Nonlinear dynamic analysis of coupled gear-rotor-bearing system with the effect of internal and external excitations

Extensive studies on nonlinear dynamics of gear systems with internal excitation or external excitation respectively have been carried out. However, the nonlinear characteristics of gear systems under combined internal and external excitations are scarcely investigated. An eight-degree-of-freedom(8-DOF) nonlinear spur gear-rotor-bearing model, which contains backlash, transmission error, eccentricity, gravity and input/output torque, is established, and the coupled lateral-torsional vibration characteristics are studied. Based on the equations of motion, the coupled spur gear-rotor-bearing system(SGRBS) is investigated using the Runge-Kutta numerical method, and the effects of rotational speed, error fluctuation and load fluctuation on the dynamic responses are explored. The results show that a diverse range of nonlinear dynamic characteristics such as periodic motion, quasi-periodic motion, chaotic behaviors and impacts exhibited in the system are strongly attributed to the interaction between internal and external excitations. Significantly, the changing rotational speed could effectively control the vibration of the system. Vibration level increases with the increasing error fluctuation. Whereas the load fluctuation has an influence on the nonlinear dynamic characteristics and the increasing excitation force amplitude makes the vibration amplitude increase, the chaotic motion may be restricted. The proposed model and numerical results can be used for diagnosis of faults and vibration control of practical SGRBS.

[1]  Kuo Jao Huang,et al.  Dynamic Analyses of Gear Pairs Incorporating the Effect of Time-varying Lubrication Damping , 2011 .

[2]  Fu-Cheng Wang,et al.  Decoupled robust vibration control of an optical table , 2014 .

[3]  Francesco Pellicano,et al.  Dynamic optimization of spur gears , 2011 .

[4]  Woon Huei Chai,et al.  Bifurcation of a special line and plane symmetric Bricard linkage , 2011 .

[5]  Omar D. Mohammed,et al.  Dynamic modelling of a one-stage spur gear system and vibration-based tooth crack detection analysis , 2015 .

[6]  Haddar Mohamed,et al.  Effects of gear mesh fluctuation and defaults on the dynamic behavior of two-stage straight bevel system , 2014 .

[7]  Qinkai Han,et al.  Dynamic response analysis on torsional vibrations of wind turbine geared transmission system with uncertainty , 2015 .

[8]  Cheng Wang,et al.  Modified optimization and experimental investigation of transmission error, vibration and noise for double helical gears , 2016 .

[9]  Rajendra Singh,et al.  Interactions between time-varying mesh stiffness and clearance non-linearities in a geared system , 1991 .

[10]  Shijing Wu,et al.  Harmonic balance method implementation of nonlinear dynamic characteristics for compound planetary gear sets , 2015 .

[11]  Yahui Cui Dynamic Response of Geared Rotor System and the Effect of Clearance on Jump Characteristics of Amplitude , 2009 .

[12]  Rajendra Singh,et al.  Prediction of dynamic friction forces in spur gears using alternate sliding friction formulations , 2008 .

[13]  Hou-Tsan Lee,et al.  Adaptive speed/position control of induction motor based on SPR approach , 2014, Int. J. Control.

[14]  Ye Jianhuai Dynamic Response of Geared Rotor System and the Effect of Clearance on Jump Characteristics of Amplitude , 2009 .

[15]  Junping Du,et al.  Input–output decoupling by output feedback with disturbance attenuation of H∞ control for any square system , 2014, Int. J. Control.

[16]  Tang Jinyuan,et al.  Nonlinear dynamic characteristics of geared rotor bearing systems with dynamic backlash and friction , 2011 .

[17]  Paul E. Allaire,et al.  Modal reduction of geared rotor systems with general damping and gyroscopic effects , 2011 .

[18]  Francesco Pellicano,et al.  Corrigendum to: Optimum profile modifications of spur gears by means of genetic algorithms , 2012 .

[19]  Hui Ma,et al.  Effects of gear crack propagation paths on vibration responses of the perforated gear system , 2015 .

[20]  Hui Ma,et al.  Review on dynamics of cracked gear systems , 2015 .

[21]  Sandeep M. Vijayakar,et al.  A study of the relationship between the dynamic factors and the dynamic transmission error of spur gear pairs , 2007 .

[22]  Jinyuan Tang,et al.  Coupled translation-rotation vibration and dynamic analysis of face geared rotor system , 2015 .

[23]  M. Amarnath,et al.  Experimental investigations to establish correlation between Stribeck curve, specific film thickness and statistical parameters of vibration and sound signals in a spur gear system , 2016 .

[24]  Changjiang Zhou,et al.  Modeling and calculation of impact friction caused by corner contact in gear transmission , 2014 .

[25]  Kamal A. F. Moustafa,et al.  Mathematical modeling of gearbox including defects with experimental verification , 2012 .

[26]  Tianning Chen,et al.  Non-linear dynamics of gear pair with dynamic backlash subjected to combined internal and external periodic excitations , 2016 .

[27]  Cai-Wan Chang-Jian,et al.  Bifurcation and chaos of gear-rotor–bearing system lubricated with couple-stress fluid , 2015 .

[28]  H. Nevzat Özgüven,et al.  Nonlinear Dynamic Modeling of Gear-Shaft-Disk-Bearing Systems Using Finite Elements and Describing Functions , 2004 .

[29]  Rajendra Singh,et al.  Non-linear dynamics of a spur gear pair , 1990 .

[30]  Shihua Zhou,et al.  Nonlinear behavior of a spur gear pair transmission system with backlash , 2014 .

[31]  Giorgio Bonori,et al.  Non-smooth dynamics of spur gears with manufacturing errors , 2007 .

[32]  Sujatha Chandramohan,et al.  Experimental investigations of surface wear assessment of spur gear teeth , 2012 .

[33]  Ahmet Kahraman,et al.  Experiments on the relationship between the dynamic transmission error and the dynamic stress factor of spur gear pairs , 2013 .

[34]  Hui Ma Vibration Response Analysis of a Geared Rotor System Considering the Tip Relief , 2014 .

[35]  An Sung Lee,et al.  Coupled lateral and torsional vibration characteristics of a speed increasing geared rotor-bearing system , 2003 .

[36]  Hui Ma,et al.  Effects of tip relief on vibration responses of a geared rotor system , 2014 .

[37]  Anand Parey,et al.  Dynamic modelling of spur gear pair and application of empirical mode decomposition-based statistical analysis for early detection of localized tooth defect , 2006 .