Implementation of redundancy control by degrading voltage level in modular multilevel converter

Modular Multilevel Converter (MMC) normally employs large number of sub-modules which increase the redundancy property of an MMC. This paper proposes a simple redundancy control to improve the reliability of an MMC. When power switches failures are identified, the proposed redundancy controller will automatically degrade the output voltage level. The proposed redundancy controller is fully described and validated experimentally. A small scale MMC prototype is used in this experiment. Capacitor voltage balancing control and Level-Shifted Pulse Width Modulation strategies will be implemented. Test results are presented to verify the feasibility of the proposed redundancy controller.

[1]  Alex Q. Huang,et al.  Fault-Tolerant Design and Control Strategy for Cascaded H-Bridge Multilevel Converter-Based STATCOM , 2010, IEEE Transactions on Industrial Electronics.

[2]  Hirofumi Akagi.  Classification, Terminology, and Application of the Modular Multilevel Cascade Converter (MMCC) , 2011 .

[3]  Samir Kouro,et al.  Circuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters , 2015, IEEE Transactions on Power Electronics.

[4]  M. Glinka,et al.  Prototype of multiphase modular-multilevel-converter with 2 MW power rating and 17-level-output-voltage , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[5]  Xiguo Gong.  A 3.3kV IGBT module and application in modular multilevel converter for HVDC , 2012, 2012 IEEE International Symposium on Industrial Electronics.

[6]  R. Marquardt,et al.  Modular Multilevel Converter: An universal concept for HVDC-Networks and extended DC-Bus-applications , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[7]  Hossein Iman-Eini,et al.  A Redundancy-based scheme for balancing DC-link voltages in cascaded H-bridge rectifiers , 2013 .

[8]  Rainer Marquardt,et al.  An innovative modular multilevel converter topology suitable for a wide power range , 2003, 2003 IEEE Bologna Power Tech Conference Proceedings,.

[9]  Marc Hiller,et al.  Modulation, Losses, and Semiconductor Requirements of Modular Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[10]  M. Ciobotaru,et al.  Effect of redundant sub-module utilization on modular multilevel converters , 2012, 2012 IEEE International Conference on Industrial Technology.

[11]  Leon M. Tolbert,et al.  A New Selective Loop Bias Mapping Phase Disposition PWM With Dynamic Voltage Balance Capability for Modular Multilevel Converter , 2014, IEEE Transactions on Industrial Electronics.

[12]  Dehong Xu,et al.  Survey on Fault-Tolerant Techniques for Power Electronic Converters , 2014, IEEE Transactions on Power Electronics.

[13]  Vassilios G. Agelidis,et al.  Operation of a modular multilevel converter with selective harmonic elimination PWM , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[14]  D. Retzmann,et al.  Prospects of multilevel VSC technologies for power transmission , 2008, 2008 IEEE/PES Transmission and Distribution Conference and Exposition.