Scissor lift with real-time self-adjustment ability based on variable gravity compensation mechanism

Most robots involved in vertical movement against gravitation require actuators large enough to support their own weight. To improve the inherent safety of such robots against the large actuators and reduce their energy consumption, numerous gravity compensation mechanisms (GCMs) have been proposed. Our previous study proposed a variable GCM (VGCM) that uses two types of springs and can adjust the compensation force. In this paper, a VGCM-based scissor lift (pantograph lift) that uses three springs and a smaller actuator is proposed. A prototype is designed and fabricated, and the performance of the prototype is evaluated experimentally. The results demonstrate that the developed scissor lift meets the design specifications. In addition, a load estimator is established based on the dynamic model of the scissor lift. A real-time self-adjustment method that automatically changes the compensation force is proposed, and its effectiveness is verified. Graphical Abstract

[1]  Yasuhisa Sekiguchi,et al.  A Study on Improvement of Constant Repulsive Force Characteristic , 2008 .

[2]  Hideo Fujimoto,et al.  A new gravity compensation mechanism for lower limb rehabilitation , 2009, 2009 International Conference on Mechatronics and Automation.

[3]  Anand M. Sharan,et al.  The optimal balancing of the robotic manipulators , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[4]  Just L. Herder,et al.  Spring-to-Spring Balancing as Energy-Free Adjustment Method in Gravity Equilibrators , 2011 .

[5]  Tao Liu,et al.  Simulative calculation and optimal design of scissor lifting mechanism , 2009, 2009 Chinese Control and Decision Conference.

[6]  Luc Rolland,et al.  Dynamic analysis of Scissor Lift mechanism through bond graph modeling , 2014, 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[7]  Hideo Fujimoto,et al.  Design and Prototype of Variable Gravity Compensation Mechanism (VGCM) , 2011, J. Robotics Mechatronics.

[8]  Jae-Bok Song,et al.  Multi-DOF Counterbalance Mechanism for a Service Robot Arm , 2014, IEEE/ASME Transactions on Mechatronics.

[9]  Just L. Herder,et al.  ENERGY-FREE ADJUSTMENT OF GRAVITY EQUILIBRATORS, WITH APPLICATION IN A MOBILE ARM SUPPORT , 2006 .

[10]  J. M. Hervé.  Design of Spring Mechanisms for Balancing the Weight of Robots , 1987 .

[11]  J.L. Herder,et al.  Energy-Free Adjustment of Gravity Equilibrators Using the Virtual Spring Concept , 2007, 2007 IEEE 10th International Conference on Rehabilitation Robotics.

[12]  Gen Endo,et al.  A passive weight compensation mechanism with a non-circular pulley and a spring , 2010, 2010 IEEE International Conference on Robotics and Automation.

[13]  M. B. Widden,et al.  The spring-and-lever balancing mechanism, George Carwardine and the Anglepoise lamp , 2000 .

[14]  David L. Platus,et al.  Negative-stiffness-mechanism vibration isolation systems , 1992, Other Conferences.

[15]  Takeshi Mizuno,et al.  Vibration Isolation System Using Negative Stiffness , 2003 .

[16]  Vijay Kumar,et al.  Passive mechanical gravity compensation for robot manipulators , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[17]  Sadao Kawamura,et al.  Adaptive motion control of a robotic arm with movable counterweights , 2014, 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[18]  Kenan Koser,et al.  A cam mechanism for gravity-balancing , 2009 .

[19]  Tariq Rahman,et al.  A simple technique to passively gravity-balance articulated mechanisms , 1995 .

[20]  Weiping Li,et al.  Adaptive manipulator control a case study , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[21]  James R. Harris,et al.  An Investigation on the Dynamic Stability of Scissor Lift , 2012 .

[22]  R. H. Nathan.  A Constant Force Generation Mechanism , 1985 .

[23]  D. A. Streit,et al.  ‘Perfect’ Spring Equilibrators for Rotatable Bodies , 1989 .

[24]  Shigeki Sugano,et al.  A novel mechanism design for gravity compensation in three dimensional space , 2003, Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003).

[25]  W D van Dorsser,et al.  Energy-free adjustment of gravity equilibrators by adjusting the spring stiffness , 2008 .

[26]  David L. Platus,et al.  Negative-stiffness-mechanism vibration isolation systems , 1999, Optics + Photonics.

[27]  Romeo Ortega,et al.  Adaptive motion control of rigid robots: a tutorial , 1988, Proceedings of the 27th IEEE Conference on Decision and Control.

[28]  Jessica K. Hodgins,et al.  A passively safe and gravity-counterbalanced anthropomorphic robot arm , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).