Heat transfer for falling film evaporation of industrially relevant fluids up to very high Prandtl numbers

In many industrial applications, falling film evaporation is an attractive technique for solvent removal due to high heat transfer and low residence times. Examples are the powder production in the dairy industry and in kraft pulp production process to remove water from so called black liquor. Common for both applications is that the fluids exhibit high viscosities in industrial practice. In this paper, results from experimental studies on both black liquor and a dairy product are reported for Prandtl numbers up to 800. The results are compared with several existing correlation in literature, and the need for a modified correlation is recognized especially to cover higher Prandtl-numbers. The following correlation for the turbulent flow region with 3 < Pr < 800 was derived from the data:$${\text{Nu}}_{t} = 0.0085 \cdot \text{Re}^{0.2} \cdot {\text{Pr}^{0.65}}$$Nut=0.0085·Re0.2·Pr0.65The correlation has been compared to literature data from one additional study on two other fluids (propylene glycol and cyclohexanol) with fairly high Prandtl-numbers, from 40 to 58 and from 45 to 155 respectively and the agreement was within ±40 %.

[1]  Hüseyin Pehlivan,et al.  Experimental and theoretical investigations of falling film evaporation , 2012 .

[2]  Michael T. Heath,et al.  Simultaneous heat and mass transfer in absorption of gases in turbulent liquid films , 1983 .

[3]  U. Renz,et al.  Experimentelle Untersuchung der Strömungscharakteristik und des Wärmeübergangs bei welligen Rieselfilmen , 2004 .

[4]  Lars Olausson,et al.  Heat transfer in evaporating black liquor falling film , 2009 .

[5]  M. Härkönen.  Heat transfer to evaporating falling films of water and sugar/water solution , 1994 .

[6]  Miriam Johansson.  Heat Transfer and Hydrodynamics in Falling Film Evaporation of Black Liquor , 2008 .

[7]  M. A. El-Masri,et al.  Momentum and heat transfer across freely-falling turbulent liquid films , 1986 .

[8]  P. De Jong,et al.  Design of falling‐film evaporators in the dairy industry , 1993 .

[9]  K. L. Ang.  Investigation of rheological properties of concentrated milk and the effect of these properties on flow within falling film evaporators , 2011 .

[10]  I. Leifer,et al.  Falling film hydrodynamics of black liquor under evaporative conditions , 2009 .

[11]  R. A. Seban,et al.  Heat Transfer to Evaporating Liquid Films , 1971 .

[12]  W. Nusselt.  Die Oberflachenkondensation des Wasserdampfes , 1916 .

[13]  Lennart Vamling,et al.  Heat transfer for falling film evaporation of black liquor up to very high Prandtl numbers , 2013 .

[14]  Fredrik Innings,et al.  Qualitative investigation of the flow behaviour during falling film evaporation of a dairy product , 2015 .

[15]  S. Scholl,et al.  Evaporation of pure liquids with increased viscosity in a falling film evaporator , 2009 .

[16]  S. Arndt,et al.  Evaporation of single component viscous liquids in a metal falling film evaporator , 2011 .

[17]  T. Berntsson,et al.  Surface evaporation of turbulent falling films , 1991 .

[18]  Aparajita Datta,et al.  Thermophysical properties of concentrated reconstituted milk during processing , 1994 .

[19]  Lennart Vamling,et al.  Falling film evaporation of black liquor – comparison with general heat transfer correlations , 2006 .