Abstract We report results of a detailed experimental study on capillary properties of new composite structures produced by simultaneous sintering of fibers and particles. This study suggests a way to meet the contradictory requirements to produce efficient evaporator to be used e.g. in capillary pump loops (CPL). In CPL, a porous evaporator is responsible of the displacement of the working liquid absorbing heat by its vaporization and releasing this heat at a remote condenser. The permeability of the porous evaporator of an efficient capillary pump must be as large as possible, but simultaneously this pump has to produce the largest capillary pressure at level of vapor/liquid interface in pores of very small diameters. We investigated new sintered composite capillary structures; such materials have the possibility to take advantage of both fibers and powder. It was found when forming highly porous plane samples that different macrostructures can appear depending on the ratio of fibers and powder dimensions, and also of the thicknesses of the different layers. This is opening the road to the use of different macrostructures; the possibility to produce multilayer structures is very promising regarding optimization of the parameters pore diameters and permeability.
[1]
Nickolay Smirnov,et al.
Mathematical simulation for non-equilibrium droplet evaporation
,
2007
.
[2]
P. R. Mashaei,et al.
Effect of nanofluid on thermal performance of heat pipe with two evaporators; application to satellite equipment cooling
,
2015
.
[3]
Henry Smirnov,et al.
Transport Phenomena in Capillary-Porous Structures and Heat Pipes
,
2009
.
[4]
Michael J. Lalor,et al.
A study of heat transfer in heat pipe evaporators with metal fiber capillary structures
,
2012
.
[5]
Yunquan Su,et al.
Shape optimization and material gradient design of the sharp hot structure
,
2014
.