A MPPT approach based on temperature measurements applied in PV systems

This paper presents a temperature-based Maximum Power Point Tracker (MPPT) algorithm applied to photovoltaic (PV) systems. The proposed MPPT method (MPPT-temp) employs a LM35 temperature sensor in order to obtain a sample of the photovoltaic module surface temperature and, from it, calculate the optimal voltage to be imposed across the photovoltaic device. Unlike of the Hill Climbing methods, which employ voltage and current sensors to estimate the MPP, in the MPPT-temp the current sensor is substituted by a temperature one, implying in some advantages as cost reduction, accomplishment of the MPP even during sudden environmental (radiation and/or temperature) variations and no oscillations around the MPP in steady state. Theoretical, simulation and experimental results are presented in order to validate the concepts.

[1]  E.D. Aranda,et al.  Measuring the I-V curve of PV generators , 2009, IEEE Industrial Electronics Magazine.

[2]  N. Dasgupta,et al.  Design Issues in Implementing MPPT for Improved Tracking and Dynamic Performance , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[3]  Chee Wei Tan,et al.  Analysis of perturb and observe maximum power point tracking algorithm for photovoltaic applications , 2008, 2008 IEEE 2nd International Power and Energy Conference.

[4]  Roberto F. Coelho,et al.  A proposed photovoltaic module and array mathematical modeling destined to simulation , 2009, 2009 IEEE International Symposium on Industrial Electronics.

[5]  Minwon Park,et al.  A study on the optimal voltage for MPPT obtained by surface temperature of solar cell , 2004, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004.

[6]  S. Yuvarajan,et al.  A fast and accurate maximum power point tracker for PV systems , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[7]  Mike Ropp,et al.  Comparative study of maximum power point tracking algorithms using an experimental, programmable, maximum power point tracking test bed , 2000, Conference Record of the Twenty-Eighth IEEE Photovoltaic Specialists Conference - 2000 (Cat. No.00CH37036).

[8]  B. Lehman,et al.  Study of Different Implementation Approaches for a Maximum Power Point Tracker , 2006, 2006 IEEE Workshops on Computers in Power Electronics.

[9]  Roberto F. Coelho,et al.  A study of the basic DC-DC converters applied in maximum power point tracking , 2009, 2009 Brazilian Power Electronics Conference.

[10]  Toshihiko Noguchi,et al.  Short-current pulse based adaptive maximum-power-point tracking for photovoltaic power generation system , 2000, ISIE'2000. Proceedings of the 2000 IEEE International Symposium on Industrial Electronics (Cat. No.00TH8543).

[11]  M. Vitelli,et al.  Optimizing sampling rate of P&O MPPT technique , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[12]  N. Mutoh,et al.  Prediction-data-based maximum-power-point-tracking method for photovoltaic power generation systems , 2002, 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289).