A two-phase flow and transport model for the cathode of PEM fuel cells

[1]  Hongtan Liu,et al.  A parametric study of the cathode catalyst layer of PEM fuel cells using a pseudo-homogeneous model , 2001 .

[2]  Z. H. Wang,et al.  Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells , 2000 .

[3]  Sadik Kakac,et al.  Two‐dimensional model for proton exchange membrane fuel cells , 1998 .

[4]  T. Nguyen,et al.  An Along‐the‐Channel Model for Proton Exchange Membrane Fuel Cells , 1998 .

[5]  Chao-Yang Wang,et al.  A multiphase mixture model for multiphase, multicomponent transport in capillary porous media—I. Model development , 1996 .

[6]  Ralph E. White,et al.  A water and heat management model for proton-exchange-membrane fuel cells , 1993 .

[7]  T. Fuller,et al.  Water and Thermal Management in Solid‐Polymer‐Electrolyte Fuel Cells , 1993 .

[8]  Mark W. Verbrugge,et al.  A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell , 1992 .

[9]  M. Kaviany.  Principles of heat transfer in porous media , 1991 .

[10]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[11]  M. Verbrugge,et al.  Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte , 1991 .

[12]  C. L. Tien,et al.  Boundary and inertia effects on flow and heat transfer in porous media , 1981 .

[13]  M. C. Leverett,et al.  Capillary Behavior in Porous Solids , 1941 .

[14]  Lixin You,et al.  The two-phase flow, transport mechanism and performance studies for PEM fuel cells , 2001 .

[15]  George F. Pinder,et al.  A Multiphase Approach to the Modeling of Porous Media Contamination by Organic Compounds: 1. Equation Development , 1985 .