A review of typical PLD arrangements: Challenges, awareness, and solutions

[1]  G. Santhosh Kumar,et al.  Pulsed laser deposited Dy and Ta doped hafnium- zirconium oxide thin films for the high-k applications , 2023, Physica Scripta.

[2]  Xu Wang,et al.  Optimization of large-area YBa2Cu3O7-δ thin films by pulsed laser deposition for planar microwave devices , 2023, Chinese Physics B.

[3]  Narayana Thota,et al.  Electrochemical properties and performance of the pulsed laser deposited CZTS counter electrode-based DSSCs , 2023, Bulletin of Materials Science.

[4]  D. Pergolesi,et al.  A practical guide to pulsed laser deposition , 2023, Chemical Society reviews.

[5]  M. Momeni,et al.  Optical and structural properties of nitrogen incorporated Ni doped diamond-like carbon thin films , 2023, Optical and Quantum Electronics.

[6]  Thomas Attia Mih,et al.  The impact of multi-layered dielectrics on the electrical performance of ZnO thin-film transistors , 2023, Scientific African.

[7]  A. Goikhman,et al.  Enhanced Tribological Performance of Low-Friction Nanocomposite WSexSy/NP-W Coatings Prepared by Reactive PLD , 2023, Nanomaterials.

[8]  Chunlai Yang,et al.  Structure, principle, and application of magnetic field-assisted pulsed laser deposition: An overview , 2023, Vacuum.

[9]  H. Kılıç,et al.  Investigation of photocatalytic activity (under visible light) of ultrathin CZTS films produced in different thicknesses by PLD method , 2023, Optical and Quantum Electronics.

[10]  W. Setia Budi,et al.  GOLD AND SILVER NANOPARTICLES AS COMPUTED TOMOGRAPHY (CT) CONTRAST AGENTS PRODUCED BY A PULSED LASER ABLATION TECHNIQUE: STUDY In-vitro AND In-vivo , 2023, RASAYAN Journal of Chemistry.

[11]  T. Haugan,et al.  Impact of Calcium Doping of YBa2Cu3O7-δ Multilayer Thin Films on the Flux Pinning Landscape at 65–5 K, 0–9 T for Various Applications , 2023, IEEE Transactions on Applied Superconductivity.

[12]  S. Turitsyn,et al.  A Deep Reinforcement Learning Algorithm for Smart Control of Hysteresis Phenomena in a Mode-Locked Fiber Laser , 2022, Photonics.

[13]  I. Boerasu,et al.  Current Status of the Open-Circuit Voltage of Kesterite CZTS Absorber Layers for Photovoltaic Applications—Part I, a Review , 2022, Materials.

[14]  Bing Li,et al.  Preparation and characterization of Sb2(SxSe1−x)3 thin films deposited by pulsed laser deposition , 2022, Journal of Materials Science: Materials in Electronics.

[15]  V. Anyanwu,et al.  PLD of transparent and conductive AZO thin films , 2022, Ceramics International.

[16]  Q. Guo,et al.  Near infrared-II light-emitting devices based on Er-doped Ga2O3 films , 2022, Optical Materials.

[17]  D. L. Rocco,et al.  Top-down and bottom-up approaches to obtain magnetic nanoparticle of Fe3O4 compound: Pulsed laser deposition and chemical route , 2022, Materials Chemistry and Physics.

[18]  Haydar Abdulameer Marhoon,et al.  A comprehensive review on pulsed laser deposition technique to effective nanostructure production: trends and challenges , 2022, Optical and Quantum Electronics.

[19]  R. Eason,et al.  Motion control for laser machining via reinforcement learning. , 2022, Optics express.

[20]  Huanhuan Yan,et al.  A novel graphene tilt fiber grating sensor prepared by PLD and its photosensitive characteristics , 2022, Optik.

[21]  H. Kılıç,et al.  Theoretical Analysis of Solar Cell Performance with Different Backsurface‐Filed Layers Utilizing Experimental Results of CdS Films Deposited by Pulsed Laser , 2022, physica status solidi (a).

[22]  I. Mihailescu,et al.  Thin Film Fabrication by Pulsed Laser Deposition from TiO2 Targets in O2, N2, He, or Ar for Dye-Sensitized Solar Cells , 2022, Coatings.

[23]  J. Okazaki,et al.  Structural Characterization and Osseointegrative Properties of Pulsed Laser-Deposited Fluorinated Hydroxyapatite Films on Nano-Zirconia for Implant Applications , 2022, International journal of molecular sciences.

[24]  R. Delmdahl,et al.  Pulsed laser deposition – materials that matter , 2022, PhotonicsViews.

[25]  Yinyan Zhu,et al.  Pulsed laser deposition of large-sized superlattice films with high uniformity. , 2021, The Review of scientific instruments.

[26]  M. Mahdieh,et al.  Fabrication of silver nanoparticle films by pulsed laser deposition in flowless open air and studying the effects of laser fluence and number of pulses , 2021 .

[27]  Jingsong Wei,et al.  Pulsed Laser Deposition of the Protective and Anti-reflective DLC Film , 2021, Infrared Physics & Technology.

[28]  B. Mercimek,et al.  Determination of photovoltaic parameters of CIGS hetero junction solar cells produced by PLD technique, using SCAPS simulation program , 2021 .

[29]  A. Kietzig,et al.  In Situ Collection of Nanoparticles during Femtosecond Laser Machining in Air , 2021, Nanomaterials.

[30]  Izabela Constantinoiu,et al.  Synthesis Methods of Obtaining Materials for Hydrogen Sensors , 2021, Sensors.

[31]  Tian Jiang,et al.  Low-latency deep-reinforcement learning algorithm for ultrafast fiber lasers , 2021, Photonics Research.

[32]  J. M. López del Amo,et al.  High performance LATP thin film electrolytes for all-solid-state microbattery applications , 2021, Journal of Materials Chemistry A.

[33]  R. Teghil,et al.  Substituted Hydroxyapatite, Glass, and Glass-Ceramic Thin Films Deposited by Nanosecond Pulsed Laser Deposition (PLD) for Biomedical Applications: A Systematic Review , 2021, Coatings.

[34]  K. Li,et al.  Recent progress in high-entropy alloys for catalysts: synthesis, applications, and prospects , 2021 .

[35]  S. Brutti,et al.  Pulsed laser deposition of thin films of TiO2 for Li-ion batteries , 2021 .

[36]  B. Kooi,et al.  Pulsed laser deposited stoichiometric GaSb films for optoelectronic and phase change memory applications , 2021 .

[37]  Li Hongliang,et al.  V2O5-Au nanocomposite film cathode with enhanced electrochemical performance for lithium-ion micro batteries , 2021 .

[38]  Md. Fakhrul Islam,et al.  A Review of CZTS Thin Film Solar Cell Technology , 2021, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences.

[39]  L. Duta,et al.  Current Research in Pulsed Laser Deposition , 2021, Coatings.

[40]  L. Duta.  In Vivo Assessment of Synthetic and Biological-Derived Calcium Phosphate-Based Coatings Fabricated by Pulsed Laser Deposition: A Review , 2021, Coatings.

[41]  M. Samant,et al.  Material Preparation and Thin Film Growth , 2021, Handbook of Magnetism and Magnetic Materials.

[42]  J. Coey.  Magnetic Oxides and Other Compounds , 2021, Handbook of Magnetism and Magnetic Materials.

[43]  Jun Zou,et al.  Nanolayer Growth on 3-Dimensional Micro-Objects by Pulsed Laser Deposition , 2020, Nanomaterials.

[44]  L. Errico,et al.  Structural, vibrational and electronic properties in the glass-crystal transition of thin films Sb70Te30 doped with Sn , 2020, Journal of Alloys and Compounds.

[45]  W. Wang.  SnO2/TiO2 Nanocomposite Prepared by Pulsed Laser Deposition as Anode Material for Flexible Quasi-solid-state Lithium-Ion Batteries , 2020 .

[46]  B. Mercimek,et al.  The Effect of CZTS Ultrathin Film Thickness on the Electrical Characteristic of CZTS/Si Heterojunction Solar Cells in the Darkness and under the Illumination Conditions , 2020, Silicon.

[47]  Yong Cheng,et al.  A review on diamond-like carbon films grown by pulsed laser deposition , 2020 .

[48]  T. Razykov,et al.  Structural and morphological properties of PLD Sb2Se3 thin films for use in solar cells , 2020 .

[49]  M. A. El Khakani,et al.  Photoconversion Optimization of Pulsed-Laser-Deposited p-CZTS/n-Si-Nanowires Heterojunction-Based Photovoltaic Devices , 2020, Nanomaterials.

[50]  Steven L. Brunton,et al.  Deep reinforcement learning for optical systems: A case study of mode-locked lasers , 2020, Mach. Learn. Sci. Technol..

[51]  J. Santiso,et al.  Control of Lateral Composition Distribution in Graded Films of Soluble Solid Systems A1−xBx by Partitioned Dual-Beam Pulsed Laser Deposition , 2020, Coatings.

[52]  C. Julien,et al.  Pulsed laser–deposited Li2TiO3 thin film electrodes for energy storage , 2020, Journal of Solid State Electrochemistry.

[53]  B. Arcondo,et al.  SnSb2Te4: Microcrystalline sample vs thin film , 2020 .

[54]  Dongsik Kim,et al.  Femtosecond and nanosecond laser sintering of silver nanoparticles on a flexible substrate , 2020 .

[55]  J. M. Silveyra,et al.  Control System for the Synthesis of Thin Films by Pulsed Laser Deposition , 2020, IEEE Latin America Transactions.

[56]  Sai Wang,et al.  Optical and micro-structural properties of the uniform large-area carbon-based films prepared by pulsed laser deposition , 2020 .

[57]  Abdulaziz S. Alaboodi,et al.  Manufacturing Methods, Microstructural and Mechanical Properties Evolutions of High-Entropy Alloys: A Review , 2019, Metals and Materials International.

[58]  G. Yang,et al.  Production of large-area 2D materials for high-performance photodetectors by pulsed-laser deposition , 2019 .

[59]  A. Mauger,et al.  Pulsed Laser Deposited Films for Microbatteries , 2019, Coatings.

[60]  H. Ogawa,et al.  Femto- and nanosecond pulse duration dependence of the single-shot ablation threshold and multiple-shot morphology change of poly L-lactic acid in deep ultraviolet regime , 2019, Japanese Journal of Applied Physics.

[61]  G. Avdeev,et al.  Metal-oxide nanostructures produced by PLD in open air for gas sensor applications , 2019, Applied Surface Science.

[62]  R. Eason,et al.  Particulate reduction in PLD-grown crystalline films via bi-directional target irradiation , 2019, Applied Physics A.

[63]  P. Fan,et al.  Influence of annealed ITO on PLD CZTS thin film solar cell , 2019, Surface and Coatings Technology.

[64]  M. Fontana,et al.  Temperature Dependence of Electrical Resistance in Ge-Sb-Te Thin Films , 2019, Materials Research.

[65]  G. Socol,et al.  Pulsed Laser Deposition of Indium Tin Oxide Thin Films on Nanopatterned Glass Substrates , 2018, Coatings.

[66]  S. Bereznev,et al.  Pulsed Laser Deposition of Zn(O,Se) Layers for Optoelectronic Application , 2018, ACS Applied Energy Materials.

[67]  P. Fan,et al.  Preparation of low roughness CZTS thin film and solar cell by SMPLD method , 2018, Journal of Alloys and Compounds.

[68]  Luyuan Chen,et al.  In Vitro and In Vivo Osteogenic Activity of Titanium Implants Coated by Pulsed Laser Deposition with a Thin Film of Fluoridated Hydroxyapatite , 2018, International journal of molecular sciences.

[69]  V. Nazabal,et al.  Analysis of pulsed laser deposited amorphous chalcogenide film thickness distribution: Plume deflection angle dependence , 2018 .

[70]  D. Shepherd,et al.  Pulsed laser deposition of crystalline garnet waveguides at a growth rate of 20 μm per hour , 2017, Surface and Coatings Technology.

[71]  D. Shepherd,et al.  Dynamic control of refractive index during pulsed-laser-deposited waveguide growth , 2017 .

[72]  H. Bouyanfif,et al.  Laser fluence and spot size effect on compositional and structural properties of BiFeO 3 thin films grown by Pulsed Laser Deposition , 2017 .

[73]  J. Schou,et al.  Ultra-thin Cu2ZnSnS4 solar cell by pulsed laser deposition , 2017 .

[74]  Jari Liimatainen,et al.  Pulsed laser deposition of metal oxide nanostructures for highly sensitive gas sensor applications , 2016 .

[75]  M. Jelínek,et al.  Dual laser deposition of Ti:DLC composite for implants , 2016 .

[76]  H. Krebs,et al.  Largest possible deviations from stoichiometry transfer during pulsed laser deposition , 2016 .

[77]  J. M. Silveyra,et al.  Multi-ion and pH sensitivity of AgGeSe ion selective electrodes , 2016 .

[78]  Zidong Zhang,et al.  Large-Area, Low-Cost Infrared Metamaterial Fabrication Via Pulsed Laser Deposition with Metallic Mesh as a Shadow Mask , 2016, Plasmonics.

[79]  S. Yap,et al.  Nanostructured Diamond-Like Carbon Films Grown by Off-Axis Pulsed Laser Deposition , 2015 .

[80]  Soon Yie Kok,et al.  Femtosecond and nanosecond pulsed laser deposition of silicon and germanium , 2015 .

[81]  X. Zhong,et al.  Deposition of Bi3.15Nd0.85Ti3O12 ferroelectric thin films on 5-inch diameter Si wafers by a modified pulsed laser deposition method , 2015 .

[82]  M. Döbeli,et al.  Angular distribution of species in pulsed laser deposition of LaxCa1−xMnO3 , 2015 .

[83]  S. Naseem,et al.  Deposition and characterization of multilayer DLC:Mo thin films grown on silicon substrate by off-axis pulsed laser deposition technique , 2015 .

[84]  Jinhua Liu,et al.  Investigation of deposition rate, liquid droplets and surface morphology of zirconium films deposited by pulsed laser ablation , 2015 .

[85]  Pramod S. Patil,et al.  A review on pulsed laser deposited CZTS thin films for solar cell applications , 2015 .

[86]  M. Volosova,et al.  Plume propagation and Pt film growth during shadow-masked pulsed laser deposition in a buffer Ar gas , 2015 .

[87]  M. Xiao,et al.  Influence of laser pulse energy on the microstructure and optical properties of Cu2ZnSnS4 films by one-step pulsed laser deposition , 2014 .

[88]  J. Lunney,et al.  Comparison of nanosecond and femtosecond pulsed laser deposition of silver nanoparticle films , 2014, Nanotechnology.

[89]  M. Bizarro,et al.  Double-beam pulsed laser deposition for the growth of Al-incorporated ZnO thin films , 2014 .

[90]  A. Khare,et al.  Note: large area deposition of Rh single and Rh/W/Cu multilayer thin films on stainless steel substrate by pulsed laser deposition technique. , 2014, The Review of scientific instruments.

[91]  S. Grigoriev,et al.  Tribological properties of gradient Mo-Se-Ni-C thin films obtained by pulsed laser deposition in standard and shadow mask configurations , 2014 .

[92]  R. Vilar,et al.  Droplet distributions from melt displacement and ejection mechanism during Al ns-laser ablation and deposition experiments: Influence of laser spot position , 2014 .

[93]  P. Mukherjee,et al.  Enhanced magnetism and ferroelectricity in epitaxial Pb(Zr0.52Ti0.48)O3/CoFe2O4/La0.7Sr0.3MnO3 multiferroic heterostructures grown using dual-laser ablation technique , 2014 .

[94]  林晓东,et al.  Improvement of thickness uniformity and elements distribution homogeneity for multicomponent films prepared by coaxial scanning pulsed laser deposition technique , 2014 .

[95]  E. Broitman,et al.  Comparison of the properties of Pb thin films deposited on Nb substrate using thermal evaporation and pulsed laser deposition techniques , 2013 .

[96]  A. Pradel,et al.  Raman spectroscopy of GeSe and AgGeSe thin films , 2013 .

[97]  A. Pradel,et al.  Compositional dependence of the optical properties on amorphous Agx(Ge0.25Se0.75)100 − x thin films , 2013 .

[98]  J. Sakai,et al.  Epitaxial composition-graded perovskite films grown by a dual-beam pulsed laser deposition method , 2013 .

[99]  M. Volosova,et al.  Shadow masked pulsed laser deposition of WSex films: Experiment and modeling , 2013 .

[100]  H. Swart,et al.  Conversion of Y3(Al,Ga)5O12:Tb3+ to Y2Si2O7:Tb3+ thin film by annealing at higher temperatures , 2013 .

[101]  T. Yoshimura,et al.  Effect of Target Surface Microstructure on Morphological and Electrical Properties of Pulsed-Laser-Deposited BiFeO3 Epitaxial Thin Films , 2013 .

[102]  L. Escobar-Alarcón,et al.  Preparation of Co:TiO2 thin films by crossed-beam pulsed laser deposition , 2013 .

[103]  M. Jelínek.  Hybrid laser technology for biomaterials , 2013 .

[104]  M. S. Ramachandra Rao,et al.  25 years of pulsed laser deposition , 2013 .

[105]  J. Chu,et al.  Comparative study on Cu2ZnSnS4 thin films deposited by sputtering and pulsed laser deposition from a single quaternary sulfide target , 2012 .

[106]  S. Grigoriev,et al.  Pulsed laser deposition of composite Mo-Se-Ni-C coatings using standard and shadow mask configuration , 2012 .

[107]  P. Mukherjee,et al.  Advantages of dual-laser ablation in the growth of multicomponent thin films , 2012 .

[108]  P. Mukherjee,et al.  Role of dual-laser ablation in controlling the Pb depletion in epitaxial growth of Pb(Zr0.52Ti0.48)O3 thin films with enhanced surface quality and ferroelectric properties , 2012 .

[109]  M. Jelínek,et al.  Thin-Layer Hydroxyapatite Deposition on a Nanofiber Surface Stimulates Mesenchymal Stem Cell Proliferation and Their Differentiation into Osteoblasts , 2012, Journal of biomedicine & biotechnology.

[110]  J. Chu,et al.  Structure, composition and optical properties of Cu2ZnSnS4 thin films deposited by Pulsed Laser Deposition method , 2011 .

[111]  F. Bari,et al.  Homogeneous films by inverse pulsed laser deposition , 2011 .

[112]  A. Loir,et al.  Structure of diamondlike carbon films deposited by femtosecond and nanosecond pulsed laser ablation , 2010 .

[113]  M. Engelhard,et al.  Nonstoichiometric material transfer in the pulsed laser deposition of LaAlO3 , 2010 .

[114]  A. Perrone,et al.  Detailed studies of aluminum thin films morphology deposited by pulsed laser ablation , 2010 .

[115]  Kah-Yoong Chan,et al.  Effects of laser fluence on the structural properties of pulsed laser deposited ruthenium thin films , 2010 .

[116]  B. Arcondo,et al.  Ion selective electrodes based on chalcogenide glasses , 2010 .

[117]  E. Morîntale,et al.  Thin films development by pulsed laser-assisted deposition , 2010 .

[118]  S. Venkatachalam,et al.  Preparation and characterization of nano and microcrystalline ZnO thin films by PLD , 2009 .

[119]  B. Arcondo,et al.  Application of Ag―Ge―Se based chalcogenide glasses on ion-selective electrodes , 2009 .

[120]  D. Shepherd,et al.  Current state-of-the-art of pulsed laser deposition of optical waveguide structures: Existing capabilities and future trends , 2009 .

[121]  Emmanuel Haro-Poniatowski,et al.  Thin films of silver nanoparticles deposited in vacuum by pulsed laser ablation using a YAG:Nd laser , 2009 .

[122]  Miroslava Vrbová,et al.  Biocompatible layers fabricated using KrF laser , 2008, Photonics Prague.

[123]  Miroslav Jelinek,et al.  DLC coating of textile blood vessels using PLD , 2008 .

[124]  Z. Geretovszky,et al.  Inverse pulsed laser deposition , 2008 .

[125]  Jacques Perriere,et al.  Nanoparticle formation by femtosecond laser ablation , 2007 .

[126]  T. Tou,et al.  Target-plane deposition of diamond-like carbon in pulsed laser ablation of graphite , 2007 .

[127]  J. Schou,et al.  The spatial thickness distribution of metal films produced by large area pulsed laser deposition , 2007 .

[128]  Shigeki Sakai,et al.  Large-area pulsed-laser deposition of dielectric and ferroelectric thin films , 2007 .

[129]  Gerard M. O'Connor,et al.  Estimating spot size and relating hole diameters with fluence and number of shots for nanosecond and femtosecond laser ablation of polyethylene terephthalate , 2007 .

[130]  Michael Zeifman,et al.  Strong emission of particulates towards the incident beam direction in pulsed-laser ablation experiments , 2007 .

[131]  M. Senna,et al.  Reduction of large particles in the fibroin thin films prepared from near-IR pulsed laser deposition by target consolidation , 2007 .

[132]  A. Ureña,et al.  Characterisation of thin films obtained by laser ablation of Ge28Se60Sb12 glasses , 2007 .

[133]  A. Gorbunoff.  Cross‐Beam PLD: Metastable Film Structures from Intersecting Plumes , 2006 .

[134]  J. Greer.  Large‐Area Commercial Pulsed Laser Deposition , 2006 .

[135]  Michael Zeifman,et al.  Investigation of liquid droplets, plume deflection, and a columnar structure in laser ablation of silicon , 2006 .

[136]  H. Koinuma,et al.  Pulsed laser deposition of oxide thin films , 2006 .

[137]  J. Schou,et al.  Thickness determination of large-area films of yttria-stabilized zirconia produced by pulsed laser deposition , 2006 .

[138]  H. Koinuma,et al.  Improved stoichiometry and misfit control in perovskite thin film formation at a critical fluence by pulsed laser deposition , 2005 .

[139]  J. Lackner.  Industrially-scaled large-area and high-rate tribological coating by Pulsed Laser Deposition , 2005 .

[140]  T. Tou,et al.  Diamond-like carbon formation for various positions by pulsed laser deposition , 2005 .

[141]  Z. Geretovszky,et al.  Thickness distribution of carbon nitride films grown by inverse-pulsed laser deposition , 2005 .

[142]  C. Afonso,et al.  Competing processes during the production of metal nanoparticles by pulsed laser deposition , 2005 .

[143]  Salvatore Amoruso,et al.  Femtosecond laser pulse irradiation of solid targets as a general route to nanoparticle formation in a vacuum , 2005 .

[144]  F. Claeyssens,et al.  Pulsed laser ablation and deposition of thin films. , 2004, Chemical Society reviews.

[145]  M. I. Zeifman,et al.  Plume separation effect in pulsed laser ablation deposition , 2004 .

[146]  T. Yoshitake,et al.  The velocity distribution of droplets ejected from Fe and Si targets by pulsed laser ablation in a vacuum and their elimination using a vane-type velocity filter , 2004 .

[147]  Junichi Kawamura,et al.  Thin-film lithium-ion battery with amorphous solid electrolyte fabricated by pulsed laser deposition , 2004 .

[148]  A. Perrone,et al.  The pulsed laser ablation deposition technique: a new deposition configuration for the synthesis of uniform films , 2004 .

[149]  Hong-Ying Zhai,et al.  Continuous composition-spread thin films of transition metal oxides by pulsed-laser deposition , 2004 .

[150]  P. Molian,et al.  Femtosecond pulsed laser ablation and deposition of thin films of polytetrafluoroethylene , 2004 .

[151]  G. Jellison,et al.  A laser-deposition approach to compositional-spread discovery of materials on conventional sample sizes , 2004 .

[152]  I. Mihailescu,et al.  Particulates generation and solutions for their elimination in pulsed laser deposition , 2004 .

[153]  J. Conde,et al.  Extensive Studies of the Plume Deflection Angle During Laser Ablation of Si Target , 2003 .

[154]  K. Sturm,et al.  Pulsed Laser Deposition (PLD) -- A Versatile Thin Film Technique , 2003 .

[155]  T. Kanashima,et al.  Preparation and Characterization of High-k Praseodymium and Lanthanoid Oxide Thin Films Prepared by Pulsed Laser Deposition , 2003 .

[156]  A. Zocco,et al.  Detailed studies of the plume deflection effect during long laser irradiation of solid targets , 2002 .

[157]  Takeshi Kobayashi,et al.  Development of prominent PLD (Aurora method) suitable for high-quality and low-temperature film growth , 2002 .

[158]  Reiner Dietsch,et al.  Large area PLD of nanometer-multilayers , 2002 .

[159]  I. Mihailescu,et al.  Particulates-free Ta thin films obtained by pulsed laser deposition: the role of a second laser in the laser-induced plasma heating , 2002 .

[160]  P. Mukherjee,et al.  Evidence for the physical basis and universality of the elimination of particulates using dual-laser ablation. II. Dynamic time-resolved target reflectivity of metals and film growth of Zn , 2002 .

[161]  P. Sakthivel,et al.  Evidence for the physical basis and universality of the elimination of particulates using dual-laser ablation. I. Dynamic time-resolved target melt studies, and film growth of Y2O3 and ZnO , 2002 .

[162]  M. Fukutomi,et al.  A new laser plume scanning technique for uniform large area YBa2Cu3O7−x deposition , 2001 .

[163]  Nadezhda M. Bulgakova,et al.  Pulsed laser ablation of solids: transition from normal vaporization to phase explosion , 2001 .

[164]  E. Longo.  multilayer thin films prepared by a chemical route , 2001 .

[165]  P. P. Ong,et al.  Fabrication of TiN thin film by shadow-masked pulsed laser deposition , 2001 .

[166]  Michael N. R. Ashfold,et al.  Investigations of the plume accompanying pulsed ultraviolet laser ablation of graphite in vacuum , 2001 .

[167]  M. Graham,et al.  Ultrathin Ta2O5 films produced by large-area pulsed laser deposition , 2000 .

[168]  S. Kaciulis,et al.  Great reduction of particulates in pulsed laser deposition of Ag–Co films by using a shaded off-axis geometry , 2000 .

[169]  A. Marcu,et al.  Pulsed laser deposition of YBCO thin films in a shadow mask configuration , 2000 .

[170]  Hans-Ulrich Krebs,et al.  Pulsed laser deposition of metals in low pressure inert gas , 2000 .

[171]  P. Willmott,et al.  Pulsed laser vaporization and deposition , 2000 .

[172]  J. Lisoni,et al.  Off-axis pulsed laser deposition system for epitaxial oxide growth on substrates up to 2 inches in diameter , 1999 .

[173]  Minoru Tachiki,et al.  Manipulation of Laser Ablation Plume by Magnetic Field Application , 1999 .

[174]  B. Stritzker,et al.  Large area pulsed laser deposition of YBCO thin films , 1999 .

[175]  K. Ryu,et al.  Fabrication of large area superconducting thin film by pulsed laser scanning , 1999, IEEE Transactions on Applied Superconductivity.

[176]  V. Lantto,et al.  Surface Structure and Particulate Generation in Pb0.97Nd0.02(Zr0.55Ti0.45)O3 Ablation Targets During Pulsed Laser Deposition , 1999 .

[177]  Antonio Miotello,et al.  Pulsed laser deposition apparatus for applied research , 1999 .

[178]  N. Arnold,et al.  Uniform target ablation in pulsed-laser deposition , 1999 .

[179]  A. Miotello,et al.  On the origin of the different velocity peaks of particles sputtered from surfaces by laser pulses or charged-particle beams , 1999 .

[180]  C. Ong,et al.  A novel approach for doping impurity in thin film in situ by dual-beam pulsed-laser deposition , 1998 .

[181]  S. Senz,et al.  Epitaxial and large area PLD ferroelectric thin film heterostructures on silicon substrates , 1998 .

[182]  D. Givord,et al.  Highly Homogeneous Nanoparticulate Fe Films Prepared by Laser Ablation , 1998, 7th Joint MMM-Intermag Conference. Abstracts (Cat. No.98CH36275).

[183]  E. Kreutz,et al.  Large area pulsed laser deposition of ceramic films , 1997 .

[184]  M. Obara,et al.  Cobalt doping in BaTiO3 thin films by two-target pulsed KrF laser ablation with in situ laser annealing , 1997 .

[185]  S. Choopun,et al.  Stoichiometry and thickness variation of YBa2Cu3O7−x in pulsed laser deposition with a shadow mask , 1997 .

[186]  T. Kaiser,et al.  Large area deposition of YBCO-films by pulsed laser deposition for microwave applications , 1997 .

[187]  J. Greer,et al.  FUTURE TRENDS FOR LARGE-AREA PULSED LASER DEPOSITION , 1997 .

[188]  H. Itozaki,et al.  YBa2Cu3O7−x thin film over 3 in. substrate using off‐axis excimer laser deposition , 1996 .

[189]  S. Fähler,et al.  Calculations and experiments of material removal and kinetic energy during pulsed laser ablation of metals , 1996 .

[190]  Roger Kelly,et al.  Critical assessment of thermal models for laser sputtering at high fluences , 1995 .

[191]  Fu Rong.  LIQUID TARGET PULSED LASER DEPOSITION , 1995 .

[192]  R. Sharma,et al.  Stoichiometry and thickness variation of YBa2Cu3O7−x in off‐axis pulsed laser deposition , 1995 .

[193]  J. A. Greer,et al.  Large-area pulsed laser deposition: Techniques and applications , 1995 .

[194]  P. Mukherjee,et al.  Role of temporal delay in dual‐laser ablated plumes , 1995 .

[195]  P. Sakthivel,et al.  Dual‐laser ablation for particulate‐free film growth , 1995 .

[196]  C. Doughty,et al.  Steady state pulsed laser deposition target scanning for improved plume stability and reduced particle density , 1995 .

[197]  J. Greer,et al.  On - and Off -AXIS Large-Area Pulsed Laser Deposition , 1995 .

[198]  H. Börner,et al.  Large area pulsed laser deposition of YBCO thin films on 3-inch wafers , 1994 .

[199]  Yong Ki Park,et al.  Deposition angle‐dependent morphology of laser deposited YBa2Cu3O7 thin films , 1994 .

[200]  Takeshi Kobayashi,et al.  Improved Surface Smoothness of YBa2Cu3Oy Films and Related Multilayers by ArF Excimer Laser Deposition with Shadow Mask “Eclipse Method” , 1994 .

[201]  Y. Fan,et al.  Deposition of large area YBa2Cu3O7 superconducting films by laser scanning ablation , 1993 .

[202]  James A. Greer,et al.  Comparison of large-area pulsed-laser deposition approaches , 1993, Other Conferences.

[203]  Bernhard Roas,et al.  Off-axis laser deposition of YBa2Cu3O7-δ thin films , 1992 .

[204]  R. Kennedy.  A new laser ablation geometry for the production of smooth thin single-layer YBa2Cu3O7−x and multilayer YBa2Cu3O7−x/PrBa2Cu3O7−x films , 1992 .

[205]  A. Gupta,et al.  Synthesis of YBa2Cu3O7−δ films from separate oxide targets , 1992 .

[206]  J. Greer.  High quality YBCO films grown over large areas by pulsed laser deposition , 1992 .

[207]  D. J. Economou,et al.  Deposition of high quality YBa2Cu3O7−δ thin films over large areas by pulsed laser ablation with substrate scanning , 1991 .

[208]  R. Gijbels,et al.  Expansion of laser-generated plumes near the plasma ignition threshold , 1991 .

[209]  J. Greer,et al.  Laser-Ablation of Various Oxide Materials Over Large Areas , 1990 .

[210]  J. F. Flintoff,et al.  High-quality optical and epitaxial Ge films formed by laser evaporation , 1989 .

[211]  M. Croft,et al.  Systematics of thin films formed by excimer laser ablation: Results on SmBa2Cu3O7 , 1988 .

[212]  M. Dresselhaus,et al.  A model for pulsed laser melting of graphite , 1985 .

[213]  H. Newson.  On the Eccentricity of Plane Sections of Quadrics , 1889 .