Comparison of ozone production by DBDP reactors: difference external electrodes

Research on ozone generator performance technology of dielectric barrier discharge plasma (DBDP) has been conducted. The study was carried out by using two models of reactor configuration. The first model uses a wire mesh - aluminum foil configuration. The second model uses the wire mesh electrode configuration - wire mesh wrapped in aluminum foil. Ozone was generated using AC high Voltage. Oxygen that source of ozone has been taken from the water. The ozone was produced by DBDP reactor with voltage variation from 0.5 to 14 kV and a fixed air flow rate of 10 L / min. The first models of the reactor was Be Able to produce ozone of 138 ppm at a voltage of 14.3 kV with a maximum temperature of the inner reactor at 49 ° C. The second model of ozone produced with concentration of 163 ppm at a voltage of 14.2 kV and a maximum temperature of the inner reactor of 52 ° C. We found that reactor with wire mesh electrode configuration - wire mesh wrapped in aluminum foil can produce more high ozone concentration with the same voltage.

[1]  M. Nur,et al.  CHARACTERISTICS OF DIELECTRIC BARRIER DISCHARGE (DBD) AS AN OZONE GENERATOR REACTOR , 2018 .

[2]  A. Usman,et al.  Evaluation of Novel Integrated Dielectric Barrier Discharge Plasma as Ozone Generator , 2017 .

[3]  Gunawan,et al.  Study of ozone reactor with dielectric barrier discharge plasma (BDBP): variations of inner electrode based on Stainless steel, Galvalume, and Copper , 2016 .

[4]  S. A. Widyanto,et al.  Power consumption analysis DBD plasma ozone generator , 2016 .

[5]  H. Im,et al.  Ozone Production With Dielectric Barrier Discharge: Effects of Power Source and Humidity , 2016, IEEE Transactions on Plasma Science.

[6]  Anusuya Bhattacharyya,et al.  Biodiesel exhaust treatment with dielectric barrier discharges coupled with industrial waste byproducts , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[7]  Eric Moreau,et al.  Temperature characterization of dielectric barrier discharge actuators: influence of electrical and geometric parameters , 2014 .

[8]  Boonduang Surapon,et al.  Effect of Generating Heat on Ozone Generation in Dielectric Cylinder-Cylinder DBD Ozone Generator , 2013 .

[9]  Emmanuel Odic,et al.  Effect of voltage waveform on dielectric barrier discharge ozone production efficiency , 2012 .

[10]  P. Limsuwan,et al.  Effect of Oxygen Pressure and Flow Rate on Electrical Characteristic and Ozone Concentration of a Cylinder-Cylinder DBD Ozone Generator , 2012 .

[11]  Y. Qiu,et al.  Experimental study on discharge characteristics and ozone generation of dielectric barrier discharge in a cylinder–cylinder reactor and a wire–cylinder reactor , 2008 .

[12]  B. Langlais,et al.  Ozone Science & Engineering Special Issue on Quality Assurance in Ozone Practice , 1998 .

[13]  Michael Hirth,et al.  Ozone synthesis from oxygen in dielectric barrier discharges , 1987 .

[14]  J. M. Jameson,et al.  Quantitative Chemical Analysis , 1944, Nature.