Discrete entropy-based health indicator and LSTM for the forecasting of bearing health

[1]  M. Orchard,et al.  A Bayesian approach for fatigue damage diagnosis and prognosis of wind turbine blades , 2022, Mechanical Systems and Signal Processing.

[2]  C. Delpha,et al.  An incipient fault diagnosis methodology using local Mahalanobis distance: Fault isolation and fault severity estimation , 2022, Signal Process..

[3]  Hao Liu,et al.  A predictive sliding local outlier correction method with adaptive state change rate determining for bearing remaining useful life estimation , 2022, Reliab. Eng. Syst. Saf..

[4]  Wilson Wang,et al.  An enhanced particle filter technology for battery system state estimation and RUL prediction , 2022, Measurement.

[5]  F. Naderkhani,et al.  Semi-supervised clustering-based method for fault diagnosis and prognosis: A case study , 2022, Reliab. Eng. Syst. Saf..

[6]  Pradeep Kundu,et al.  State-space modeling and novel entropy-based health indicator for dynamic degradation monitoring of rolling element bearing , 2022, Reliab. Eng. Syst. Saf..

[7]  He-sheng Tang,et al.  Noise subtraction and marginal enhanced square envelope spectrum (MESES) for the identification of bearing defects in centrifugal and axial pump , 2022 .

[8]  P. Shakya,et al.  Bearing fault diagnosis and prognosis using data fusion based feature extraction and feature selection , 2021, Measurement.

[9]  W. He,et al.  Fault feature extraction of rolling element bearing based on EVMD , 2021, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[10]  Ping Wu,et al.  Bearing fault diagnosis by combining a deep residual shrinkage network and bidirectional LSTM , 2021, Measurement Science and Technology.

[11]  C. P. Gandhi,et al.  VMD based trigonometric entropy measure: a simple and effective tool for dynamic degradation monitoring of rolling element bearing , 2021, Measurement Science and Technology.

[12]  Ilyas Ozer,et al.  A combined deep learning application for short term load forecasting , 2021 .

[13]  Songhua Li,et al.  Predicting residual life of rolling bearing using IMMFE and BiLSTM-GRU-LR , 2021, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[14]  Peng Ding,et al.  Meta deep learning based rotating machinery health prognostics toward few-shot prognostics , 2021, Appl. Soft Comput..

[15]  Haizhou Huang,et al.  A hybrid model of LSTM neural networks with a thermodynamic model for condition-based maintenance of compressor fouling , 2021, Measurement Science and Technology.

[16]  B. Jiang,et al.  A data-driven prognostics method for explicit health index assessment and improved remaining useful life prediction of bearings. , 2021, ISA transactions.

[17]  Weihua Zhang,et al.  Application of the refined multiscale permutation entropy method to fault detection of rolling bearing , 2021, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[18]  Jiawei Xiang,et al.  Sparse transfer learning for identifying rotor and gear defects in the mechanical machinery , 2021, Measurement.

[19]  Kuanfang He,et al.  Performance Degradation Assessment of Rotary Machinery Based on a Multiscale Tsallis Permutation Entropy Method , 2021 .

[20]  Uday Kumar,et al.  A novel approach of multisensory fusion to collaborative fault diagnosis in maintenance , 2021, Inf. Fusion.

[21]  Il Yong Kim,et al.  A nonlinear-drift-driven Wiener process model for remaining useful life estimation considering three sources of variability , 2021, Reliab. Eng. Syst. Saf..

[22]  Qingbo He,et al.  Oscillation based permutation entropy calculation as a dynamic nonlinear feature for health monitoring of rolling element bearing , 2021 .

[23]  Jun Yu,et al.  Remaining useful life prediction of planet bearings based on conditional deep recurrent generative adversarial network and action discovery , 2021, Journal of Mechanical Science and Technology.

[24]  Hesheng Tang,et al.  Tacho-less sparse CNN to detect defects in rotor-bearing systems at varying speed , 2021, Eng. Appl. Artif. Intell..

[25]  Ahmed Abbou,et al.  Short-term self consumption PV plant power production forecasts based on hybrid CNN-LSTM, ConvLSTM models , 2021 .

[26]  Hongfu Zuo,et al.  Prediction of remaining useful life of multi-stage aero-engine based on clustering and LSTM fusion , 2021, Reliab. Eng. Syst. Saf..

[27]  E. Dandıl,et al.  Detection of pseudo brain tumors via stacked LSTM neural networks using MR spectroscopy signals , 2021 .

[28]  Haizhou Chen,et al.  Long-term gear life prediction based on ordered neurons LSTM neural networks , 2020 .

[29]  Zhaoxiang Chen,et al.  Mission Reliability Evaluation for Fuzzy Multistate Manufacturing System Based on an Extended Stochastic Flow Network , 2020, IEEE Transactions on Reliability.

[30]  Gurpreet Singh,et al.  Improvement in classification accuracy and computational speed in bearing fault diagnosis using multiscale fuzzy entropy , 2020, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[31]  Minqiang Xu,et al.  A new Wasserstein distance- and cumulative sum-dependent health indicator and its application in prediction of remaining useful life of bearing , 2020, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[32]  Dewen Seng,et al.  A combined method for short-term traffic flow prediction based on recurrent neural network , 2020 .

[33]  Yangyang Wang,et al.  Long short-term memory neural network with weight amplification and its application into gear remaining useful life prediction , 2020, Eng. Appl. Artif. Intell..

[34]  Jiawei Xiang,et al.  Bearing defect size assessment using wavelet transform based Deep Convolutional Neural Network (DCNN) , 2020 .

[35]  Jong-Myon Kim,et al.  A Novel Health Indicator Based on Information Theory Features for Assessing Rotating Machinery Performance Degradation , 2020, IEEE Transactions on Instrumentation and Measurement.

[36]  Yaguo Lei,et al.  A Hybrid Prognostics Approach for Estimating Remaining Useful Life of Rolling Element Bearings , 2020, IEEE Transactions on Reliability.

[37]  Jun Zhu,et al.  A new data-driven transferable remaining useful life prediction approach for bearing under different working conditions , 2020 .

[38]  Jing Lin,et al.  Transfer fault diagnosis of bearing installed in different machines using enhanced deep auto-encoder , 2020 .

[39]  Yu Yang,et al.  Enhanced deep gated recurrent unit and complex wavelet packet energy moment entropy for early fault prognosis of bearing , 2020, Knowl. Based Syst..

[40]  Weihua Gui,et al.  Non-ferrous metals price forecasting based on variational mode decomposition and LSTM network , 2020, Knowl. Based Syst..

[41]  A. Kumar,et al.  Development of LDA Based Indicator for the Detection of Unbalance and Misalignment at Different Shaft Speeds , 2019, Experimental Techniques.

[42]  R. S. Gunerkar,et al.  Classification of Ball Bearing Faults Using Vibro-Acoustic Sensor Data Fusion , 2019, Experimental Techniques.

[43]  Cody Walker,et al.  Adapting Approximate Entropy as a Health Indicator of Rotating Machinery for Estimation of Remaining Useful Life , 2019, Annual Conference of the PHM Society.

[44]  Oluseun Omotola Aremu,et al.  A Relative Entropy Weibull-SAX framework for health indices construction and health stage division in degradation modeling of multivariate time series asset data , 2019, Adv. Eng. Informatics.

[45]  Yuhuang Zheng,et al.  Predicting Remaining Useful Life Based on Hilbert-Huang Entropy with Degradation Model , 2019, J. Electr. Comput. Eng..

[46]  Minping Jia,et al.  Intelligent fault diagnosis of rotating machinery using improved multiscale dispersion entropy and mRMR feature selection , 2019, Knowl. Based Syst..

[47]  Xiao Chen,et al.  Pulsar candidate recognition with deep learning , 2019, Comput. Electr. Eng..

[48]  Anil Kumar,et al.  Role of Signal Processing, Modeling and Decision Making in the Diagnosis of Rolling Element Bearing Defect: A Review , 2018, Journal of Nondestructive Evaluation.

[49]  Xianzhi Wang,et al.  Early fault diagnosis of rolling bearings based on hierarchical symbol dynamic entropy and binary tree support vector machine , 2018, Journal of Sound and Vibration.

[50]  Rajesh Kumar,et al.  Oscillatory behavior-based wavelet decomposition for the monitoring of bearing condition in centrifugal pumps , 2018 .

[51]  Wei Jie Wang,et al.  Feature Extraction for Rolling Element Bearing Faults Using Resonance Sparse Signal Decomposition , 2017, Experimental Techniques.

[52]  R. Kumar,et al.  Manifold Learning Using Linear Local Tangent Space Alignment (LLTSA) Algorithm for Noise Removal in Wavelet Filtered Vibration Signal , 2016 .

[53]  Brigitte Chebel-Morello,et al.  PRONOSTIA : An experimental platform for bearings accelerated degradation tests. , 2012 .

[54]  Balbir S. Dhillon,et al.  Early fault diagnosis of rotating machinery based on wavelet packets—Empirical mode decomposition feature extraction and neural network , 2012 .

[55]  Antolino Gallego,et al.  Wavelet power, entropy and bispectrum applied to AE signals for damage identification and evaluation of corroded galvanized steel , 2009 .

[56]  Jürgen Schmidhuber,et al.  Long Short-Term Memory , 1997, Neural Computation.