Progress and challenges towards additive manufacturing of SiC ceramic

[1]  P. Colombo,et al.  X-ray microtomography investigations on the residual pore structure in silicon nitride bars manufactured by direct ink writing using different printing patterns , 2020 .

[2]  D. Fang,et al.  Stereolithography additive manufacturing of multi-ceramic triangle structures with tunable thermal expansion , 2020 .

[3]  Q. Zeng,et al.  Influence of debinding holding time on mechanical properties of 3D-printed alumina ceramic cores , 2020 .

[4]  J. Zou,et al.  Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs – a review , 2019, International Materials Reviews.

[5]  T. Zeng,et al.  3D printing of porous SiC ceramics added with SiO2 hollow microspheres , 2020 .

[6]  E. Rezaei,et al.  Cellular ceramic architectures produced by hybrid additive manufacturing: a review on the evolution of their design , 2020, Journal of the Ceramic Society of Japan.

[7]  Xiaodong Wang,et al.  Study of pore defect and mechanical properties in selective laser melted Ti6Al4V alloy based on X-ray computed tomography , 2020 .

[8]  Zhe Zhao,et al.  Mechanical properties of zirconia octet truss structures fabricated by DLP 3D printing , 2020, Materials Research Express.

[9]  R. He,et al.  Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror , 2020 .

[10]  Yong Yang,et al.  Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics , 2020 .

[11]  J. Qiu,et al.  3D printing of glass by additive manufacturing techniques: a review , 2020, Frontiers of Optoelectronics.

[12]  T. Chartier,et al.  Synthesis and properties of macroporous SiC ceramics synthesized by 3D printing and chemical vapor infiltration/deposition , 2020, Journal of the European Ceramic Society.

[13]  J. Chevalier,et al.  X-ray tomography of additive-manufactured zirconia: Processing defects – Strength relations , 2020 .

[14]  Qing Huang,et al.  Preparation and stereolithography of SiC ceramic precursor with high photosensitivity and ceramic yield , 2020 .

[15]  R. He,et al.  Additive manufacturing of hydroxyapatite bioceramic scaffolds: Dispersion, digital light processing, sintering, mechanical properties, and biocompatibility , 2020, Journal of Advanced Ceramics.

[16]  H. Gu,et al.  Hybrid ultrasonic and mini-motor vibration-induced irregularly shaped powder delivery for multiple materials additive manufacturing , 2020 .

[17]  S. Dong,et al.  Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior , 2020, Journal of Advanced Ceramics.

[18]  S. Dong,et al.  High strength aligned SiC nanowire reinforced SiC porous ceramics fabricated by 3D printing and chemical vapor infiltration , 2020 .

[19]  K. Zhou,et al.  3D-SiC decorated with SiC whiskers: Chemical vapor infiltration on the porous 3D-SiC lattices derived from polycarbosilane-based suspensions , 2020 .

[20]  Q. Zeng,et al.  Effect of sintering temperature in argon atmosphere on microstructure and properties of 3D printed alumina ceramic cores , 2020, Journal of Advanced Ceramics.

[21]  Hongjie Wang,et al.  Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering , 2020, Journal of Advanced Ceramics.

[22]  E. Rezaei,et al.  Pressure Drop and Convective Heat Transfer in Different SiSiC Structures Fabricated by Indirect Additive Manufacturing , 2020 .

[23]  T. Zeng,et al.  High‐temperature flexural strength of SiC ceramics prepared by additive manufacturing , 2020 .

[24]  D. Fang,et al.  Dispersion and stability of SiC ceramic slurry for stereolithography , 2020 .

[25]  M. Belmonte,et al.  The effect of rod orientation on the strength of highly porous filament printed 3D SiC ceramic architectures , 2020 .

[26]  D. Fang,et al.  Digital light processing of 3Y-TZP strengthened ZrO2 ceramics , 2020 .

[27]  Xing‐dong Zhang,et al.  Stereolithography-Based Additive Manufacturing of High-Performance Osteoinductive Calcium Phosphate Ceramics by a Digital Light-Processing System. , 2020, ACS biomaterials science & engineering.

[28]  E. Saiz,et al.  Conformable green bodies: Plastic forming of robocasted advanced ceramics , 2020 .

[29]  A. Seyam,et al.  A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties , 2020 .

[30]  Fengqi Liu,et al.  A review of third generation SiC fibers and SiCf/SiC composites , 2019 .

[31]  Yazheng Yang,et al.  Stereolithography‐based additive manufacturing of gray‐colored SiC ceramic green body , 2019, Journal of the American Ceramic Society.

[32]  P. Colombo,et al.  Multiscale ceramic components from preceramic polymers by hybridization of vat polymerization-based technologies , 2019 .

[33]  Jonas Biggemann,et al.  Robocasting of reaction bonded silicon carbide structures , 2019 .

[34]  Zhe Zhao,et al.  Bending Strength of 3D-Printed Zirconia Ceramic Cellular Structures , 2019, IOP Conference Series: Materials Science and Engineering.

[35]  K. Zhou,et al.  3D SiC containing uniformly dispersed, aligned SiC whiskers: Printability, microstructure and mechanical properties , 2019, Journal of Alloys and Compounds.

[36]  E. Saiz,et al.  High temperature strength of an ultra high temperature ceramic produced by additive manufacturing , 2019, Ceramics International.

[37]  V. Popov,et al.  Reaction bonding of silicon carbides by Binder Jet 3D-Printing, phenolic resin binder impregnation and capillary liquid silicon infiltration , 2019, Ceramics International.

[38]  A. Zocca,et al.  Additive manufacturing of SiSiC by layerwise slurry deposition and binder jetting (LSD-print) , 2019, Journal of the European Ceramic Society.

[39]  Dichen Li,et al.  Microstructure control of highly oriented short carbon fibres in SiC matrix composites fabricated by direct ink writing , 2019, Ceramics International.

[40]  Chuanzhen Huang,et al.  A study on biosafety of HAP ceramic prepared by SLA-3D printing technology directly. , 2019, Journal of the mechanical behavior of biomedical materials.

[41]  Jagannadh Satyavolu,et al.  Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects , 2019, Composites Part B: Engineering.

[42]  G. Sorarù,et al.  Polymer-derived SiOC replica of material extrusion-based 3-D printed plastics , 2019, Additive Manufacturing.

[43]  Lai-fei Cheng,et al.  Fabrication of SiC whisker-reinforced SiC ceramic matrix composites based on 3D printing and chemical vapor infiltration technology , 2019, Journal of the European Ceramic Society.

[44]  Lai-fei Cheng,et al.  Strengthening three‐dimensional printed ultra‐light ceramic lattices , 2019, Journal of the American Ceramic Society.

[45]  E. Fiume,et al.  Robocasting of SiO2-Based Bioactive Glass Scaffolds with Porosity Gradient for Bone Regeneration and Potential Load-Bearing Applications , 2019, Materials.

[46]  Y. Kogo,et al.  Carbon fiber reinforced ultra-high temperature ceramic matrix composites: A review , 2019, Ceramics International.

[47]  Xin Wang,et al.  Ultrahigh strength printed ceramic lattices , 2019, Journal of Alloys and Compounds.

[48]  D. Fang,et al.  Fabrication of SiC ceramic architectures using stereolithography combined with precursor infiltration and pyrolysis , 2019, Ceramics International.

[49]  Guang-yi Ma,et al.  3D printing of nano-scale Al2O3-ZrO2 eutectic ceramic: Principle analysis and process optimization of pores , 2019, Additive Manufacturing.

[50]  H. Yun,et al.  3D-printed monolithic SiCN ceramic microreactors from a photocurable preceramic resin for the high temperature ammonia cracking process , 2019, Reaction Chemistry & Engineering.

[51]  Narinder Singh,et al.  Recycled HDPE reinforced Al2O3 and SiC three dimensional printed patterns for sandwich composite material , 2019, Engineering Research Express.

[52]  K. Zhou,et al.  Effect of silicon addition on the microstructure, mechanical and thermal properties of Cf/SiC composite prepared via selective laser sintering , 2019, Journal of Alloys and Compounds.

[53]  S. Naghavi Alhosseini,et al.  The effect of oxide, carbide, nitride and boride additives on properties of pressureless sintered SiC: A review , 2019, Journal of the European Ceramic Society.

[54]  Xiaoji Zhang,et al.  Easy-To-Remove Composite Support Material and Procedure in Additive Manufacturing of Metallic Components Using Multiple Material Laser-Based Powder Bed Fusion , 2019, Journal of Manufacturing Science and Engineering.

[55]  Lai-fei Cheng,et al.  3D printed SiC nanowire reinforced composites for broadband electromagnetic absorption , 2019, Ceramics International.

[56]  P. Colombo,et al.  Additive Manufacturing of ceramic components by Digital Light Processing: A comparison between the “bottom-up” and the “top-down” approaches , 2019, Journal of the European Ceramic Society.

[57]  Ismail Fidan,et al.  The trends and challenges of fiber reinforced additive manufacturing , 2019, The International Journal of Advanced Manufacturing Technology.

[58]  Yong Yang,et al.  The preparation of SiC-based ceramics by one novel strategy combined 3D printing technology and liquid silicon infiltration process , 2019, Ceramics International.

[59]  Dichen Li,et al.  Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing , 2019, Scripta Materialia.

[60]  A. Gurlo,et al.  Additive manufacturing of ceramics from preceramic polymers: A versatile stereolithographic approach assisted by thiol-ene click chemistry , 2019, Additive Manufacturing.

[61]  Dichen Li,et al.  Research progress of ceramic matrix composite parts based on additive manufacturing technology , 2019, Virtual and Physical Prototyping.

[62]  Xu-hao Han,et al.  Ballistic reliability study on SiC/UHMWPE composite armor against armor-piercing bullet , 2019, Composite Structures.

[63]  Li Yang,et al.  3D printing of ceramics: A review , 2019, Journal of the European Ceramic Society.

[64]  P. Miranzo,et al.  Highly-porous hierarchical SiC structures obtained by filament printing and partial sintering , 2019, Journal of the European Ceramic Society.

[65]  Tao Peng,et al.  A framework for big data driven process analysis and optimization for additive manufacturing , 2019, Rapid Prototyping Journal.

[66]  Xiangzhao Zhang,et al.  Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior , 2019, Journal of Advanced Ceramics.

[67]  Y. Ohta,et al.  Additive Manufacturing of SiC Ceramics with Complicated Shapes Using the FDM Type 3D-Printer , 2019, Journal of Materials Science and Chemical Engineering.

[68]  J. Kuebler,et al.  Maskless lithography of silazanes for fabrication of ceramic micro-components , 2019, Ceramics International.

[69]  J. Middendorf,et al.  Selective laser melting for the preparation of an ultra-high temperature ceramic coating , 2019, Ceramics International.

[70]  Steven Y. Liang,et al.  High-speed grinding of HIP-SiC ceramics on transformation of microscopic features , 2019, The International Journal of Advanced Manufacturing Technology.

[71]  S. Son,et al.  Additive Manufacturing of Carbon Fiber Reinforced Silicon Carbide Solid Rocket Nozzles , 2019, AIAA Scitech 2019 Forum.

[72]  Wanli,et al.  Design of a Shaping System for Stereolithography with High Solid Loading Ceramic Suspensions , 2018 .

[73]  D. Bourell,et al.  Laser additive manufacturing and homogeneous densification of complicated shape SiC ceramic parts , 2018, Ceramics International.

[74]  U. Lafont,et al.  Additive manufacturing — A review of 4D printing and future applications , 2018, Additive Manufacturing.

[75]  K. Zhou,et al.  3D printing of SiC ceramic: Direct ink writing with a solution of preceramic polymers , 2018, Journal of the European Ceramic Society.

[76]  Zhi-Gang Lu,et al.  Design of a Shaping System for Stereolithography with High Solid Loading Ceramic Suspensions , 2018, 3D Printing and Additive Manufacturing.

[77]  J. Kruth,et al.  Direct laser sintering of reaction bonded silicon carbide with low residual silicon content , 2018, Journal of the European Ceramic Society.

[78]  Jian Lu,et al.  Origami and 4D printing of elastomer-derived ceramic structures , 2018, Science Advances.

[79]  P. Greil,et al.  Sol-gel infiltration of complex cellular indirect 3D printed alumina , 2018, Journal of the European Ceramic Society.

[80]  P. Colombo,et al.  Polymer‐derived SiCN cellular structures from replica of 3D printed lattices , 2018 .

[81]  Qifa Zhou,et al.  Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures , 2018, Advanced materials.

[82]  G. Jiang,et al.  SiC reticulated porous ceramics by 3D printing, gelcasting and liquid drying , 2018 .

[83]  Hongyu Xing,et al.  Study on surface quality, precision and mechanical properties of 3D printed ZrO2 ceramic components by laser scanning stereolithography , 2017 .

[84]  Y. D. Hazan,et al.  SiC and SiOC ceramic articles produced by stereolithography of acrylate modified polycarbosilane systems , 2017 .

[85]  M. Scheffler,et al.  Reticulated Replica Ceramic Foams: Processing, Functionalization, and Characterization , 2017 .

[86]  Wei Zhang,et al.  Building digital twins of 3D printing machines , 2017 .

[87]  V. Tikare,et al.  Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo , 2017 .

[88]  Hong Liu,et al.  Effects of SiC whiskers on the mechanical properties and microstructure of SiC ceramics by reactive sintering , 2017 .

[89]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[90]  John W. Halloran,et al.  Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization , 2016 .

[91]  Moataz M. Attallah,et al.  Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants. , 2016, Materials science & engineering. C, Materials for biological applications.

[92]  Yaoyao Fiona Zhao,et al.  A survey of the design methods for additive manufacturing to improve functional performance , 2016 .

[93]  Z. Eckel,et al.  Additive manufacturing of polymer-derived ceramics , 2016, Science.

[94]  R. Shepherd,et al.  Direct Ink Writing of Silicon Carbide for Microwave Optics , 2016 .

[95]  Singh Mrityunjay,et al.  Additive Manufacturing of Silicon Carbide‐Based Ceramics By 3‐D Printing Technologies , 2015 .

[96]  Xiaowei Yin,et al.  Absorption properties of twinned SiC nanowires reinforced Si3N4 composites fabricated by 3d-prining , 2015 .

[97]  A. Merati,et al.  Instrumented and Vickers Indentation for the Characterization of Stiffness, Hardness and Toughness of Zirconia Toughened Al2O3 and SiC Armor , 2015 .

[98]  Alberto Ortona,et al.  Carbon periodic cellular architectures , 2015 .

[99]  Yaoyao Fiona Zhao,et al.  Additive manufacturing-enabled design theory and methodology: a critical review , 2015 .

[100]  P. Fino,et al.  SiSiC Heat Exchangers for Recuperative Gas Burners with Highly Structured Surface Elements , 2014 .

[101]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[102]  Jung-Hye Eom,et al.  Processing and properties of macroporous silicon carbide ceramics: A review , 2013 .

[103]  E. Bernardo,et al.  SiOC ceramics with ordered porosity by 3D-printing of a preceramic polymer , 2013 .

[104]  M. Belmonte,et al.  Geometrically Complex Silicon Carbide Structures Fabricated by Robocasting , 2012 .

[105]  A. Ortona,et al.  Cellular ceramics produced by rapid prototyping and replication , 2012 .

[106]  Hermann Seitz,et al.  Ceramic scaffolds produced by computer-assisted 3D printing and sintering: characterization and biocompatibility investigations. , 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

[107]  Dong-Yol Yang,et al.  Fabrication of three-dimensional SiC ceramic microstructures with near-zero shrinkage via dual crosslinking induced stereolithography. , 2009, Chemical communications.

[108]  Peter Greil,et al.  Preceramic Paper‐Derived Ceramics , 2008 .

[109]  Robby Ebert,et al.  Laser micro sintering: A new method to generate metal and ceramic parts of high resolution with sub-micrometer powder , 2008 .

[110]  P. Greil,et al.  Laminated Object Manufacturing of Preceramic‐Paper‐Derived Si?SiC Composites , 2007 .

[111]  Peter Greil,et al.  Fabrication of Al2O3-based composites by indirect 3D-printing , 2006 .

[112]  David L. Bourell,et al.  Rapid manufacturing of silicon carbide composites , 2005 .

[113]  J. Lewis.  Colloidal Processing of Ceramics , 2004 .

[114]  Bingqing Wei,et al.  Processing and properties of carbon nanotubes–nano-SiC ceramic , 1998 .

[115]  David L. Bourell,et al.  Selective Laser Sintering of Polymer-Coated Silicon Carbide Powders , 1995 .

[116]  Lei Wang,et al.  Performance optimization of complicated structural SiC/Si composite ceramics prepared by selective laser sintering , 2020 .

[117]  Bin Zou,et al.  The preparation of ZrO2-Al2O3 composite ceramic by SLA-3D printing and sintering processing , 2020 .

[118]  S. Ozcan,et al.  Additively manufactured carbon fiber-reinforced composites: State of the art and perspective , 2020, Additive Manufacturing.

[119]  A. Clare,et al.  Laser powder bed fusion of a Magnesium-SiC metal matrix composite , 2019, Procedia CIRP.

[120]  G. Wang,et al.  High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing , 2019, Ceramics International.

[121]  Huajun Sun,et al.  Fabrication of complicated silicon carbide ceramic components using combined 3D printing with gelcasting , 2018 .

[122]  H. Seitz,et al.  D Printing of Porous Al 2 O 3 and SiC ceramics , 2015 .

[123]  Zheng-ren Huang,et al.  Properties of silicon carbide ceramics from gelcasting and pressureless sintering , 2015 .

[124]  M. Scheffler,et al.  Fabrication of polymer derived ceramic parts by selective laser curing , 2005 .

[125]  P H Krebsbach,et al.  Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds. , 2003, Biomaterials.

[126]  Akira Kohyama,et al.  Preparation of SiC/SiC Composites by Hot Pressing, Using Tyranno-SA Fiber as Reinforcement , 2003 .

[127]  C. Scott,et al.  Processing of porous ceramics , 1992 .