Predictive equations for lumbar spine loads in load-dependent asymmetric one- and two-handed lifting activities.

BACKGROUND Asymmetric lifting activities are associated with low back pain. METHODS A finite element biomechanical model is used to estimate spinal loads during one- and two-handed asymmetric static lifting activities. Model input variables are thorax flexion angle, load magnitude as well as load sagittal and lateral positions while response variables are L4-L5 and L5-S1 disc compression and shear forces. A number of levels are considered for each input variable and all their possible combinations are introduced into the model. Robust yet user-friendly predictive equations that relate model responses to its inputs are established. FINDINGS Predictive equations with adequate goodness-of-fit (R(2) ranged from ~94% to 99%, P≤0.001) that relate spinal loads to task (input) variables are established. Contour plots are used to identify combinations of task variable levels that yield spine loads beyond the recommended limits. The effect of uncertainties in the measurements of asymmetry-related inputs on spinal loads is studied. INTERPRETATION A number of issues regarding the NIOSH asymmetry multiplier are discussed and it is concluded that this multiplier should depend on the trunk posture and be defined in terms of the load vertical and horizontal positions. Due to an imprecise adjustment of the handled load magnitude this multiplier inadequately controls the biomechanical loading of the spine. Ergonomists and bioengineers, faced with the dilemma of using either complex but more accurate models on one hand or less accurate but simple models on the other hand, have hereby easy-to-use predictive equations that quantify spinal loads under various occupational tasks.

[1]  Maury A. Nussbaum,et al.  A Biomechanical Investigation of the Asymmetric Multiplier in the Revised NIOSH Lifting Equation , 1995 .

[2]  S. McGill.  Kinetic Potential of the Lumbar Trunk Musculature About Three Orthogonal Orthopaedic Axes in Extreme Postures , 1991, Spine.

[3]  P. Brazdil,et al.  Analysis of results , 1995 .

[4]  D B Chaffin,et al.  Postural effects on biomechanical and psychophysical weight-lifting limits. , 1994, Ergonomics.

[5]  A Plamondon,et al.  Comparison of trunk muscle forces and spinal loads estimated by two biomechanical models. , 2009, Clinical biomechanics.

[6]  N Arjmand,et al.  Wrapping of trunk thoracic extensor muscles influences muscle forces and spinal loads in lifting tasks. , 2006, Clinical biomechanics.

[7]  N Arjmand,et al.  Model and in vivo studies on human trunk load partitioning and stability in isometric forward flexions. , 2006, Journal of biomechanics.

[8]  A Plamondon,et al.  Pivoting with the load. An alternative for protecting the back in asymmetrical lifting. , 1993, Spine.

[9]  R W Norman,et al.  A simple polynomial that predicts low-back compression during complex 3-D tasks. , 1996, Ergonomics.

[10]  S. McGill.  The biomechanics of low back injury: implications on current practice in industry and the clinic. , 1997, Journal of biomechanics.

[11]  I A Stokes,et al.  Quantitative anatomy of the lumbar musculature. , 1999, Journal of biomechanics.

[12]  L. Claes,et al.  Intradiscal pressure together with anthropometric data--a data set for the validation of models. , 2001, Clinical biomechanics.

[13]  Tzu-Hsien Lee.  Psychophysically determined asymmetrical lifting capabilities for different frequencies and containers. , 2005, Industrial health.

[14]  M Parnianpour,et al.  Predictive equations to estimate spinal loads in symmetric lifting tasks. , 2011, Journal of biomechanics.

[15]  A Shirazi-Adl,et al.  Computation of trunk equilibrium and stability in free flexion-extension movements at different velocities. , 2008, Journal of biomechanics.

[16]  T R Waters,et al.  Accuracy of measurements for the revised NIOSH lifting equation. National Institute for Occupational Safety and Health. , 1998, Applied ergonomics.

[17]  W. E. Hoogendoorn,et al.  Flexion and Rotation of the Trunk and Lifting at Work Are Risk Factors for Low Back Pain: Results of a Prospective Cohort Study , 2000, Spine.

[18]  A Plamondon,et al.  A comparative study of two trunk biomechanical models under symmetric and asymmetric loadings. , 2010, Journal of biomechanics.

[19]  A Shirazi-Adl,et al.  Nonlinear gross response analysis of a lumbar motion segment in combined sagittal loadings. , 1988, Journal of biomechanical engineering.

[20]  G Pettet,et al.  Modelling the line of action for the oblique abdominal muscles using an elliptical torso model. , 2001, Journal of biomechanics.

[21]  A. Garg,et al.  Maximum acceptable weights and maximum voluntary isometric strengths for asymmetric lifting. , 1986, Ergonomics.

[22]  W S Marras,et al.  Spine loading during asymmetric lifting using one versus two hands. , 1998, Ergonomics.

[23]  A B Schultz,et al.  Biomechanical model calculation of muscle contraction forces: a double linear programming method. , 1988, Journal of biomechanics.

[24]  A Garg,et al.  Revised NIOSH equation for the design and evaluation of manual lifting tasks. , 1993, Ergonomics.

[25]  M. Parnianpour,et al.  Trunk biomechanical models based on equilibrium at a single-level violate equilibrium at other levels , 2007, European Spine Journal.

[26]  T B Leamon,et al.  Research to reality: a critical review of the validity of various criteria for the prevention of occupationally induced low back pain disability. , 1994, Ergonomics.

[27]  William S. Marras,et al.  Regression Models for Predicting Peak and Continuous Three-Dimensional Spinal Loads during Symmetric and Asymmetric Lifting Tasks , 1999, Hum. Factors.

[28]  J H van Dieën,et al.  When is a lifting movement too asymmetric to identify low-back loading by 2-D analysis? , 1998, Ergonomics.

[29]  N Arjmand,et al.  Sensitivity of kinematics-based model predictions to optimization criteria in static lifting tasks. , 2006, Medical engineering & physics.

[30]  W. Marras,et al.  An EMG-assisted model of loads on the lumbar spine during asymmetric trunk extensions. , 1993, Journal of biomechanics.

[31]  A Shirazi-Adl,et al.  Analysis of large compression loads on lumbar spine in flexion and in torsion using a novel wrapping element. , 2006, Journal of biomechanics.

[32]  M. Gatton,et al.  Computational model of the lumbar spine musculature: implications of spinal surgery. , 2003, Clinical biomechanics.

[33]  P. Leva.  Adjustments to Zatsiorsky-Seluyanov's segment inertia parameters. , 1996 .

[34]  D. Pearsall,et al.  Segmental inertial parameters of the human trunk as determined from computed tomography , 1996, Annals of Biomedical Engineering.

[35]  Patrick G. Dempsey,et al.  Application issues and theoretical concerns regarding the 1991 NIOSH equation asymmetry multiplier , 1999 .

[36]  A Mital,et al.  Psychophysical and physiological responses to lifting symmetrical and asymmetrical loads symmetrically and asymmetrically. , 1986, Ergonomics.

[37]  S. Taboun,et al.  An Evaluation of the NIOSH Lifting Equation: A Psychophysical and Biomechanical Investigation , 2002, International journal of occupational safety and ergonomics : JOSE.

[38]  Kenton R Kaufman,et al.  Correlation between active and passive isometric force and intramuscular pressure in the isolated rabbit tibialis anterior muscle. , 2003, Journal of biomechanics.

[39]  Swei-Pi Wu.  Maximum acceptable weights for asymmetric lifting of Chinese females. , 2003, Applied ergonomics.

[40]  B Han,et al.  The effect of asymmetry on psychophysical lifting capacity for three lifting types , 2005, Ergonomics.