanced signal processing techniques based on time–frequency analysis is explained in order to get information on the damage developing in the composite. The signal Short Time Fourier Transform (STFT) has been computed and several robust noise reduction algorithms have been applied. Principally, Wiener adaptive filtering, improved spectral subtraction filtering, minimum-phase FIR (Finite Impulse Response) filtering and Singular Value Decomposition (SVD)-based filtering have been used. An energy and frequency-based detection criterion is introduced to detect transient signals that can be correlated with the Modal Acoustic Emission (MAE) results and thus damage in the composite material. Hints are that time–frequency analysis and Hankel Total Least Square (HTLS) method can also be used for damage characterisation (delamination, matrix cracking and fiber breaking).

[1]  Kent A. Murphy,et al.  Stabilized extrinsic fiber optic Fabry-Perot sensor for surface acoustic wave detection , 1991 .

[2]  Gene H. Golub,et al.  Matrix computations , 1983 .

[3]  Raymond M. Measures,et al.  Advances toward fiber optic based smart structures [also Erratum 31(4) 861-862 (Apr1992)] , 1992 .

[4]  Kent A. Murphy,et al.  Optical fiber sensing technique for edge-induced and internal delamination detection in composites , 1995 .

[5]  J. W. Berthold,et al.  Historical review of microbend fiber-optic sensors , 1995 .

[6]  G. N. Sage,et al.  The failure of optical fibres embedded in composite materials , 1988 .

[7]  C. K. Asawa,et al.  Microbending Fiber Optic Sensing , 1983, Other Conferences.

[8]  Sabine Van Huffel,et al.  Enhanced resolution based on minimum variance estimation and exponential data modeling , 1993, Signal Process..

[9]  Martine Wevers,et al.  Optical and acoustic damage detection in laminated CFRP composite materials , 2000 .

[10]  S. Vanhuffel,et al.  Algorithm for time-domain NMR data fitting based on total least squares , 1994 .

[11]  Raymond M. Measures,et al.  Optical fibre damage detection for an aircraft composite leading edge , 1990 .

[12]  Hiroshi Tsuda,et al.  Damage monitoring of carbon-fibre-reinforced plastics using Michelson interferometric fibre-optic sensors , 1998 .

[13]  Kent A. Murphy,et al.  Extrinsic Fabry-Perot sensor for strain and crack opening displacement measurements from -200 to 900 degrees C , 1992 .

[14]  D. Jensen,et al.  Performance of graphite/bismaleimide laminates with embedded optical fibers. I. Uniaxial tension , 1992 .

[15]  Vincent J. Tekippe,et al.  Environmentally Insensitive Diaphragm Reflectance Pressure Transducer , 1983, Other Conferences.

[16]  Martine Wevers,et al.  Static and dynamic testing of a quasi-isotropic composite with embedded optical fibres , 1999 .

[17]  Sabine Van Huffel,et al.  Spectral subtraction method applied to damage detection in composite materials with embedded optical fibers , 2001 .

[18]  Jan Kybic,et al.  Extended spectral subtraction , 1996, 1996 8th European Signal Processing Conference (EUSIPCO 1996).

[19]  S. Boll,et al.  Suppression of acoustic noise in speech using spectral subtraction , 1979 .

[20]  John G. Proakis,et al.  Digital Signal Processing: Principles, Algorithms, and Applications , 1992 .