Electrohydrodynamic printing of poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) electrodes with ratio-optimized surfactant

An electrohydrodynamic (EHD) printing process was optimized for the printing of a (3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) conductive polymer by manipulating the surface tension of a PEDOT:PSS solution. A stable cone-jet mode was confirmed by adjusting the process parameters of the EHD printing process, such as applied voltage, flow rate, and working distance. The addition of a nonionic surfactant, Triton X-100, enabled both printing of PEDOT:PSS conductive lines with widths ranging from 335 μm to 90 μm in a low-power operation (0.5 kV), as well as a 100-fold increase in conductivity of the PEDOT:PSS film compared with that of the pristine one. To utilize printed PEDOT:PSS lines for high functional applications, a multi-deposition technique was carried out, which results in a decrease in line resistance from 1.3 × 104 Ω mm−1 to 0.2 × 103 Ω mm−1.

[1]  Jianyong Ouyang,et al.  Solution‐Processed Metallic Conducting Polymer Films as Transparent Electrode of Optoelectronic Devices , 2012, Advanced materials.

[2]  Tobin J. Marks,et al.  σ-π molecular dielectric multilayers for low-voltage organic thin-film transistors , 2005 .

[3]  Robert D. Short,et al.  High conductivity PEDOT resulting from glycol/oxidant complex and glycol/polymer intercalation during vacuum vapour phase polymerisation , 2011 .

[4]  F. Chen,et al.  High‐Conductivity Poly(3,4‐ethylenedioxythiophene):Poly(styrene sulfonate) Film and Its Application in Polymer Optoelectronic Devices , 2005 .

[5]  Martijn Kemerink,et al.  Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitol , 2008 .

[6]  Jianyong Ouyang,et al.  Highly conductive PEDOT:PSS films prepared through a treatment with zwitterions and their application in polymer photovoltaic cells , 2010 .

[7]  Paul H. Wöbkenberg,et al.  Micron-scale patterning of high conductivity poly(3,4-ethylendioxythiophene):poly(styrenesulfonate) for organic field-effect transistors , 2010 .

[8]  Peter Andersson,et al.  The Origin of the High Conductivity of Poly(3,4-ethylenedioxythiophene)−Poly(styrenesulfonate) (PEDOT−PSS) Plastic Electrodes , 2006 .

[9]  Fabrication of organic flexible electrodes using transfer stamping process , 2009 .

[10]  Zhenan Bao,et al.  Patterning organic semiconductors using "dry" poly(dimethylsiloxane) elastomeric stamps for thin film transistors. , 2006, Journal of the American Chemical Society.

[11]  Jianyong Ouyang,et al.  Significant Conductivity Enhancement of Conductive Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) Films by Adding Anionic Surfactants into Polymer Solution , 2008 .

[12]  Jong-Hyun Ahn,et al.  Effect of PEDOT Nanofibril Networks on the Conductivity, Flexibility, and Coatability of PEDOT:PSS Films. , 2014, ACS applied materials & interfaces.

[13]  J. Reynolds,et al.  Line patterning for flexible and laterally configured electrochromic devices , 2005 .

[14]  J. Reynolds,et al.  Poly(3,4‐ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future , 2000 .

[15]  Joachim Luther,et al.  Influence of a novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells , 2012 .

[16]  Kangmin Kim,et al.  Spray deposition of electrohydrodynamically atomized polymer mixture for active layer fabrication in organic photovoltaics , 2011 .

[17]  Doyoung Byun,et al.  Pole-type ground electrode in nozzle for electrostatic field induced drop-on-demand inkjet head , 2008 .

[18]  Andrés Fabián Lasagni,et al.  Direct laser interference patterning of poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate) (PEDOT-PSS) thin films , 2009 .

[19]  Alan J. Heeger,et al.  Polymer light-emitting diodes with polyethylene dioxythiophene–polystyrene sulfonate as the transparent anode , 1997 .

[20]  P. Wang,et al.  Highly conductive PEDOT:PSS treated with formic acid for ITO-free polymer solar cells. , 2014, ACS applied materials & interfaces.

[21]  K. Choi,et al.  Deposition and characterization of silver nanowires embedded PEDOT:PSS thin films via electrohydrodynamic atomization , 2013 .

[22]  John A Rogers,et al.  Micro- and nanopatterning techniques for organic electronic and optoelectronic systems. , 2007, Chemical reviews.

[23]  Zhenan Bao,et al.  Highly Conductive and Transparent PEDOT:PSS Films with a Fluorosurfactant for Stretchable and Flexible Transparent Electrodes , 2012 .

[24]  H. Sirringhaus,et al.  High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits , 2000, Science.

[25]  Z. Xiong,et al.  Fine droplet generation using tunable electrohydrodynamic pulsation , 2015 .

[26]  K. Choi,et al.  Characterization of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) thin film deposited through electrohydrodynamic atomization technique , 2012 .

[27]  John A. DeFranco,et al.  Orthogonal Patterning of PEDOT:PSS for Organic Electronics using Hydrofluoroether Solvents , 2009 .

[28]  John A Rogers,et al.  High-resolution electrohydrodynamic jet printing. , 2007, Nature materials.

[29]  Y. Kim,et al.  Highly Conductive PEDOT:PSS Electrode with Optimized Solvent and Thermal Post‐Treatment for ITO‐Free Organic Solar Cells , 2011 .

[30]  A. Jaworek,et al.  Classification of the Modes of Ehd Spraying , 1999 .

[31]  Mats Andersson,et al.  Polymer Photovoltaic Cells with Conducting Polymer Anodes , 2002 .

[32]  Dago M. de Leeuw,et al.  I-Line lithography of poly-(3,4-ethylenedioxythiophene) electrodes and application in all-polymer integrated circuits , 2002 .

[33]  Jingkun Xu,et al.  Effective Approaches to Improve the Electrical Conductivity of PEDOT:PSS: A Review , 2015 .

[34]  J. Huang,et al.  Investigation of the Effects of Doping and Post‐Deposition Treatments on the Conductivity, Morphology, and Work Function of Poly(3,4‐ethylenedioxythiophene)/Poly(styrene sulfonate) Films , 2005 .

[35]  Udo Lang,et al.  Piezoresistive properties of PEDOT: PSS , 2009 .

[36]  Jianyong Ouyang,et al.  PEDOT:PSS films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells , 2011 .

[37]  Alexandra Garraud,et al.  Micropatterning PEDOT:PSS layers , 2013 .

[38]  Xin Xu,et al.  Photolithographic patterning of highly conductive PEDOT:PSS and its application in organic light‐emitting diodes , 2014 .

[39]  J. Lammers,et al.  Electro-hydrodynamic atomization of drug solutions for inhalation purposes. , 2001, Journal of applied physiology.

[40]  Keld West,et al.  Vapor-Phase Polymerization of 3,4-Ethylenedioxythiophene: A Route to Highly Conducting Polymer Surface Layers , 2004 .

[41]  Shangfeng Yang,et al.  High-efficiency ITO-free polymer solar cells using highly conductive PEDOT:PSS/surfactant bilayer transparent anodes , 2013 .

[42]  Furkan H. Isikgor,et al.  Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices , 2015, Journal of Materials Science: Materials in Electronics.

[43]  C. Alemán,et al.  Polyaniline, polypyrrole and poly(3,4-ethylenedioxythiophene) as additives of organic coatings to prevent corrosion , 2009 .

[44]  Jong-Hyun Ahn,et al.  Influence of nonionic surfactant-modified PEDOT:PSS on graphene , 2015 .

[45]  Isao Shimoyama,et al.  Micro-patterning of a conductive polymer and an insulation polymer using the Parylene lift-off method for electrochromic displays , 2011 .

[46]  Sung Cheol Yoon,et al.  High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives , 2010 .