Self-buckling of micromachined beams under resistive heating

Self-buckling behavior of micromachined beams under resistive heating is described by an electromechanical model with experimental verifications. This model consists of both electrothermal and thermoelastic analyses for beam-shape polysilicon microstructures that are fabricated by a standard surface micromachining process. When an input electrical current is applied, Joule-heating effects trigger the thermal expansion of beam structures and cause mechanical buckling. The standard testing devices are clamped-clamped bridges, 2-/spl mu/m wide, 2-/spl mu/m thick, and 100-/spl mu/m long. It is found that a minimum current of 3.5 mA is required to cause beam buckling. Under an input current of 4.8 mA, a lateral deflection of 2.9/spl plusmn/0.2 /spl mu/m at the center of the bridge is measured with a computer image processing scheme. The experimental measurements are found to be consistent with analytical predictions. A discussion of modeling considerations and process variations is presented.

[1]  C. W. Bert,et al.  Implications of stress dependency of the thermal expansion coefficient on thermal buckling , 1992 .

[2]  Electro, thermal and elastic characterizations of suspended micro beams , 1998 .

[3]  H. Fujita,et al.  A Reshaping Technology With Joule Heat For Three Dimensional Silicon Structures , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[4]  Victor M. Bright,et al.  Force measurements of polysilicon thermal microactuators , 1996, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[5]  A. N. Kounadis,et al.  Lateral post-buckling analysis of beams , 1993 .

[6]  Chang-Jin Kim,et al.  A bistable snapping microactuator , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[7]  R. Howe,et al.  Hexsil tweezers for teleoperated micro-assembly , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[8]  W. Benecke,et al.  Thermally driven microvalve with buckling behaviour for pneumatic applications , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[9]  S. Timoshenko,et al.  Analysis of Bi-Metal Thermostats , 1925 .

[10]  T. Christenson,et al.  Thermo-magnetic metal flexure actuators , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[11]  Weileun Fang,et al.  Post buckling of micromachined beams , 1994 .

[12]  Michael R. Horne,et al.  The stability of frames , 1965 .

[13]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[14]  Liwei Lin,et al.  Vertically driven microactuators by electrothermal buckling effects , 1998 .

[16]  D. W. Burns,et al.  A simple technique for the determination of mechanical strain in thin films with applications to polysilicon , 1985 .

[17]  R. Howe,et al.  A micro strain gauge with mechanical amplifier , 1997 .

[18]  S. Timoshenko,et al.  Theory of Elasticity (3rd ed.) , 1970 .

[19]  Y. Fung.  Foundations of solid mechanics , 1965 .

[20]  B. Halg,et al.  On a nonvolatile memory cell based on micro-electro-mechanics , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[21]  Mu Chiao,et al.  Electrothermal responses of lineshape microstructures , 1996 .

[22]  William C. Tang,et al.  Electrostatic Comb Drive Levitation And Control Method , 1992 .

[23]  W. Riethmuller,et al.  Thermally excited silicon microactuators , 1988 .