3D-printing techniques in a medical setting: a systematic literature review
暂无分享,去创建一个
Philip Tack | Jan Victor | Paul Gemmel | Lieven Annemans | P. Gemmel | L. Annemans | J. Victor | P. Tack
[1] Andreas H. Gomoll,et al. Patient-specific implants for lateral unicompartmental knee arthroplasty , 2015, International Orthopaedics.
[2] Stephan Letzel,et al. Hearing assessment in dental practitioners and other academic professionals from an urban setting , 2014, Head & Face Medicine.
[3] Marcin Kozakiewicz,et al. Comparison of pre-bent titanium mesh versus polyethylene implants in patient specific orbital reconstructions , 2013, Head & Face Medicine.
[4] R. Ellis,et al. Computer-assisted hip resurfacing using individualized drill templates. , 2010, The Journal of arthroplasty.
[5] C. Tseng,et al. Computer-aided reconstruction of traumatic fronto-orbital osseous defects: aesthetic considerations. , 2004, Chang Gung medical journal.
[6] F. Fuchs,et al. The effect of antihypertensive agents on sleep apnea: protocol for a randomized controlled trial , 2014, Trials.
[7] Nicola Maffulli,et al. Reviewer acknowledgement 2014 , 2015, Journal of Orthopaedic Surgery and Research.
[8] Luc Renson,et al. Improved alignment and operating room efficiency with patient-specific instrumentation for TKA. , 2014, The Knee.
[9] Robert B Anderson,et al. Radiographic Outcomes of Preoperative CT Scan–Derived Patient-Specific Total Ankle Arthroplasty , 2015, Foot & ankle international.
[10] Xiang-Zhen Liu,et al. Digital surgical templates for managing high-energy zygomaticomaxillary complex injuries associated with orbital volume change: a quantitative assessment. , 2013, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[11] C. Pornrattanamaneewong,et al. A prospective randomised controlled study of patient-specific cutting guides compared with conventional instrumentation in total knee replacement. , 2013, The bone & joint journal.
[12] Arnulf Baumann,et al. Late Reconstruction of the Orbit With Patient-Specific Implants Using Computer-Aided Planning and Navigation. , 2015, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[13] Andrew D Pearle,et al. Patient specific cutting guides versus an imageless, computer-assisted surgery system in total knee arthroplasty. , 2013, The Knee.
[14] Leonardo Ciocca,et al. Accuracy of fibular sectioning and insertion into a rapid-prototyped bone plate, for mandibular reconstruction using CAD-CAM technology. , 2015, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[15] Kaoru Sasaki,et al. Mandibular reconstruction using plates prebent to fit rapid prototyping 3-dimensional printing models ameliorates contour deformity , 2014, Head & Face Medicine.
[16] Zhanglin Wu,et al. Evaluation of three-dimensional printing for internal fixation of unstable pelvic fracture from minimal invasive para-rectus abdominis approach: a preliminary report. , 2015, International journal of clinical and experimental medicine.
[17] Johan Bellemans,et al. Patient-specific Guides Do Not Improve Accuracy in Total Knee Arthroplasty: A Prospective Randomized Controlled Trial , 2013, Clinical orthopaedics and related research.
[18] Lisa L. Lattanza,et al. Preoperative Computer Simulation and Patient-specific Guides are Safe and Effective to Correct Forearm Deformity in Children , 2017, Journal of pediatric orthopedics.
[19] Chi Mao,et al. Applying Computer Techniques in Maxillofacial Reconstruction Using a Fibula Flap: A Messenger and an Evaluation Method , 2009, The Journal of craniofacial surgery.
[20] Ning Liu,et al. The value of patient-matched instrumentation in total knee arthroplasty. , 2012, The Journal of arthroplasty.
[21] B. Tomancok,et al. Cerebrovascular stereolithographic biomodeling for aneurysm surgery. Technical note. , 2004, Journal of neurosurgery.
[22] Euiseong Kim,et al. Autotransplantation of immature third molars using a computer-aided rapid prototyping model: a report of 4 cases. , 2013, Journal of endodontics.
[23] P. D'urso,et al. Custom cranioplasty using stereolithography and acrylic. , 2000, British journal of plastic surgery.
[24] Y-K Lee,et al. Improving pre-operative planning for complex total hip replacement with a Rapid Prototype model enabling surgical simulation. , 2013, The bone & joint journal.
[25] B. Boonen,et al. Preliminary experience with the patient-specific templating total knee arthroplasty , 2012, Acta orthopaedica.
[26] S. Hofmann,et al. Custom-fit minimally invasive total knee arthroplasty: effect on blood loss and early clinical outcomes , 2013, Knee Surgery, Sports Traumatology, Arthroscopy.
[27] Liesbeth Bruckers,et al. Functional and radiographic short-term outcome evaluation of the Visionaire system, a patient-matched instrumentation system for total knee arthroplasty. , 2013, The Journal of arthroplasty.
[28] H Moubarak,et al. Contribution of patient-specific cutting guides to lower limb alignment for total knee arthroplasty. , 2014, Orthopaedics & traumatology, surgery & research : OTSR.
[29] Seung-Jong Lee,et al. Clinical application of computer-aided rapid prototyping for tooth transplantation. , 2001, Australian endodontic journal : the journal of the Australian Society of Endodontology Inc.
[30] Andreas H. Gomoll,et al. Surgical and Functional Outcomes in Patients Undergoing Total Knee Replacement With Patient-Specific Implants Compared With “Off-the-Shelf” Implants , 2015, Orthopaedic journal of sports medicine.
[31] Christopher L. Peters,et al. Patient-specific Total Knee Arthroplasty Required Frequent Surgeon-directed Changes , 2013, Clinical orthopaedics and related research.
[32] Sang-Hoon Kang,et al. Maxillary Cutting Guide for Executing a Simulated Osteotomy and Removing the Bony Interference During Orthognathic Surgery , 2015 .
[33] Caroline Bennett,et al. Accuracy and early outcomes in medial unicompartmental knee arthroplasty performed using patient specific instrumentation. , 2014, The Knee.
[34] F. Hulsmans,et al. Patient-specific positioning guides for total knee arthroplasty: no significant difference between final component alignment and pre-operative digital plan except for tibial rotation , 2015, Knee Surgery, Sports Traumatology, Arthroscopy.
[35] T. Farias,et al. Use of prototyping in preoperative planning for patients with head and neck tumors , 2014, Head & neck.
[36] Ireneusz Kotela,et al. Patient-specific computed tomography based instrumentation in total knee arthroplasty: a prospective randomized controlled study , 2014, International Orthopaedics.
[37] Sang-Hoon Kang,et al. Verification of the usability of a navigation method in dental implant surgery: in vitro comparison with the stereolithographic surgical guide template method. , 2014, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[38] Matjaz Merc,et al. Error rate of multi-level rapid prototyping trajectories for pedicle screw placement in lumbar and sacral spine. , 2014, Chinese journal of traumatology = Zhonghua chuang shang za zhi.
[39] M. Hanasono,et al. Computer‐assisted design and rapid prototype modeling in microvascular mandible reconstruction , 2013, The Laryngoscope.
[40] N. Helmy,et al. Accuracy of Patient Specific Cutting Blocks in Total Knee Arthroplasty , 2014, BioMed research international.
[41] K. Daniilidis,et al. Positive side effects of Ca antagonists for osteoarthritic joints—results of an in vivo pilot study , 2015, Journal of Orthopaedic Surgery and Research.
[42] Gang Chai,et al. Reconstruction of Fronto-Orbital and Nasal Defects With Compound Epoxied Maleic Acrylate/Hydroxyapatite Implant Prefabricated With a Computer Design Program , 2011, Annals of plastic surgery.
[43] G. Goerres,et al. Improved positioning of the tibial component in unicompartmental knee arthroplasty with patient-specific cutting blocks , 2015, Knee Surgery, Sports Traumatology, Arthroscopy.
[44] Alcindo Silva,et al. Patient-specific instrumentation improves tibial component rotation in TKA , 2014, Knee Surgery, Sports Traumatology, Arthroscopy.
[45] Frank Hölzle,et al. Evaluation of computer-assisted mandibular reconstruction with vascularized iliac crest bone graft compared to conventional surgery: a randomized prospective clinical trial , 2014, Trials.
[46] Srivatsa Subramanya,et al. Reverse Shoulder Arthroplasty With Patient-specific Glenoid Implant Positioning Guides , 2014 .
[47] Clayton J. Adam,et al. The use of physical biomodelling in complex spinal surgery , 2007, European Spine Journal.
[48] Bin Bo,et al. Accurate reconstruction of discontinuous mandible using a reverse engineering/computer-aided design/rapid prototyping technique: a preliminary clinical study. , 2010, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[49] Masao Akagi,et al. Comparison of MRI- and CT-based patient-specific guides for total knee arthroplasty. , 2014, The Knee.
[50] K. Dai,et al. Computer-aided custom-made hemipelvic prosthesis used in extensive pelvic lesions. , 2007, The Journal of arthroplasty.
[51] C. Hurson,et al. Rapid prototyping in the assessment, classification and preoperative planning of acetabular fractures. , 2007, Injury.
[52] Joseph Shin,et al. Craniofacial Reconstruction Using Patient-Specific Implants Polyether Ether Ketone With Computer-Assisted Planning , 2015, The Journal of craniofacial surgery.
[53] Joseph P. Iannotti,et al. Three-dimensional imaging and templating improve glenoid implant positioning. , 2015, The Journal of bone and joint surgery. American volume.
[54] Raju Thomas,et al. Physical models of renal malignancies using standard cross-sectional imaging and 3-dimensional printers: a pilot study. , 2014, Urology.
[55] E. Keeve,et al. Craniomaxillofacial surgery planning based on 3D models derived from Cone-Beam CT data , 2013, Computer aided surgery : official journal of the International Society for Computer Aided Surgery.
[56] Bai Yun,et al. Application of rapid prototyping for temporomandibular joint reconstruction. , 2011, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[57] Peter Kessler,et al. Additive manufacturing for microvascular reconstruction of the mandible in 20 patients. , 2012, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[58] Peng Li,et al. Digital Design and Individually Fabricated Titanium Implants for the Reconstruction of Traumatic Zygomatico-Orbital Defects , 2013, The Journal of craniofacial surgery.
[59] Hans-Peter Meinzer,et al. The practical clinical value of three-dimensional models of complex congenitally malformed hearts. , 2009, The Journal of thoracic and cardiovascular surgery.
[60] Graeme West,et al. Operative efficiency and accuracy of patient‐specific cutting guides in total knee replacement , 2015, ANZ journal of surgery.
[61] Jean Ciurea,et al. A Personalized Stereotactic Fixture for Implantation of Depth Electrodes in Stereoelectroencephalography , 2014, Stereotactic and Functional Neurosurgery.
[62] Marcin Elgalal,et al. Treatment with individual orbital wall implants in humans - 1-Year ophthalmologic evaluation. , 2011, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[63] David A. Parker,et al. Patient-specific instrumentation for total knee arthroplasty does not match the pre-operative plan as assessed by intra-operative computer-assisted navigation , 2014, Knee Surgery, Sports Traumatology, Arthroscopy.
[64] Yang Yang,et al. Improved accuracy of 3D-printed navigational template during complicated tibial plateau fracture surgery , 2015, Australasian Physical & Engineering Sciences in Medicine.
[65] Wenhua Huang,et al. A Novel Preoperative Planning Technique Using a Combination of CT Angiography and Three-Dimensional Printing for Complex Toe-to-Hand Reconstruction , 2015, Journal of Reconstructive Microsurgery.
[66] I. Feiz-Erfan,et al. Patient-Specific Polyetheretherketone Implants for Repair of Craniofacial Defects , 2015, The Journal of craniofacial surgery.
[67] Liao Wang,et al. Revision of complex acetabular defects using cages with the aid of rapid prototyping. , 2013, The Journal of arthroplasty.
[68] R. Sieira Gil,et al. Surgical planning and microvascular reconstruction of the mandible with a fibular flap using computer-aided design, rapid prototype modelling, and precontoured titanium reconstruction plates: a prospective study. , 2015, The British journal of oral & maxillofacial surgery.
[69] William W. Lu,et al. A Novel Patient-Specific Navigational Template for Cervical Pedicle Screw Placement , 2009, Spine.
[70] Chenyuan Zhu,et al. Rehabilitation of maxillectomy defects with obturator prostheses fabricated using computer-aided design and rapid prototyping: a pilot study. , 2014, The International journal of prosthodontics.
[71] Nicolae Balc,et al. Cranioplasty with custom-made implants: analyzing the cases of 10 patients. , 2012, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[72] Shuichi Matsuda,et al. Developing a novel custom cutting guide for curved peri-acetabular osteotomy , 2013, International Orthopaedics.
[73] B. Boonen,et al. Intra-operative results and radiological outcome of conventional and patient-specific surgery in total knee arthroplasty: a multicentre, randomised controlled trial , 2013, Knee Surgery, Sports Traumatology, Arthroscopy.
[74] Le Xie,et al. A novel computer-assisted drill guide template for placement of C2 laminar screws , 2009, European Spine Journal.
[75] Alberto Bianchi,et al. Computer-aided design and computer-aided manufacturing cutting guides and customized titanium plates are useful in upper maxilla waferless repositioning. , 2015, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[76] Andrea Ferretti,et al. Evaluation of the accuracy of a patient-specific instrumentation by navigation , 2013, Knee Surgery, Sports Traumatology, Arthroscopy.
[77] J. Mason,et al. In-vivo alignment comparing patient specific instrumentation with both conventional and computer assisted surgery (CAS) instrumentation in total knee arthroplasty. , 2014, The Journal of arthroplasty.
[78] Nils-Claudius Gellrich,et al. Increasing the accuracy of orbital reconstruction with selective laser-melted patient-specific implants combined with intraoperative navigation. , 2015, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[79] Jackrit Suthakorn,et al. Three-dimensional aortic aneurysm model and endovascular repair: an educational tool for surgical trainees. , 2008, The International journal of angiology : official publication of the International College of Angiology, Inc.
[80] Randy E. Ellis,et al. The influence of osteophyte depiction in CT for patient-specific guided hip resurfacing procedures , 2015, International Journal of Computer Assisted Radiology and Surgery.
[81] J. Victor,et al. Virtual 3D planning and patient specific surgical guides for osteotomies around the knee: a feasibility and proof-of-concept study. , 2012, The bone & joint journal.
[82] Olivier Verborgt,et al. Patient-specific instrument guidance of glenoid component implantation reduces inclination variability in total and reverse shoulder arthroplasty. , 2016, Journal of shoulder and elbow surgery.
[83] R. Field,et al. Patient-matched total knee arthroplasty: does it offer any clinical advantages? , 2013, Acta orthopaedica Belgica.
[84] Joep Kraeima,et al. Accuracy of fibula reconstruction using patient-specific CAD/CAM reconstruction plates and dental implants: A new modality for functional reconstruction of mandibular defects. , 2015, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[85] Israel Chilvarquer,et al. Precise insertion of orthodontic miniscrews with a stereolithographic surgical guide based on cone beam computed tomography data: a pilot study. , 2011, The International journal of oral & maxillofacial implants.
[86] Hiroyuki Yamada,et al. Mandibular reconstruction using custom-made titanium mesh tray and particulate cancellous bone and marrow harvested from bilateral posterior ilia , 2014, Journal of plastic surgery and hand surgery.
[87] S. Descamps,et al. A comparison of patient-specific and conventional instrumentation for total knee arthroplasty: a multicentre randomised controlled trial. , 2015, The bone & joint journal.
[88] Claudio Belvedere,et al. Intra- and post-operative accuracy assessments of two different patient-specific instrumentation systems for total knee replacement , 2014, Knee Surgery, Sports Traumatology, Arthroscopy.
[89] Takehito Hananouchi,et al. Sagittal gap balancing with the concept of a single radius femoral component in posterior cruciate sacrificing total knee arthroplasty with patient-specific instrumentation , 2015, International Orthopaedics.
[90] T. Moopanar,et al. Component position alignment with patient‐specific jigs in total knee arthroplasty , 2014, ANZ journal of surgery.
[91] Masato Takabatake,et al. Multistep pedicle screw insertion procedure with patient-specific lamina fit-and-lock templates for the thoracic spine: clinical article. , 2013, Journal of neurosurgery. Spine.
[92] Marianne Huebner,et al. Temporomandibular custom hemi-joint replacement prosthesis: prospective clinical and kinematic study , 2011 .
[93] Peter Weinstock,et al. Optimizing cerebrovascular surgical and endovascular procedures in children via personalized 3D printing. , 2015, Journal of neurosurgery. Pediatrics.
[94] Harald Essig,et al. Patient specific implants (PSI) in reconstruction of orbital floor and wall fractures. , 2015, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[95] Thierry Chartier,et al. A new custom made bioceramic implant for the repair of large and complex craniofacial bone defects. , 2013, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[96] D. Baur,et al. A novel design of a computer-generated splint for vertical repositioning of the maxilla after Le Fort I osteotomy. , 2013, Oral surgery, oral medicine, oral pathology and oral radiology.
[97] Taku Sugawara,et al. Safe and Accurate Midcervical Pedicle Screw Insertion Procedure With the Patient-Specific Screw Guide Template System , 2015, Spine.
[98] K. Daniilidis,et al. A comparison of conventional and patient-specific instruments in total knee arthroplasty , 2014, International Orthopaedics.
[99] F. Migliavacca,et al. Percutaneous pulmonary valve implantation based on rapid prototyping of right ventricular outflow tract and pulmonary trunk from MR data. , 2007, Radiology.
[100] I. Harris,et al. A comparison of alignment using patient specific guides, computer navigation and conventional instrumentation in total knee arthroplasty. , 2014, The Knee.
[101] B. Boonen,et al. Patient-specific guide for revision of medial unicondylar knee arthroplasty to total knee arthroplasty , 2013, Acta orthopaedica.
[102] Claudio Belvedere,et al. Three‐dimensional implant position and orientation after total knee replacement performed with patient‐specific instrumentation systems , 2014, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[103] S. Lee,et al. Is TKA Using Patient-specific Instruments Comparable to Conventional TKA? A Randomized Controlled Study of One System , 2013, Clinical orthopaedics and related research.
[104] Yoshiharu Kawaguchi,et al. Development of a New Technique for Pedicle Screw and Magerl Screw Insertion Using a 3-Dimensional Image Guide , 2012, Spine.
[105] L. Nordsletten,et al. Comparison of planned and achieved implant position in total knee arthroplasty with patient-specific positioning guides , 2015, Acta orthopaedica.
[106] Jun Liu,et al. Application of EH Compound Artificial Bone Material Combined With Computerized Three-Dimensional Reconstruction in Craniomaxillofacial Surgery , 2010, The Journal of craniofacial surgery.
[107] Dietmar Werner Hutmacher,et al. Customised osteotomy guides and endoprosthetic reconstruction for periacetabular tumours , 2014, International Orthopaedics.
[108] Hyongnyun Kim,et al. Use of a real-size 3D-printed model as a preoperative and intraoperative tool for minimally invasive plating of comminuted midshaft clavicle fractures , 2015, Journal of Orthopaedic Surgery and Research.
[109] A. Lombardi,et al. Improved Accuracy of Alignment With Patient-specific Positioning Guides Compared With Manual Instrumentation in TKA , 2012, Clinical orthopaedics and related research.
[110] Judy Huang,et al. Quantitative Analysis of Dual-Purpose, Patient-Specific Craniofacial Implants for Correction of Temporal Deformity , 2015, Neurosurgery.
[111] Quan Yu,et al. Correction of maxillary deformity in infants with bilateral cleft lip and palate using computer-assisted design. , 2012, Oral surgery, oral medicine, oral pathology and oral radiology.
[112] J. Argenson,et al. Rotation in total knee arthroplasty: no difference between patient-specific and conventional instrumentation , 2013, Knee Surgery, Sports Traumatology, Arthroscopy.
[113] Yan Wang,et al. Clinical application of computer-designed polystyrene models in complex severe spinal deformities: a pilot study , 2010, European Spine Journal.
[114] Kai Zhang,et al. Personalised modified osteotomy using computer-aided design–rapid prototyping to correct thoracic deformities , 2011, International Orthopaedics.
[115] Wonse Park,et al. Clinical experiences of digital model surgery and the rapid-prototyped wafer for maxillary orthognathic surgery. , 2011, Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.
[116] Christopher G T Lim,et al. A Case Series of Rapid Prototyping and Intraoperative Imaging in Orbital Reconstruction , 2015, Craniomaxillofacial trauma & reconstruction.
[117] Frank Hölzle,et al. Computer-assisted Mandibular Reconstruction with Vascularized Iliac Crest Bone Graft , 2012, Aesthetic Plastic Surgery.
[118] Huifang Zhou,et al. Late Reconstruction of the Complex Orbital Fractures With Computer-Aided Design and Computer-Aided Manufacturing Technique , 2007, The Journal of craniofacial surgery.
[119] Lin Yin,et al. Surgical Guide Assistant Mandibular Distraction Osteogenesis and Sagittal Split Osteotomy in the Treatment of Hemifacial Microsomia , 2015, The Journal of craniofacial surgery.
[120] G. Pei,et al. Use of patient-specific templates in hip resurfacing arthroplasty: experience from sixteen cases , 2013, International Orthopaedics.
[121] Erwin Keeve,et al. RapidSplint: virtual splint generation for orthognathic surgery – results of a pilot series , 2014, Computer aided surgery : official journal of the International Society for Computer Aided Surgery.
[122] Hyung Woo Yim,et al. Facial Contouring Surgery with Custom Silicone Implants Based on a 3D Prototype Model and CT-Scan: A Preliminary Study , 2015, Aesthetic Plastic Surgery.
[123] Ralf Sodian,et al. Three-dimensional printing in cardiac surgery and interventional cardiology: a single-centre experience. , 2015, European journal of cardio-thoracic surgery : official journal of the European Association for Cardio-thoracic Surgery.
[124] A. Deshmukh,et al. Reducing blood loss in bilateral total knee arthroplasty with patient-specific instrumentation. , 2015, The Orthopedic clinics of North America.
[125] W. Hamilton,et al. Patient-specific instrumentation does not shorten surgical time: a prospective, randomized trial. , 2013, The Journal of arthroplasty.
[126] Ping Feiyun,et al. Simultaneous correction of bilateral temporomandibular joint ankylosis with mandibular micrognathia using internal distraction osteogenesis and 3-dimensional craniomaxillofacial models. , 2010, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[127] Jing Xie,et al. Infections During Induction Therapy of Protocol CCLG-2008 in Childhood Acute Lymphoblastic Leukemia: A Single-center Experience with 256 Cases in China , 2015, Chinese medical journal.
[128] Chengtao Wang,et al. Modular preoperative planning software for computer-aided oral implantology and the application of a novel stereolithographic template: a pilot study. , 2009, Clinical implant dentistry and related research.
[129] Alex H S Harris,et al. Component alignment during total knee arthroplasty with use of standard or custom instrumentation: a randomized clinical trial using computed tomography for postoperative alignment measurement. , 2014, The Journal of bone and joint surgery. American volume.
[130] Nicola J. Robertson,et al. Reconstruction of fetal and infant anatomy using rapid prototyping of post-mortem MR images , 2010, Insights into imaging.
[131] Chen Xu,et al. The use of customized cages in revision total hip arthroplasty for Paprosky type III acetabular bone defects , 2015, International Orthopaedics.
[132] Lai Gui,et al. Three-Dimensional Preoperative Design of Distraction Osteogenesis for Hemifacial Microsomia , 2014, The Journal of craniofacial surgery.
[133] Matjaz Merc,et al. A multi-level rapid prototyping drill guide template reduces the perforation risk of pedicle screw placement in the lumbar and sacral spine , 2013, Archives of Orthopaedic and Trauma Surgery.
[134] M Daniel,et al. Frontal sinus models and onlay templates in osteoplastic flap surgery , 2010, The Journal of Laryngology & Otology.
[135] Sara Condino,et al. Computer tomography prototyping and virtual procedure simulation in difficult cases of hip replacement surgery. , 2013, Surgical technology international.
[136] I. Harris,et al. Radiographic outcome of limb-based versus knee-based patient specific guides in total knee arthroplasty. , 2014, The Knee.
[137] Bulent Sacak,et al. Use of Rapid Prototyping in Prosthetic Auricular Restoration , 2009, The Journal of craniofacial surgery.
[138] Lei Zhang,et al. A novel method of computer aided orthognathic surgery using individual CAD/CAM templates: a combination of osteotomy and repositioning guides. , 2013, The British journal of oral & maxillofacial surgery.
[139] William M Mihalko. Patient-Specific Cutting Guides Were Not Better Than Conventional Instrumentation for Total Knee Arthroplasty. , 2015, The Journal of bone and joint surgery. American volume.
[140] Adel Abou-ElFetouh,et al. Clinical and radiographic evaluation of a computer-generated guiding device in bilateral sagittal split osteotomies. , 2014, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[141] B. Boonen,et al. No radiographic difference between patient-specific guiding and conventional Oxford UKA surgery , 2014, Knee Surgery, Sports Traumatology, Arthroscopy.
[142] Peter Kessler,et al. Interval cranioplasty with patient-specific implants and autogenous bone grafts--success and cost analysis. , 2014, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[143] W J Earwaker,et al. Cerebrovascular biomodelling: a technical note. , 1999, Surgical neurology.
[144] Guo Bai,et al. Preservation of the inferior alveolar neurovascular bundle in the osteotomy of benign lesions of the mandible using a digital template. , 2015, The British journal of oral & maxillofacial surgery.
[145] N. Girard,et al. Evidence appraisal of Malik HH, Darwood ARJ, Shaunak S, Kulatilake P, El-Hilly AA, Mulki O, Baskaradas A. Three-dimensional printing in surgery: a review of current surgical applications.: J Surg Res. 2015;199(2):512-522. , 2016, AORN journal.
[146] Karthik Devarajan,et al. Improved operative efficiency of free fibula flap mandible reconstruction with patient‐specific, computer‐guided preoperative planning , 2015, Head & neck.
[147] Carsten Perka,et al. Intraoperative navigation of patient-specific instrumentation does not predict final implant position. , 2015, The Journal of arthroplasty.
[148] Wei Tang,et al. Mirror imaging and preshaped titanium plates in the treatment of unilateral malar and zygomatic arch fractures. , 2011, Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.
[149] W H Wang,et al. Three-dimensional virtual technology in reconstruction of mandibular defect including condyle using double-barrel vascularized fibula flap. , 2013, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[150] R. Barrack,et al. Do Patient-specific Guides Improve Coronal Alignment in Total Knee Arthroplasty? , 2012, Clinical orthopaedics and related research.
[151] R. Barrack,et al. Patient specific cutting blocks are currently of no proven value. , 2012, The Journal of bone and joint surgery. British volume.
[152] Ferdinando Ferrara,et al. Implant positioning in TKA: comparison between conventional and patient-specific instrumentation. , 2015, Orthopedics.
[153] Nobuhiko Tanaka,et al. Application of full-scale three-dimensional models in patients with rheumatoid cervical spine , 2008, European Spine Journal.
[154] J. Franceschi,et al. 3D templating and patient-specific cutting guides (Knee-Plan) in total knee arthroplasty: postoperative CT-based assessment of implant positioning. , 2014, Orthopaedics & traumatology, surgery & research : OTSR.
[155] Robert L. Barrack,et al. Are Patient-specific Cutting Blocks Cost-effective for Total Knee Arthroplasty? , 2012, Clinical orthopaedics and related research.
[156] Paul S D'Urso,et al. Biomodeling as an Aid to Spinal Instrumentation , 2004, Spine.
[157] Zhi Huang,et al. Novel method of fabricating individual trays for maxillectomy patients by computer-aided design and rapid prototyping. , 2015, Journal of prosthodontics : official journal of the American College of Prosthodontists.
[158] K. Krishnan,et al. The Application of Rapid Prototyping Techniques in Cranial Reconstruction and Preoperative Planning in Neurosurgery , 2003, The Journal of craniofacial surgery.
[159] Carsten O Tibesku,et al. Improved femoral component rotation in TKA using patient-specific instrumentation. , 2014, The Knee.
[160] Philipp Fürnstahl,et al. Three-dimensional correction of distal radius intra-articular malunions using patient-specific drill guides. , 2013, The Journal of hand surgery.
[161] Max Zinser,et al. Computer-Designed Splints for Surgical Transfer of 3D Orthognathic Planning , 2015, Facial Plastic Surgery.
[162] Simon P. Frostick,et al. Patient-specific Targeting Guides for Glenoid Component Placement in Shoulder Arthroplasty: Technique and Initial Clinical Experience , 2014 .
[163] Ivan Ng,et al. Polyetheretherketone implants for the repair of large cranial defects: a 3-center experience. , 2014, Neurosurgery.
[164] B. Dawant,et al. Customized, Miniature Rapid-Prototype Stereotactic Frames for Use in Deep Brain Stimulator Surgery: Initial Clinical Methodology and Experience from 263 Patients from 2002 to 2008 , 2010, Stereotactic and Functional Neurosurgery.
[165] Harley Chan,et al. Value of preoperative mandibular plating in reconstruction of the mandible , 2014, Head & neck.
[166] P Merloz,et al. Posterior tibial slope accuracy with patient-specific cutting guides during total knee arthroplasty: A preliminary study of 50 cases. , 2015, Orthopaedics & traumatology, surgery & research : OTSR.
[167] John J Callaghan,et al. Reliability of templating with patient-specific instrumentation in total knee arthroplasty. , 2013, The journal of knee surgery.
[168] N. Kaneko,et al. Development of three-dimensional hollow elastic model for cerebral aneurysm clipping simulation enabling rapid and low cost prototyping. , 2015, World neurosurgery.
[169] Emmanuel Thienpont,et al. Total knee arthroplasty with patient-specific instruments improves function and restores limb alignment in patients with extra-articular deformity. , 2013, The Knee.
[170] M. Burgueño,et al. Polyetheretherketone custom-made implants for craniofacial defects: Report of 14 cases and review of the literature. , 2015, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[171] Zhi Yang Ng,et al. Computer-Designed PEEK Implants: A Peek Into The Future of Cranioplasty? , 2014, The Journal of craniofacial surgery.
[172] Andy Khye Soon Yew,et al. The radiological outcomes of patient-specific instrumentation versus conventional total knee arthroplasty , 2014, Knee Surgery, Sports Traumatology, Arthroscopy.
[173] Le Xie,et al. A novel computer‐assisted drill guide template for lumbar pedicle screw placement: a cadaveric and clinical study , 2009, The international journal of medical robotics + computer assisted surgery : MRCAS.
[174] Ziqiang Chen,et al. Application of 3D Rapid Prototyping Technology in Posterior Corrective Surgery for Lenke 1 Adolescent Idiopathic Scoliosis Patients , 2015, Medicine.
[175] Chunlin Hou,et al. Accuracy and efficacy of osteotomy in total knee arthroplasty with patient-specific navigational template. , 2015, International journal of clinical and experimental medicine.
[176] J. Bryan,et al. Comparison of acetabular shell position using patient specific instruments vs. standard surgical instruments: a randomized clinical trial. , 2014, The Journal of arthroplasty.
[177] Daniel Danielsson,et al. Rapid prototyped patient specific implants for reconstruction of orbital wall defects. , 2014, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[178] Yuki Kanno,et al. Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology , 2009, Journal of Artificial Organs.
[179] Emanuele Zavattero,et al. Primary and secondary reconstruction of complex craniofacial defects using polyetheretherketone custom-made implants. , 2015, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[180] Zheng Wang,et al. Accuracy and efficacy of thoracic pedicle screws in scoliosis with patient-specific drill template , 2012, Medical & Biological Engineering & Computing.
[181] A. Redaelli,et al. High accuracy in knee alignment and implant placement in unicompartmental medial knee replacement when using patient-specific instrumentation , 2013, Knee Surgery, Sports Traumatology, Arthroscopy.
[182] Rui Liu,et al. Application of computer-aided design osteotomy template for treatment of cubitus varus deformity in teenagers: a pilot study. , 2011, Journal of shoulder and elbow surgery.
[183] J. Poukens,et al. The Use of Rapid Prototyping in the Preoperative Planning of Distraction Osteogenesis of the Cranio-Maxillofacial Skeleton , 2003, Computer aided surgery : official journal of the International Society for Computer Aided Surgery.
[184] Kai-Nan An,et al. Temporomandibular custom hemijoint replacement prosthesis: prospective clinical and kinematic study. , 2012, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[185] R. Liu,et al. Preliminary application of computer‐assisted patient‐specific acetabular navigational template for total hip arthroplasty in adult single development dysplasia of the hip , 2011, The international journal of medical robotics + computer assisted surgery : MRCAS.
[186] Larry H. Hollier,et al. Review of "Quantitative Analysis of Dual-Purpose, Patient-Specific Craniofacial Implants for Correction of Temporal Deformity" by Zhong S, Huang GJ, Susarla SM, Swanson EW, Huang J, Gordon CR in Neurosurgery 11: 220-229, 2015. , 2015 .
[187] Patricia R Cury,et al. Clinical application of stereolithographic surgical guides for implant placement: preliminary results. , 2005, Journal of periodontology.
[188] Hu Long,et al. The Accuracy of Computer Image-Guided Template for Mandibular Angle Ostectomy , 2015, Aesthetic Plastic Surgery.
[189] D. Ross,et al. The rapid prototyping of anatomic models in pulmonary atresia. , 2006, The Journal of thoracic and cardiovascular surgery.
[190] Hong Xia,et al. Application of three-dimensional model in the management of irreducible atlanto-axial dislocation. , 2014, Acta orthopaedica et traumatologica turcica.
[191] T. Treasure,et al. Implantation of an individually computer-designed and manufactured external support for the Marfan aortic root. , 2013, Multimedia manual of cardiothoracic surgery : MMCTS.
[192] I. Harris,et al. A multi-planar CT-based comparative analysis of patient-specific cutting guides with conventional instrumentation in total knee arthroplasty. , 2014, The Journal of arthroplasty.
[193] Ricardo Curcio,et al. Use of models in surgical predictability of oral rehabilitations. , 2007, Acta cirurgica brasileira.
[194] S. Hofmann,et al. Patient-specific total knee arthroplasty: the importance of planning by the surgeon , 2013, Knee Surgery, Sports Traumatology, Arthroscopy.
[195] Timm Steiner,et al. Patient-Specific Implants Compared With Stored Bone Grafts for Patients With Interval Cranioplasty , 2014, The Journal of craniofacial surgery.
[196] Manabu Kanazawa,et al. Evaluation of a complete denture trial method applying rapid prototyping. , 2012, Dental materials journal.
[197] Philipp Fürnstahl,et al. Three-dimensional postoperative accuracy of extra-articular forearm osteotomies using CT-scan based patient-specific surgical guides , 2015, BMC Musculoskeletal Disorders.
[198] Haisong Xu,et al. Combined Use of Rapid-Prototyping Model and Surgical Guide in Correction of Mandibular Asymmetry Malformation Patients With Normal Occlusal Relationship , 2015, The Journal of craniofacial surgery.
[199] P. Docquier,et al. Patient-specific instruments for surgical resection of painful tarsal coalition in adolescents. , 2014, Orthopaedics & traumatology, surgery & research : OTSR.
[200] B. Ying,et al. Correction of facial asymmetry associated with vertical maxillary excess and mandibular prognathism by combined orthognathic surgery and guiding templates and splints fabricated by rapid prototyping technique. , 2015, International journal of oral and maxillofacial surgery.
[201] Denis Nam,et al. Planned Bone Resections Using an MRI-Based Custom Cutting Guide System Versus 3-Dimensional, Weight-Bearing Images in Total Knee Arthroplasty. , 2015, The Journal of arthroplasty.
[202] Denis Nam,et al. The Mark Coventry Award: Custom Cutting Guides Do Not Improve Total Knee Arthroplasty Clinical Outcomes at 2 Years Followup , 2016, Clinical orthopaedics and related research.
[203] S David Stulberg,et al. Does Implant Design Influence the Accuracy of Patient Specific Instrumentation in Total Knee Arthroplasty? , 2015, The Journal of arthroplasty.
[204] Ludomir Stefańczyk,et al. Clinical application of 3D pre-bent titanium implants for orbital floor fractures. , 2009, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[205] Nitin Goyal,et al. Clinical, functional, and radiographic outcomes following total knee arthroplasty with patient-specific instrumentation, computer-assisted surgery, and manual instrumentation: a short-term follow-up study , 2014, International Journal of Computer Assisted Radiology and Surgery.
[206] Lai Gui,et al. Application of Computer Techniques in Repair of Oblique Facial Clefts With Outer-Table Calvarial Bone Grafts , 2013, The Journal of craniofacial surgery.
[207] Majeed Rana,et al. Evaluation of computer‐assisted jaw reconstruction with free vascularized fibular flap compared to conventional surgery: a clinical pilot study , 2012, The international journal of medical robotics + computer assisted surgery : MRCAS.
[208] M. Schotanus,et al. Accuracy of CT-based patient-specific guides for total knee arthroplasty in patients with post-traumatic osteoarthritis , 2015, European Journal of Orthopaedic Surgery & Traumatology.
[209] Euiseong Kim,et al. Minimizing the extra-oral time in autogeneous tooth transplantation: use of computer-aided rapid prototyping (CARP) as a duplicate model tooth , 2012, Restorative dentistry & endodontics.
[210] Alexander Schramm,et al. Mandible reconstruction using patient-specific pre-bent reconstruction plates: comparison of standard and transfer key methods , 2015, International Journal of Computer Assisted Radiology and Surgery.
[211] Carsten Perka,et al. Small Improvements in Mechanical Axis Alignment Achieved With MRI versus CT-based Patient-specific Instruments in TKA: A Randomized Clinical Trial , 2014, Clinical orthopaedics and related research.
[212] Nishma Patel,et al. Single stage treatment of ankylosis of the temporomandibular joint using patient-specific total joint replacement and virtual surgical planning. , 2014, The British journal of oral & maxillofacial surgery.
[213] Wei Tang,et al. Individual design and rapid prototyping in reconstruction of orbital wall defects. , 2010, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[214] Andrzej Urbanik,et al. Cranioplasty prosthesis manufacturing based on reverse engineering technology , 2012, Medical science monitor : international medical journal of experimental and clinical research.
[215] Wang Zhiyong,et al. Combined Use of an Anterolateral Thigh Flap and Rapid Prototype Modeling to Reconstruct Maxillary Oncologic Resections and Midface Defects , 2014, The Journal of craniofacial surgery.
[216] Min Li,et al. The Application of Rapid Prototyping Technique in Chin Augmentation , 2009, Aesthetic Plastic Surgery.
[217] M. Mavili,et al. Use of Three-Dimensional Medical Modeling Methods for Precise Planning of Orthognathic Surgery , 2007, The Journal of craniofacial surgery.
[218] Junqiang Wang,et al. Printed Three-dimensional Anatomic Templates for Virtual Preoperative Planning Before Reconstruction of Old Pelvic Injuries: Initial Results , 2015, Chinese medical journal.
[219] Jong Woo Choi,et al. Mirror-Imaged Rapid Prototype Skull Model and Pre-Molded Synthetic Scaffold to Achieve Optimal Orbital Cavity Reconstruction. , 2015, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.
[220] Kai Zhang,et al. Clinical Application of Computer-aided Design-Rapid Prototyping in C1–C2 Operation Techniques for Complex Atlantoaxial Instability , 2014, Journal of spinal disorders & techniques.
[221] Yue Ding,et al. Application of Rapid Prototyping Pelvic Model for Patients with DDH to Facilitate Arthroplasty Planning: A Pilot Study. , 2015, The Journal of arthroplasty.
[222] Randy E. Ellis,et al. Hip resurfacing with individualized drill templates—comparison between anterolateral and posterior approach , 2012 .
[223] J. Guarino,et al. Rapid Prototyping Technology for Surgeries of the Pediatric Spine and Pelvis: Benefits Analysis , 2007, Journal of pediatric orthopedics.
[224] Michael Luo,et al. Component sizing in total knee arthroplasty: patient-specific guides vs. computer-assisted navigation , 2012, Biomedizinische Technik. Biomedical engineering.
[225] I. Harris,et al. Total knee arthroplasty using patient-specific guides: Is there a learning curve? , 2015, The Knee.
[226] Manabu Kanazawa,et al. Face simulation system for complete dentures by applying rapid prototyping. , 2013, The Journal of prosthetic dentistry.
[227] William S Pietrzak,et al. Patient-specific positioning guides versus manual instrumentation for total knee arthroplasty: an intraoperative comparison. , 2014, Journal of surgical orthopaedic advances.
[228] Florian Probst,et al. Multicenter study on the use of patient-specific CAD/CAM reconstruction plates for mandibular reconstruction , 2015, International Journal of Computer Assisted Radiology and Surgery.
[229] H. H. Malik,et al. Three-dimensional printing in surgery: a review of current surgical applications. , 2015, The Journal of surgical research.
[230] K. Hagio,et al. Tailor‐made surgical guide based on rapid prototyping technique for cup insertion in total hip arthroplasty , 2009, The international journal of medical robotics + computer assisted surgery : MRCAS.
[231] Joanne B. Adams,et al. MRI is more accurate than CT for patient-specific total knee arthroplasty. , 2015, The Knee.
[232] P. D'urso,et al. Stereolithographic biomodelling in cranio-maxillofacial surgery: a prospective trial. , 1999, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.