Fine Electron and Phonon Transports Manipulation by Mn Compensation for High Thermoelectric Performance of Sb2te3(Snte)N Materials

[1]  Xiao Xu,et al.  Microstructural Manipulation for Enhanced Average Thermoelectric Performance: A Case Study of Tin Telluride , 2023, ACS Applied Materials & Interfaces.

[2]  Z. Chen,et al.  Vacancy Manipulation Induced Optimal Carrier Concentration, Band Convergence and Low Lattice Thermal Conductivity in Nano‐Crystalline SnTe Yielding Superior Thermoelectric Performance , 2022, Advanced Functional Materials.

[3]  B. Ge,et al.  Interstitial Defects Facilitate Dense Dislocations and Band Convergence for High Thermoelectric Performance in SnTe , 2022, Chemistry of Materials.

[4]  X. Tan,et al.  Synergistic Optimizing Thermoelectric Performance of Snte by the Integrated Multi-Strategy , 2022, SSRN Electronic Journal.

[5]  M. Wuttig,et al.  Improved Solubility in Metavalently Bonded Solid Leads to Band Alignment, Ultralow Thermal Conductivity, and High Thermoelectric Performance in SnTe , 2022, Advanced Functional Materials.

[6]  Guiying Xu,et al.  Enabling High Quality Factor and Enhanced Thermoelectric Performance in BiBr3-Doped Sn0.93Mn0.1Te via Band Convergence and Band Sharpening. , 2022, ACS applied materials & interfaces.

[7]  X. Tan,et al.  High‐Performance Thermoelectric Material and Module Driven by Medium‐Entropy Engineering in SnTe , 2022, Advanced Functional Materials.

[8]  Woochul Kim,et al.  Higher-order anharmonicity leads to ultra-low thermal conductivity and high output power density of SnTe-based thermoelectric materials and modules , 2022, Materials Today Physics.

[9]  M. Zhang,et al.  Super-structured defects modulation for synergistically optimizing thermoelectric property in SnTe-based materials , 2022, Materials Today Physics.

[10]  Jun Jiang,et al.  Raised Solubility in SnTe by GeMnTe2 Alloying Enables Converged Valence Bands, Low Thermal Conductivity, and High Thermoelectric Performance , 2022, Nano Energy.

[11]  X. Chao,et al.  Synergy of Valence Band Modulation and Grain Boundary Engineering Leading to Improved Thermoelectric Performance in SnTe , 2021, ACS Applied Energy Materials.

[12]  R. Ang,et al.  Advancing thermoelectrics by vacancy engineering and band manipulation in Sb-doped SnTe–CdTe alloys , 2021, Applied Physics Letters.

[13]  Yong-liang Yu,et al.  Enhanced Thermoelectric Performance Achieved in SnTe via the Synergy of Valence Band Regulation and Fermi Level Modulation. , 2021, ACS applied materials & interfaces.

[14]  X. Chao,et al.  Strained Endotaxial PbS Nanoprecipitates Boosting Ultrahigh Thermoelectric Quality Factor in n-Type PbTe As-Cast Ingots. , 2021, Small.

[15]  Li-dong Zhao,et al.  Band convergence and nanostructure modulations lead to high thermoelectric performance in SnPb0.04Te-y% AgSbTe2 , 2021 .

[16]  Jie Gao,et al.  Optimized Electronic Bands and Ultralow Lattice Thermal Conductivity in Ag and Y Codoped SnTe. , 2021, ACS applied materials & interfaces.

[17]  K. Biswas,et al.  Enhanced Band Convergence and Ultra‐Low Thermal Conductivity Lead to High Thermoelectric Performance in SnTe , 2021, Angewandte Chemie.

[18]  Yongxin Qin,et al.  Realizing N-type SnTe Thermoelectrics with Competitive Performance through Suppressing Sn Vacancies. , 2021, Journal of the American Chemical Society.

[19]  G. Tan,et al.  Lead-free SnTe-based compounds as advanced thermoelectrics , 2021, Materials Today Physics.

[20]  Yue Chen,et al.  Mechanical alloying boosted SnTe thermoelectrics , 2021 .

[21]  Fancheng Meng,et al.  Enhancing thermoelectric performance of Sn1-Sb2/3Te via synergistic charge balanced compensation doping , 2021, Chemical Engineering Journal.

[22]  Di Wu,et al.  Constructing van der Waals gaps in cubic-structured SnTe-based thermoelectric materials , 2020 .

[23]  Geon‐Tae Hwang,et al.  Vacancy engineering in rock-salt type (IV-VI)x(V-VI) materials for high thermoelectric performance , 2020 .

[24]  Zhiyu Chen,et al.  Routes for advancing SnTe thermoelectrics , 2020 .

[25]  J. Zou,et al.  Advanced Thermoelectric Design: From Materials and Structures to Devices. , 2020, Chemical reviews.

[26]  G. J. Snyder,et al.  Weighted Mobility , 2020, Advanced materials.

[27]  Yue Chen,et al.  Vacancy Manipulation for Thermoelectric Enhancements in GeTe Alloys. , 2018, Journal of the American Chemical Society.

[28]  Haijun Wu,et al.  Entropy Engineering of SnTe: Multi‐Principal‐Element Alloying Leading to Ultralow Lattice Thermal Conductivity and State‐of‐the‐Art Thermoelectric Performance , 2018, Advanced Energy Materials.

[29]  Haijun Wu,et al.  Thermoelectric SnTe with Band Convergence, Dense Dislocations, and Interstitials through Sn Self-Compensation and Mn Alloying. , 2018, Small.

[30]  Yue Chen,et al.  Manipulation of Band Structure and Interstitial Defects for Improving Thermoelectric SnTe , 2018, Advanced Functional Materials.

[31]  Zhiwei Chen,et al.  Manipulation of Phonon Transport in Thermoelectrics , 2018, Advanced materials.

[32]  G. J. Snyder,et al.  High Thermoelectric Performance in SnTe–AgSbTe2 Alloys from Lattice Softening, Giant Phonon–Vacancy Scattering, and Valence Band Convergence , 2018 .

[33]  J. Zou,et al.  Eco‐Friendly SnTe Thermoelectric Materials: Progress and Future Challenges , 2017 .

[34]  Terry M. Tritt,et al.  Advances in thermoelectric materials research: Looking back and moving forward , 2017, Science.

[35]  Zhiwei Chen,et al.  Advances in Environment-Friendly SnTe Thermoelectrics , 2017 .

[36]  Xianli Su,et al.  Superparamagnetic enhancement of thermoelectric performance , 2017, Nature.

[37]  Jun Jiang,et al.  Manipulating Band Convergence and Resonant State in Thermoelectric Material SnTe by Mn–In Codoping , 2017 .

[38]  U. Waghmare,et al.  High Power Factor and Enhanced Thermoelectric Performance of SnTe-AgInTe2: Synergistic Effect of Resonance Level and Valence Band Convergence. , 2016, Journal of the American Chemical Society.

[39]  Gangjian Tan,et al.  Rationally Designing High-Performance Bulk Thermoelectric Materials. , 2016, Chemical reviews.

[40]  B. Vishal,et al.  The origin of low thermal conductivity in Sn1−xSbxTe: phonon scattering via layered intergrowth nanostructures , 2016 .

[41]  Tiejun Zhu,et al.  Enhancing the Figure of Merit of Heavy‐Band Thermoelectric Materials Through Hierarchical Phonon Scattering , 2016, Advanced science.

[42]  X. Tan,et al.  Band engineering and improved thermoelectric performance in M-doped SnTe (M = Mg, Mn, Cd, and Hg). , 2016, Physical chemistry chemical physics : PCCP.

[43]  Woochul Kim,et al.  Band Degeneracy, Low Thermal Conductivity, and High Thermoelectric Figure of Merit in SnTe-CaTe Alloys , 2016 .

[44]  Yue Chen,et al.  Synergistically optimized electrical and thermal transport properties of SnTe via alloying high-solubility MnTe , 2015 .

[45]  M. Kanatzidis,et al.  Valence Band Modification and High Thermoelectric Performance in SnTe Heavily Alloyed with MnTe. , 2015, Journal of the American Chemical Society.

[46]  Zhifeng Ren,et al.  Relationship between thermoelectric figure of merit and energy conversion efficiency , 2015, Proceedings of the National Academy of Sciences.

[47]  M. Kanatzidis,et al.  Codoping in SnTe: Enhancement of Thermoelectric Performance through Synergy of Resonance Levels and Band Convergence. , 2015, Journal of the American Chemical Society.

[48]  G. J. Snyder,et al.  Characterization of Lorenz number with Seebeck coefficient measurement , 2015 .

[49]  U. Waghmare,et al.  Mg Alloying in SnTe Facilitates Valence Band Convergence and Optimizes Thermoelectric Properties , 2015 .

[50]  Hui Sun,et al.  High thermoelectric performance of p-type SnTe via a synergistic band engineering and nanostructuring approach. , 2014, Journal of the American Chemical Society.

[51]  M. Kanatzidis,et al.  High-performance bulk thermoelectrics with all-scale hierarchical architectures , 2012, Nature.

[52]  Heng Wang,et al.  Convergence of electronic bands for high performance bulk thermoelectrics , 2011, Nature.

[53]  Jonathan D'Angelo,et al.  Nanostructuring and High Thermoelectric Efficiency in p‐Type Ag(Pb1 – ySny)mSbTe2 + m , 2006 .

[54]  M. Kanatzidis,et al.  Cubic AgPbmSbTe2+m: Bulk Thermoelectric Materials with High Figure of Merit , 2004, Science.

[55]  Burke,et al.  Generalized Gradient Approximation Made Simple. , 1996, Physical review letters.

[56]  Kresse,et al.  Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. , 1996, Physical review. B, Condensed matter.

[57]  H. Monkhorst,et al.  SPECIAL POINTS FOR BRILLOUIN-ZONE INTEGRATIONS , 1976 .

[58]  L. M. Rogers.  Valence band structure of SnTe , 1968 .

[59]  R. F. Brebrick,et al.  Anomalous Thermoelectric Power as Evidence for Two Valence Bands in SnTe , 1963 .

[60]  Xuan Zhao,et al.  Enhanced Thermoelectric Performance in High-Defect Snte Alloys: A Significant Role of Carrier Scattering , 2022, SSRN Electronic Journal.

[61]  X. Tan,et al.  Strengthened Phonon Scattering and Band Convergence Synergistically Realize High-Performance SnTe Thermoelectric , 2022, Journal of Materials Chemistry A.

[62]  K. Nielsch,et al.  Highly Tailored Gap-like Structure for Excellent Thermoelectric Performance , 2022, Energy & Environmental Science.

[63]  G. J. Snyder,et al.  Retarding Ostwald ripening through Gibbs adsorption and interfacial complexions leads to high-performance SnTe thermoelectrics , 2021, Energy & Environmental Science.

[64]  S. Yi,et al.  Optimized Mn and Bi co-doping in SnTe based thermoelectric material: A case of band engineering and density of states tuning , 2021 .

[65]  Xianli Su,et al.  Multi‐Scale Microstructural Thermoelectric Materials: Transport Behavior, Non‐Equilibrium Preparation, and Applications , 2017, Advanced materials.

[66]  M. Kanatzidis,et al.  Extraordinary role of Hg in enhancing the thermoelectric performance of p-type SnTe , 2015 .