Automatic starting control of tractor with a novel power-shift transmission

Abstract In this paper, a novel power-shift transmission using hydro-viscous drive (HVD) technology is proposed to improve starting comfort without affecting the drivetrain service life of a tractor. The tractor equipped with this novel power-shift transmission can realize stepless speed-regulation crawling. The structure of the tractor drivetrain, transmission scheme, gear ratios, and parameters of the HVD device are designed based on the operation requirements. The dynamical model of the drivetrain for tractor starting is established, and the control strategy for automatic starting of the tractor is developed to match this novel power-shift transmission. To verify the availability and effectiveness of this novel transmission in tractor automatic starting, a simulation model is established and the automatic starting processes under various driver's intentions are simulated. Accordingly, the simulation results show that this novel power-shift transmission cooperated with reasonable automatic control strategy can achieve a better starting effect. The tractor can realise ‘soft starting’ with small jerk as well as high comfort under starting intention of the driver. Moreover, the HVD device only works in the stage of hydro-viscous friction, which can prevent the failure of transmission caused by large temperature increase and contact friction.

[1]  Hong Jiang,et al.  Shift control strategy and experimental validation for dry dual clutch transmissions , 2014 .

[2]  Lei Yulong,et al.  A Research on Starting Control Strategy of Vehicle with AMT , 2000 .

[3]  Hugh Spikes,et al.  Thermal Behaviour of a Slipping Wet Clutch Contact , 2011 .

[5]  G. Willard Jenkins New John Deere Tractors 60 - 145 PTO HP , 1992 .

[6]  Dario Rotella,et al.  Direct analysis of power-split CVTs: A unified method , 2018 .

[7]  Younjoo Park,et al.  Analysis of shifting performance of power shuttle transmission , 2007 .

[8]  Tien-Chien Jen,et al.  Thermal analysis of a wet-disk clutch subjected to a constant energy engagement , 2008 .

[9]  Datong Qin,et al.  Multi-objective optimization design and performance evaluation for plug-in hybrid electric vehicle powertrains , 2017 .

[10]  Michael M. Khonsari,et al.  The Stribeck Curve: Experimental Results and Theoretical Prediction , 2006 .

[11]  Youfu Hou,et al.  Oil film hydrodynamic load capacity of hydro‐viscous drive with variable viscosity , 2011 .

[12]  Wim Desmet,et al.  Modeling and analysis of wet friction clutch engagement dynamics , 2015 .

[14]  Dongye Sun,et al.  Research on Economic Comprehensive Control Strategies of Tractor-Planter Combinations in Planting, Including Gear-Shift and Cruise Control , 2018 .

[15]  Michael M. Khonsari,et al.  Thermal and Dynamic Characterization of Wet Clutch Engagement With Provision for Drive Torque , 2001 .

[16]  Jianzhong Cui,et al.  Numerical investigation on thermal deformation of friction pair in hydro-viscous drive , 2015 .

[17]  M. Khonsari,et al.  On the wear prediction of the paper-based friction materialin a wet clutch , 2015 .

[18]  Giovanni Molari,et al.  Experimental evaluation of power losses in a power-shift agricultural tractor transmission , 2008 .

[19]  D. Dowson History of Tribology , 1979 .

[20]  Sun Qin,et al.  Soft Start-up Smoothness Of Hydro-viscous Drive (HVD) Set For Heavy-duty Motor , 2011 .

[21]  Dario Rotella,et al.  Functional design of power-split CVTs: An uncoupled hierarchical optimized model , 2017 .

[22]  J. Bouma,et al.  Future Directions of Precision Agriculture , 2005, Precision Agriculture.

[23]  Dongye Sun,et al.  Characteristic analysis on a new hydro-mechanical continuously variable transmission system , 2018, Mechanism and Machine Theory.

[24]  Xi Liu,et al.  Research on starting control of wet dual clutch transmission , 2010, 2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering.

[25]  Yan Li,et al.  Design and analysis of a novel wheel type continuously variable transmission , 2017 .