Structural and mechanical characteristics of Mg–4Zn and Mg–4Zn–0.4Ca alloys after different thermal and mechanical processing routes

[1]  C. Desrayaud,et al.  Effect of Ca-addition on dynamic recrystallization of Mg–Zn alloy during hot deformation , 2013 .

[2]  F. Fereshteh-Saniee,et al.  The influences of extrusion and equal channel angular pressing (ECAP) processes on the fatigue behavior of AM60 magnesium alloy , 2013 .

[3]  F. Fereshteh-Saniee,et al.  Microstructural homogeneity, texture, tensile and shear behavior of AM60 magnesium alloy produced by extrusion and equal channel angular pressing , 2013 .

[4]  H. Bakhsheshi‐Rad,et al.  Relationship between the corrosion behavior and the thermal characteristics and microstructure of Mg–0.5Ca–xZn alloys , 2012 .

[5]  H. Bakhsheshi‐Rad,et al.  In-situ thermal analysis and macroscopical characterization of Mg–xCa and Mg–0.5Ca–xZn alloy systems , 2012 .

[6]  Baoping Zhang,et al.  Mechanical properties, degradation performance and cytotoxicity of Mg–Zn–Ca biomedical alloys with different compositions , 2011 .

[7]  Peter J. Uggowitzer,et al.  High-strength magnesium alloys for degradable implant applications , 2011 .

[8]  M. Zheng,et al.  Room-temperature compressive deformation behavior of Mg–Zn–Ca alloy processed by equal channel angular pressing , 2010 .

[9]  Kazuhiro Hono,et al.  Towards the development of heat-treatable high-strength wrought Mg alloys , 2010 .

[10]  M. Zheng,et al.  Influence of ECAP routes on microstructure and mechanical properties of Mg–Zn–Ca alloy , 2010 .

[11]  E. Angelini,et al.  Bio-corrosion characterization of Mg–Zn–X (X = Ca, Mn, Si) alloys for biomedical applications , 2010, Journal of materials science. Materials in medicine.

[12]  H. Chang,et al.  Microstructure and mechanical properties of Mg–Zn–Ca alloy processed by equal channel angular pressing , 2009 .

[13]  Y. Nishida,et al.  Improving corrosion resistance of RE-containing magnesium alloy ZE41A through ECAP , 2009 .

[14]  F. Pan,et al.  Comparison about effects of Ce, Sn and Gd additions on as-cast microstructure and mechanical properties of Mg–3.8Zn–2.2Ca (wt%) magnesium alloy , 2009 .

[15]  A. Singh,et al.  Microstructure evolution of Mg–Zn binary alloy during a direct extrusion process , 2009 .

[16]  L. Geng,et al.  Microstructure and mechanical properties of Mg–4.0Zn–0.5Ca alloy , 2009 .

[17]  Lei Yang,et al.  Microstructure, mechanical properties and bio-corrosion properties of Mg–Zn–Mn–Ca alloy for biomedical application , 2008 .

[18]  Frank Witte,et al.  Degradable biomaterials based on magnesium corrosion , 2008 .

[19]  Yufeng Zheng,et al.  The development of binary Mg-Ca alloys for use as biodegradable materials within bone. , 2008, Biomaterials.

[20]  R. Valiev,et al.  Principles of equal-channel angular pressing as a processing tool for grain refinement , 2006 .

[21]  B. Muddle,et al.  Precipitation-hardened Mg-Ca-Zn alloys with superior creep resistance , 2005 .

[22]  Kazuhiro Hono,et al.  TEM and 3DAP characterization of an age-hardened Mg–Ca–Zn alloy , 2005 .

[23]  M. Barnett,et al.  Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn , 2004 .

[24]  W. Kim,et al.  Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing , 2003 .

[25]  T. Larionova,et al.  A ternary phase observed in rapidly solidified Mg–Ca–Zn alloys , 2001 .

[26]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .