Aluminum and aluminum alloys as sources of hydrogen for fuel cell applications

Production of hydrogen using aluminum and aluminum alloys with aqueous alkaline solutions is studied. This process is based on aluminum corrosion, consuming only water and aluminum which are cheaper raw materials than other compounds used for in situ hydrogen generation, such as chemical hydrides. In principle, this method does not consume alkali because the aluminate salts produced in the hydrogen generation undergo a decomposition reaction that regenerates the alkali. As a consequence, this process could be a feasible alternative for hydrogen production to supply fuel cells. Preliminary results showed that an increase of base concentration and working solution temperature produced an increase of hydrogen production rate using pure aluminum. Furthermore, an improvement of hydrogen production rates and yields was observed varying aluminum alloys composition and increasing their reactive surface, with interesting results for Al/Si and Al/Co alloys. The development of this idea could improve yields and reduce costs in power units based on fuel cells which use hydrides as raw material for hydrogen production.

[1]  Kangnian Fan,et al.  Kinetics of hydrogen evolution in alkali leaching of rapidly quenched Ni-Al alloy , 2003 .

[2]  Kwi Seong Jeong,et al.  Fuel economy and life-cycle cost analysis of a fuel cell hybrid vehicle , 2002 .

[3]  A. Zhuk,et al.  Use of low-cost aluminum in electric energy production , 2006 .

[4]  Peter Hoffmann,et al.  Tomorrow's Energy: Hydrogen, Fuel Cells, and the Prospects for a Cleaner Planet , 2001 .

[5]  Fathi Habashi,et al.  A short history of hydrometallurgy , 2005 .

[6]  Mark A.J Cropper,et al.  Fuel cells: a survey of current developments , 2004 .

[7]  J. Casado,et al.  Electrocatalytic production of hydrogen boosted by organic pollutants and visible light , 2006 .

[8]  First-principles investigation of Mg(AlH4)2 complex hydride , 2006 .

[9]  Norbert Auner,et al.  Silicon as energy carrier—Facts and perspectives , 2006 .

[10]  W. Büchner.  Industrial Inorganic Chemistry , 1989 .

[11]  Boris M. Bulychev,et al.  Activation of aluminum metal and its reaction with water , 2005 .

[12]  Ulrich Eberle,et al.  Hydrogen storage in metal–hydrogen systems and their derivatives , 2006 .

[13]  Ausilio Bauen,et al.  Future energy sources and systems—Acting on climate change and energy security , 2006 .

[14]  J. Murray,et al.  ALUMINUM PRODUCTION USING HIGH-TEMPERATURE SOLAR PROCESS HEAT , 1999 .

[15]  A. Á. Gallegos,et al.  Recycling of aluminum to produce green energy , 2005 .

[16]  A. Streletskii,et al.  Mechanochemical Activation of Aluminum: 3. Kinetics of Interaction between Aluminum and Water , 2005 .

[17]  Kian-Lee Tan,et al.  Hydrogen uptake by carbon nanotubes , 2000 .

[18]  D. Belitskus.  Reaction of Aluminum with Sodium Hydroxide Solution as a Source of Hydrogen , 1970 .

[19]  M Momirlan,et al.  Current status of hydrogen energy , 2002 .

[20]  Andreas Züttel,et al.  Hydrogen sorption by carbon nanotubes and other carbon nanostructures , 2002 .