Effect of cortical thickness and cancellous bone density on the holding strength of internal fixator screws

Internal fixators are a new class of implants designed to preserve the periosteal blood supply of the bone. In contrast to conventional plate fixation in which the screws have spherical heads and are loaded mainly by axial pullout forces, screws in internal fixators are “locked” within the plate and therefore subjected to axial as well as bending loads. In this study the ultimate loads of screws of a commercially available internal fixator system were tested in a pullout (n = 72) and cantilever bending mode (n = 72) in metaphyseal and diaphyseal regions of four pairs of human tibiae with different bone qualities. Cortical thickness and cancellous bone density were determined at the screw insertion sites. Stepwise multiple linear regression revealed that cortical thickness and cancellous density can explain 93% and 98% of the variance of the ultimate load of the screws in an axial pullout and cantilever bending mode. Screws in internal fixators are better suited to transmit shear forces and thereby make better use of the strength potential of bone than screws used in conventional plate fixation: this is especially advantageous when bone strength is reduced, e.g. due to osteoporosis. © 2004 Orthopaedic Research Society. Published by Elsevier Ltd. All rights reserved.

[1]  E. Schneider,et al.  Estimation of mechanical properties of cortical bone by computed tomography , 1991, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[2]  M. Dalstra,et al.  Age variations in the properties of human tibial trabecular bone and cartilage , 1997, Acta orthopaedica Scandinavica. Supplementum.

[3]  J Reeve,et al.  European semi-anthropomorphic phantom for the cross-calibration of peripheral bone densitometers: assessment of precision accuracy and stability. , 1994, Bone and mineral.

[4]  T. Harnroongroj,et al.  Determination of the role of the cancellous bone in generation of screw holding power at metaphysis. , 1999, Clinical biomechanics.

[5]  K. Radermacher,et al.  Critical evaluation of known bone material properties to realize anisotropic FE-simulation of the proximal femur. , 2000, Journal of biomechanics.

[6]  Peter Seitz,et al.  Fast Contour Detection Algorithm for High Precision Quantitative CT , 1983, IEEE Transactions on Medical Imaging.

[7]  C Krettek,et al.  Minimally invasive fracture stabilization of distal femoral fractures with the LISS: a prospective multicenter study. Results of a clinical study with special emphasis on difficult cases. , 2001, Injury.

[8]  R M Harrington,et al.  Cancellous bone screw thread design and holding power. , 1996, Journal of orthopaedic trauma.

[9]  D Mitton,et al.  Mechanical properties of ewe vertebral cancellous bone compared with histomorphometry and high-resolution computed tomography parameters. , 1998, Bone.

[10]  Ming Ding,et al.  Age variations in the properties of human tibial trabecular bone. , 1997, The Journal of bone and joint surgery. British volume.

[11]  R. Frigg,et al.  Locking Compression Plate (LCP). An osteosynthesis plate based on the Dynamic Compression Plate and the Point Contact Fixator (PC-Fix). , 2001, Injury.

[12]  Greg A. Brown,et al.  Mechanical performance of standard and cannulated 4.0‐mm cancellous bone screws , 2000, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[13]  A. Alho,et al.  Holding power of the 4.5 mm AO/ASIF cortex screw in cortical bone in relation to bone mineral. , 1993, Injury.

[14]  J. Schatzker,et al.  The holding power of orthopedic screws in vivo. , 1975, Clinical orthopaedics and related research.

[15]  E. Schneider,et al.  Implantatverankerung in osteoporotischem Knochen mittels monokortikaler Schrauben , 1999, Trauma und Berufskrankheit.

[16]  L. S. Matthews,et al.  Fatigue failure of cortical bone screws. , 1983, Journal of biomechanics.

[17]  A. Horsman,et al.  Effect of rotation on radiographic dimensions of the humerus and femur. , 1977, The British journal of radiology.

[18]  A L Jacob,et al.  Volumetric model determination of the tibia based on 2D radiographs using a 2D/3D database. , 2001, Computer aided surgery : official journal of the International Society for Computer Aided Surgery.

[19]  D J Downey,et al.  Optimizing Bone Screw Pullout Force , 1990, Journal of orthopaedic trauma.

[20]  S M Perren,et al.  Evolution and rationale of locked internal fixator technology. Introductory remarks. , 2001, Injury.

[21]  H. Zwart.  Rationing in The Netherlands: The liberal and the communitarian perspective , 1993, Health Care Analysis.

[22]  J. Medige,et al.  Effect of bone quality on the forces generated by compression screws. , 1999, Journal of biomechanics.

[23]  S. Perren,et al.  Basic concepts relevant to the design and development of the point Contact Fixator (PC-Fix) , 1995 .

[24]  T M Keaveny,et al.  The dependence of shear failure properties of trabecular bone on apparent density and trabecular orientation. , 1996, Journal of biomechanics.

[25]  R M Harrington,et al.  Factors affecting the pullout strength of cancellous bone screws. , 1996, Journal of biomechanical engineering.

[26]  S. Goldstein,et al.  Evaluation of orthogonal mechanical properties and density of human trabecular bone from the major metaphyseal regions with materials testing and computed tomography , 1991, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[27]  P Rüegsegger,et al.  Early detection of osteoarthritis by 3D computed tomography. , 1993, Technology and health care : official journal of the European Society for Engineering and Medicine.