Improvement of Transformerless 200W SMPS Using CUK DC-DC Converter

This paper presents the design of transformer less DC-DC converter for 200 W SMPS application. The converter circuit based on CUK topology which is basically combination of buck and boost converter topologies. The proposed converter converts input DC voltage of 50 V or less to a 5 V stable and ripple free load current. The output also is a load independent. A fast switching and low ON-resistance power MOSFETs was used to step down voltage. The power switches operated at high frequency, and the PWM control IC was used to provide the operating signal for the switch. In this paper the concept of basic Cuk converter is reviewed, subsequently the derivation of the proposed converter is presented. And the simulation results of the power circuit are analyzed and discussed.

[1]  Zhong Du,et al.  Switched capacitor DC-DC converters enable electronic products to become more compact , 1996, ICSE '96. 1996 IEEE International Conference on Semiconductor Electronics. Proceedings.

[2]  Marian K. Kazimierczuk,et al.  Derivation of the Cuk PWM DC-DC converter circuit topology , 2003, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03..

[3]  G. Roig,et al.  Voltage divided noninverting Cuk converter with large conversion ratios , 1991, IEEE Proceedings of the SOUTHEASTCON '91.

[4]  K. Kuwabara,et al.  Switched-capacitor DC-DC converters , 1988, 10th International Telecommunications Energy Conference.

[5]  R. Middlebrook.  Transformerless DC-to-DC converters with large conversion ratios , 1988 .

[6]  A. Ioinovici,et al.  Development of power electronics converters based on switched-capacitor circuits , 1992, [Proceedings] 1992 IEEE International Symposium on Circuits and Systems.