Progressive concurrent topological optimization with variable fiber orientation and content for 3D printed continuous fiber reinforced polymer composites

[1]  V. Tita,et al.  A concurrent fibre orientation and topology optimisation framework for 3D-printed fibre-reinforced composites , 2022, Composites Science and Technology.

[2]  S. Ahzi,et al.  3D printed continuous fiber reinforced composite lightweight structures: A review and outlook , 2022, Composites Part B: Engineering.

[3]  Hong Xiao,et al.  Fusion-bonding performance of short and continuous carbon fiber synergistic reinforced composites using fused filament fabrication , 2022, Composites Part B: Engineering.

[4]  Kunkun Fu,et al.  Topology optimization of 3D-printed continuous fiber-reinforced composites considering manufacturability , 2022, Composites Science and Technology.

[5]  Zhelong He,et al.  Strength-based concurrent shape and fiber path optimization of continuous fiber composites , 2022, Computer Methods in Applied Mechanics and Engineering.

[6]  X. Tian,et al.  Three-dimensional printing of biomimetic variable stiffness composites with controlled orientations and volume fraction of fibers , 2022, Composite Structures.

[7]  Qing Li,et al.  Experimental study on interface failure behavior of 3D printed continuous fiber reinforced composites , 2022, Additive Manufacturing.

[8]  T. Okabe,et al.  A novel single-stroke path planning algorithm for 3D printers using continuous carbon fiber reinforced thermoplastics , 2022, Additive Manufacturing.

[9]  N. Vermaak,et al.  Experimental Investigations of the Effectiveness of Simultaneous Topology/Orientation Optimization via SOMP and Principal Stress Directions , 2022, Materials & Design.

[10]  A. Todoroki,et al.  3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective , 2022, Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers.

[11]  Liliang Ouyang,et al.  Roadmap for Additive Manufacturing: toward Intellectualization and Industrialization , 2022, Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers.

[12]  Dichen Li,et al.  Multiscale concurrent design and 3D printing of continuous fiber reinforced thermoplastic composites with optimized fiber trajectory and topological structure , 2022, Composite Structures.

[13]  Charlie C. L. Wang,et al.  Field-Based Toolpath Generation for 3D Printing Continuous Fibre Reinforced Thermoplastic Composites , 2021, Additive Manufacturing.

[14]  B. Fedulov,et al.  Optimization of parts manufactured using continuous fiber three-dimensional printing technology , 2021, Composites Part B: Engineering.

[15]  J. Yanagimoto,et al.  Density-based topology optimization integrated with genetic algorithm for optimizing formability and bending stiffness of 3D printed CFRP core sandwich sheets , 2021 .

[16]  M. Tehrani,et al.  Experimental investigation of additively manufactured continuous fiber reinforced composite parts with optimized topology and fiber paths , 2021, Additive Manufacturing.

[17]  Paul Maropoulos,et al.  Stress-oriented 3D printing path optimization based on image processing algorithms for reinforced load-bearing parts , 2021 .

[18]  Y. L. Yap,et al.  Additively manufactured continuous carbon fiber-reinforced thermoplastic for topology optimized unmanned aerial vehicle structures , 2021, Composites Part B: Engineering.

[19]  O. Sigmund,et al.  Topology optimization of multi-scale structures: a review , 2021, Structural and Multidisciplinary Optimization.

[20]  L. Ye,et al.  Topological design for 3D-printing of carbon fibre reinforced composite structural parts , 2021 .

[21]  Dichen Li,et al.  Optimization design and 3D printing of curvilinear fiber reinforced variable stiffness composites , 2021 .

[22]  J. Jelonnek,et al.  Load-dependent path planning method for 3D printing of continuous fiber reinforced plastics , 2021, Composites Part A: Applied Science and Manufacturing.

[23]  B. Hsiao,et al.  Elucidating the Opportunities and Challenges for Nanocellulose Spinning , 2020, Advanced materials.

[24]  P. K. Penumakala,et al.  A critical review on the fused deposition modeling of thermoplastic polymer composites , 2020 .

[25]  Christian Gout,et al.  Structural topology optimization with smoothly varying fiber orientations , 2020 .

[26]  G. D. Goh,et al.  3D Printing of Carbon Fiber Composite: The Future of Composite Industry? , 2020, Matter.

[27]  Dichen Li,et al.  A constitutive model for 3D printed continuous fiber reinforced composite structures with variable fiber content , 2020 .

[28]  Ali Yeilaghi Tamijani,et al.  Stiffness-based optimization framework for the topology and fiber paths of continuous fiber composites , 2020 .

[29]  M. Walter,et al.  Path-designed 3D printing for topological optimized continuous carbon fibre reinforced composite structures , 2020 .

[30]  Paolo Ermanni,et al.  Composite additive manufacturing of morphing aerospace structures , 2020 .

[31]  Daniel A. Tortorelli,et al.  Optimal design of fiber reinforced composite structures and their direct ink write fabrication , 2019, Computer Methods in Applied Mechanics and Engineering.

[32]  F. Antonov,et al.  Composite 3D printing for the small size unmanned aerial vehicle structure , 2019, Composites Part B: Engineering.

[33]  Dongjin Kim,et al.  Topology optimization for continuous and discrete orientation design of functionally graded fiber-reinforced composite structures , 2018, Composite Structures.

[34]  Damiano Pasini,et al.  Hip Implant Design With Three-Dimensional Porous Architecture of Optimized Graded Density , 2018, Journal of Mechanical Design.

[35]  Ole Sigmund,et al.  Giga-voxel computational morphogenesis for structural design , 2017, Nature.

[36]  K. McDonnell,et al.  Fabrication of Continuous Carbon, Glass and Kevlar fibre reinforced polymer composites using Additive Manufacturing , 2017 .

[37]  Garrett W. Melenka,et al.  Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures , 2016 .

[38]  Dichen Li,et al.  Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites , 2016 .