Interconnects for Solid Oxide Fuel Cells

[1]  Jeffrey W. Fergus,et al.  Solid Oxide Fuel Cells : Materials Properties and Performance , 2016 .

[2]  Jong-hee Kim,et al.  Development of a new cost effective Fe–Cr ferritic stainless steel for SOFC interconnect , 2015 .

[3]  Yen‐Pei Fu,et al.  Characterizations of Fe Doping on B‐Site of (La0.8Ca0.2)(Cr0.9Co0.1)O3−δ Interconnect Materials for SOFCs , 2015 .

[4]  W. Quadakkers,et al.  Sigma-Phase Formation in High Chromium Ferritic Steels at 650°C , 2015 .

[5]  Shilei Li,et al.  Effects of Ni content on the microstructures, mechanical properties and thermal aging embrittlement behaviors of Fe-20Cr-xNi alloys , 2015 .

[6]  P. Slater,et al.  Laser machining of LaNi0.6M0.4O3−δ (M: Co, Fe) dip-coated on a Fe–22Cr mesh material to obtain a new contact coating for SOFC: Interaction between Crofer22APU interconnect and La0.6Sr0.4FeO3 cathode , 2015 .

[7]  Yunping Li,et al.  Effects of alloyed Si on the oxidation behaviour of Co–29Cr–6Mo alloy for solid-oxide fuel cell interconnects , 2015 .

[8]  Danting Yue,et al.  Three-dimensional CFD modeling of transport phenomena in multi-channel anode-supported planar SOFCs , 2015 .

[9]  I. Popa,et al.  Dual atmosphere study of the K41X stainless steel for interconnect application in high temperature water vapour electrolysis , 2015 .

[10]  P. Slater,et al.  Evaluation of using protective/conductive coating on Fe-22Cr mesh as a composite cathode contact material for intermediate solid oxide fuel cells , 2015 .

[11]  M. Salvo,et al.  Electrophoretic deposition of Mn1.5Co1.5O4 on metallic interconnect and interaction with glass-ceramic sealant for solid oxide fuel cells application , 2015 .

[12]  W. Wu,et al.  Contribution of properties of composite cathode and cathode/electrolyte interface to cell performance in a planar solid oxide fuel cell stack , 2015 .

[13]  Guoying Chen,et al.  Mn1.4Co1.4Cu0.2O4 spinel protective coating on ferritic stainless steels for solid oxide fuel cell interconnect applications , 2015 .

[14]  S. Anelli,et al.  K44M ferritic stainless steel as possible interconnect material for SOFC stack operating at 600 °C: Characterization of the oxidation behaviour at early working stages , 2015 .

[15]  L. Jian,et al.  Oxidation of MnCu0.5Co1.5O4 spinel coated SUS430 alloy interconnect in anode and cathode atmospheres for intermediate temperature solid oxide fuel cell , 2015 .

[16]  Qing-chun Yu,et al.  Fabrication of Co3O4 and La0.6Sr0.4CoO3−δ–Ce0.8Gd0.2O2−δ dual layer coatings on SUS430 steel by in-situ phase formation for solid oxide fuel cell interconnects , 2015 .

[17]  L. Latu-Romain,et al.  Possible connection between nodule development and presence of niobium and/or titanium during short time thermal oxidation of AISI 441 stainless steel in wet atmosphere , 2015 .

[18]  Á. G. Torre,et al.  Strontium and cobalt doped-lanthanum chromite: Characterisation of synthesised powders and sintered materials , 2015 .

[19]  G. Choi,et al.  Development of Cu1.3Mn1.7O4 spinel coating on ferritic stainless steel for solid oxide fuel cell interconnects , 2015 .

[20]  P. Slater,et al.  Characterization of LaNi0.6Fe0.4O3 perovskite synthesized by glycine-nitrate combustion method , 2015 .

[21]  L. D. Haart,et al.  Long-term behaviour of solid oxide fuel cell interconnect materials in contact with Ni-mesh during exposure in simulated anode gas at 700 and 800 °C , 2014 .

[22]  Dong Yan,et al.  A novel low Cr-containing Fe–Cr–Co alloy for metallic interconnects in planar intermediate temperature solid oxide fuel cells , 2014 .

[23]  G. Choi,et al.  Microstructural characterization and electrical conductivity of CuxMn3−xO4 (0.9≤x≤1.3) spinels produced by optimized glycine–nitrate combustion and mechanical milling processes , 2014 .

[24]  A. Masci,et al.  Degradation behavior of a commercial 13Cr ferritic stainless steel (SS405) exposed to an ambient air atmosphere for IT-SOFC interconnect applications , 2014 .

[25]  Shao-Long Wang,et al.  A modified liquid-phase-assisted sintering mechanism for La0.8Sr0.2Cr1−xFexO3−δ—A high density, redox-stable perovskite interconnect for solid oxide fuel cells , 2014 .

[26]  S. Liang,et al.  Fabrication of Mn–Co Spinel Coatings on Crofer 22 APU Stainless Steel by Electrophoretic Deposition for Interconnect Applications in Solid Oxide Fuel Cells , 2014 .

[27]  Yen‐Pei Fu,et al.  Characterization of Fe–Cr alloy metallic interconnects coated with LSMO using the aerosol deposition process , 2014 .

[28]  M. Arriortua,et al.  Effects of using (La0.8Sr0.2)0.95Fe0.6Mn0.3Co0.1O3 (LSFMC), LaNi0.6Fe0.4O3-δ (LNF) and LaNi0.6Co0.4O3-δ (LNC) as contact materials on solid oxide fuel cells , 2014 .

[29]  A. Safikhani,et al.  Effect of W and Ti addition on oxidation behavior and area-specific resistance of Fe–22Cr–0.5Mn ferritic stainless steel for SOFCs interconnect , 2014 .

[30]  D. Ou,et al.  Effect of pre-oxidation on the oxidation resistance of spinel-coated Fe–Cr ferritic alloy for solid oxide fuel cell applications , 2014 .

[31]  T. Brylewski,et al.  Oxidation properties of the Crofer 22 APU steel coated with La0.6Sr0.4Co0.2Fe0.8O3 for IT-SOFC interconnect applications , 2014, Journal of Thermal Analysis and Calorimetry.

[32]  Tao Chen,et al.  Evaluation of Ni80Cr20/(La0.75Sr0.25)0.95MnO3 dual layer coating on SUS 430 stainless steel used as metallic interconnect for solid oxide fuel cells , 2014 .

[33]  M. Arriortua,et al.  The effect of doping (Mn,B) 3 O 4 materials as protective layers in different metallic interconnects for Solid Oxide Fuel Cells , 2013 .

[34]  J. Svensson,et al.  Evaluation of the oxidation and Cr evaporation properties of selected FeCr alloys used as SOFC interconnects , 2013 .

[35]  E. Djurado,et al.  La0.7Sr0.3MnO3-coated SS444 alloy by dip-coating process for metallic interconnect supported Solid Oxide Fuel Cells , 2013 .

[36]  L. D. Haart,et al.  Long Term Resistivity Behavior of SOFC Interconnect/Ni-Mesh/Anode Interfaces , 2013 .

[37]  M. A. F. Sani,et al.  Effect of Sr and Ca dopants on oxidation and electrical properties of lanthanum chromite-coated AISI 430 stainless steel for solid oxide fuel cell interconnect application , 2013 .

[38]  M. Thuvander,et al.  The 475 °C embrittlement in Fe–20Cr and Fe–20Cr–X (X=Ni, Cu, Mn) alloys studied by mechanical testing and atom probe tomography , 2013 .

[39]  R. Song,et al.  Novel Ag–Glass Composite Interconnect Materials for Anode‐Supported Flat‐Tubular Solid Oxide Fuel Cells Operated at an Intermediate Temperature , 2013 .

[40]  Z. Yang,et al.  Long-term oxidation behavior of spinel-coated ferritic stainless steel for solid oxide fuel cell interconnect applications , 2013 .

[41]  Jong‐Won Lee,et al.  Cu- and Ni-doped Mn1.5Co1.5O4 spinel coatings on metallic interconnects for solid oxide fuel cells , 2013 .

[42]  M. M. Souza,et al.  Synthesis of La0.7Sr0.3MnO3 thin films supported on Fe–Cr alloy by sol–gel/dip-coating process: Evaluation of deposition parameters , 2013 .

[43]  Xingbo Liu,et al.  Studies on elements diffusion of Mn/Co coated ferritic stainless steel for solid oxide fuel cell interconnects application , 2013 .

[44]  E. E. Feistauer,et al.  Modification of the La0.6Sr0.4CoO3 coating deposited on ferritic stainless steel by spray pyrolysis after oxidation in air at high temperature , 2013 .

[45]  M. Ferraris,et al.  Mn1.5Co1.5O4 protective coating on Crofer22APU produced by thermal co-evaporation for SOFCs , 2013 .

[46]  G. Choi,et al.  In situ fabrication mechanism of a dense Sr and Ca doped lanthanum chromite interconnect on Ni-YSZ anode of a solid oxide fuel cell during co-sintering , 2013 .

[47]  KyooYoung Kim,et al.  Evaluation of Nb- or Mo-alloyed ferritic stainless steel as SOFC interconnect by using button cells , 2013 .

[48]  T. Brylewski,et al.  Mn–Co spinel protective–conductive coating on AL453 ferritic stainless steel for IT-SOFC interconnect applications , 2013, Journal of Solid State Electrochemistry.

[49]  J. Svensson,et al.  Long term study of Cr evaporation and high temperature corrosion behaviour of Co coated ferritic steel for solid oxide fuel cell interconnects , 2012 .

[50]  KyooYoung Kim,et al.  Effect of Ti addition on the electric and ionic property of the oxide scale formed on the ferritic stainless steel for SOFC interconnect , 2012 .

[51]  Fu-hui Wang,et al.  Oxidation and electrical behavior of ferritic stainless steel interconnect with Fe–Co–Ni coating by electroplating , 2012 .

[52]  P. Hendriksen,et al.  Efficient dual layer interconnect coating for high temperature electrochemical devices , 2012 .

[53]  C. Sung,et al.  Effects of pre-oxidation on the microstructural and electrical properties of La0.67Sr0.33MnO3−δ coated ferritic stainless steels , 2012 .

[54]  S. Fontana,et al.  Metallic Interconnects for Solid Oxide Fuel Cell: Performance of Reactive Element Oxide Coating During 10, 20 and 30 Months Exposure , 2012, Oxidation of Metals.

[55]  M. Arriortua,et al.  Oxide scale formation on different metallic interconnects for solid oxide fuel cells , 2012 .

[56]  Fu-hui Wang,et al.  Electroplated Ni-Fe2O3 composite coating for solid oxide fuel cell interconnect application , 2012 .

[57]  KyooYoung Kim,et al.  Molybdenum effect on oxidation resistance and electric conduction of ferritic stainless steel for SOFC interconnect , 2012 .

[58]  M. Rȩkas,et al.  Screen-printed (La,Sr)CrO3 coatings on ferritic stainless steel interconnects for solid oxide fuel cells using nanopowders prepared by means of ultrasonic spray pyrolysis , 2012 .

[59]  P. Hendriksen,et al.  Interaction mechanisms between slurry coatings and solid oxide fuel cell interconnect alloys during high temperature oxidation , 2012 .

[60]  Jong‐Won Lee,et al.  La-doped SrTiO3 interconnect materials for anode-supported flat-tubular solid oxide fuel cells , 2012 .

[61]  G. Choi,et al.  A novel approach to co-sintering of doped lanthanum chromite interconnect on Ni–YSZ anode substrate for SOFC applications , 2012 .

[62]  Chih-Kuang Lin,et al.  Effects of Nb and W additions on high-temperature creep properties of ferritic stainless steels for solid oxide fuel cell interconnect , 2012 .

[63]  Fu-hui Wang,et al.  Sputtered Ni coating on ferritic stainless steel for solid oxide fuel cell interconnect application , 2012 .

[64]  Preston White,et al.  Oxidation behavior of (Co,Mn)3O4 coatings on preoxidized stainless steel for solid oxide fuel cell interconnects , 2012 .

[65]  J. Stevenson,et al.  High performance ceramic interconnect material for solid oxide fuel cells (SOFCs): Ca- and transition metal-doped yttrium chromite , 2011 .

[66]  Norbert H. Menzler,et al.  Degradation of anode supported cell (ASC) performance by Cr-poisoning , 2011 .

[67]  L. Jian,et al.  NiMn2O4 spinel as an alternative coating material for metallic interconnects of intermediate temperature solid oxide fuel cells , 2011 .

[68]  A. Manivannan,et al.  Investigation of Mn/Co coated T441 alloy as SOFC interconnect by on-cell tests , 2011 .

[69]  M. Ferraris,et al.  Performance and testing of joined Crofer22APU-glass-ceramic sealant-anode supported cell in SOFC relevant conditions , 2011 .

[70]  E. Liu,et al.  A fundamental study of chromium deposition and poisoning at (La0.8Sr0.2)0.95(Mn1−xCox)O3 ± δ (0.0≤ x ≤1.0) cathodes of solid oxide fuel cells , 2011 .

[71]  M. Mori,et al.  Thermal Expansion Properties of Sr1 − xLaxTiO3 ( 0 ⩽ x ⩽ 0.3 ) Perovskites in Oxidizing and Reducing Atmospheres , 2010 .

[72]  J. Stevenson,et al.  Advanced ceramic interconnect material for solid oxide fuel cells: Electrical and thermal properties of calcium- and nickel-doped yttrium chromites , 2010 .

[73]  L. Jian,et al.  A promising NiCo2O4 protective coating for metallic interconnects of solid oxide fuel cells , 2010 .

[74]  E. Thomsen,et al.  Calcium- and Cobalt-Doped Yttrium Chromites as an Interconnect Material for Solid Oxide Fuel Cells , 2010 .

[75]  L. Jian,et al.  Development of a Fe-Cr alloy for interconnect application in intermediate temperature solid oxide fuel cells , 2010 .

[76]  Douglas G. Ivey,et al.  A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects , 2010 .

[77]  C. Chu,et al.  La0.6Sr0.4Co0.2Fe0.8O3 protective coatings for solid oxide fuel cell interconnect deposited by screen printing , 2010 .

[78]  Ming-Jui Tsai,et al.  High temperature oxidation behavior of interconnect coated with LSCF and LSM for solid oxide fuel cell by screen printing , 2010 .

[79]  G. Meng,et al.  Evaluation of simple, easily sintered La0.7Ca0.3Cr0.97 O3−δ perovskite oxide as novel interconnect material for solid oxide fuel cells , 2009 .

[80]  Xin Sun,et al.  Life prediction of coated and uncoated metallic interconnect for solid oxide fuel cell applications , 2009 .

[81]  G. Meng,et al.  Stable, easily sintered Ca-Zn-doped YCrO3 as novel interconnect materials for co-fired yttrium-stabilized zirconia-based solid oxide fuel cells , 2009 .

[82]  Weifeng Wei,et al.  Oxidation resistance and electrical properties of anodically electrodeposited Mn–Co oxide coatings for solid oxide fuel cell interconnect applications , 2009 .

[83]  C. Chu,et al.  Oxidation behavior of metallic interconnect coated with La–Sr–Mn film by screen painting and plasma sputtering , 2009 .

[84]  F. Tietz,et al.  MnCo1.9Fe0.1O4 spinel protection layer on commercial ferritic steels for interconnect applications in solid oxide fuel cells , 2008 .

[85]  L. Singheiser,et al.  Development of high strength ferritic steel for interconnect application in SOFCs , 2008 .

[86]  R. Oliveira,et al.  Development of lanthanum chromites-based materials for solid oxide fuel cell interconnects , 2008 .

[87]  Paul Gannon,et al.  Oxidation behavior of stainless steel 430 and 441 at 800 °C in single (air/air) and dual atmosphere (air/hydrogen) exposures , 2008 .

[88]  A. K. Tyagi,et al.  Low-Temperature Sintering of La(Ca)CrO3 Powder Prepared through the Combustion Process , 2007 .

[89]  Z. Yang,et al.  (Mn,Co)3O4 spinel coatings on ferritic stainless steels for SOFC interconnect applications , 2007 .

[90]  M. Viviani,et al.  Metallic interconnects for SOFC: Characterisation of corrosion resistance and conductivity evaluation at operating temperature of differently coated alloys , 2007 .

[91]  M. Bateni,et al.  Spinel coatings for UNS 430 stainless steel interconnects , 2007 .

[92]  P. Gannon.  Study of solid oxide fuel cell interconnects, protective coatings and advanced physical vapor deposition techniques , 2007 .

[93]  S. Geng,et al.  Promising alloys for intermediate-temperature solid oxide fuel cell interconnect application , 2006 .

[94]  H. Bing,et al.  Oxidation kinetics and phase evolution of a Fe–16Cr alloy in simulated SOFC cathode atmosphere , 2006 .

[95]  Z. Zhong.  Stoichiometric lanthanum chromite based ceramic interconnects with low sintering temperature , 2006 .

[96]  Srikanth Gopalan,et al.  Bi-layer structures as solid oxide fuel cell interconnections , 2006 .

[97]  Srikanth Gopalan,et al.  WITHDRAWN: Bi-layer structures as solid oxide fuel cell interconnections , 2006 .

[98]  Z. Yang,et al.  Long‐Term SOFC Stability with Coated Ferritic Stainless Steel Interconnect , 2008 .

[99]  Xing Chen,et al.  Automated design of a three-dimensional fishbone antenna using parallel genetic algorithm and NEC , 2005 .

[100]  Z. Yang,et al.  Thermal Growth and Performance of Manganese Cobaltite Spinel Protection Layers on Ferritic Stainless Steel SOFC Interconnects , 2005 .

[101]  J. Fergus.  Metallic interconnects for solid oxide fuel cells , 2005 .

[102]  L. C. Jonghe,et al.  Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties , 2005 .

[103]  Srikanth Gopalan.  BI-LAYER p-n JUNCTION INTERCONNECTIONS FOR COAL BASED SOLID OXIDE FUEL CELLS , 2005 .

[104]  N. Sakai,et al.  Lanthanum Chromite-Based Interconnects as Key Materials for SOFC Stack Development , 2005 .

[105]  D. Gelles,et al.  High-temperature oxidation resistance and surface electrical conductivity of stainless steels with filtered arc Cr–Al–N multilayer and/or superlattice coatings , 2004 .

[106]  J. Fergus.  Lanthanum chromite-based materials for solid oxide fuel cell interconnects , 2004 .

[107]  K. Kawamura,et al.  Oxidation behavior of Fe–16Cr alloy interconnect for SOFC under hydrogen potential gradient , 2004 .

[108]  S. Deevi,et al.  Opportunity of metallic interconnects for solid oxide fuel cells: a status on contact resistance , 2003 .

[109]  S. Deevi,et al.  Development of interconnect materials for solid oxide fuel cells , 2003 .

[110]  K. Kendall,et al.  High temperature solid oxide fuel cells : fundamentals, design and applicatons , 2003 .

[111]  A. Boudghene Stambouli,et al.  Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy , 2002 .

[112]  J. Stevenson,et al.  Thermal, Electrical, and Electrocatalytical Properties of Lanthanum-Doped Strontium Titanate , 2002 .

[113]  S. Singhal.  Advances in solid oxide fuel cell technology , 2000 .

[114]  W. Su,et al.  Mixed valence state and electrical conductivity of La1−xSrxCrO3 , 2000 .

[115]  S. Baskaran,et al.  Mechanical Properties of Calcium-Substituted Yttrium Chromite , 1999 .

[116]  K. Abiko.  The Evolution of Iron , 1997 .

[117]  J. Stevenson,et al.  The effect of reducing environments on the stability of acceptor substituted yttrium chromite , 1996 .

[118]  N. Sakai,et al.  Chemical Thermodynamic Considerations in Sintering of LaCrO3 ‐ Based Perovskites , 1991 .

[119]  K. Fukaya,et al.  Sintering of lanthanum chromite doped with zinc or copper , 1988 .