论文信息 - Development of double hinge mechanisms in a bent cantilever subjected to an out-of-plane force pulse

Development of double hinge mechanisms in a bent cantilever subjected to an out-of-plane force pulse

Abstract In a previous paper [Y. L. Hua , T. X. Yu and S. R. Reid , Double hinge modes in the dynamic response of plastic cantilever beams subjected to step loading. Int. J. Impact Engng7, 401–413 (1988)] double hinge mechanisms were shown to satisfy all the necessary equations for the initial deformation mechanism of a range of bent cantilevers subjected to an out-of-plane tip force. The present study examines the transient behaviour of such mechanisms when the cantilever is subjected to a force pulse of finite duration. The change in the mechanism as the hinges travel and the partitioning of the dissipation of the input energy are described and compared with the behaviour of a straight cantilever subjected to a force pulse at its tip.

Stephen R Reid | Y. L. Hua | J. L. Yang | S. Reid | Y. Hua

[1] E. W. Parkes,et al. The permanent deformation of a cantilever struck transversely at its tip , 1955, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[2] S. Reid. The mechanics of pipe whip. , 1989 .

[3] Tongxi Yu,et al. Double-hinge modes in the dynamic response of plastic cantilever beams subjected to step loading , 1988 .

[5] Martin A. Salmon,et al. Rigid Plastic Beam Model for Pipe Whip Analysis , 1976 .

[6] W. Johnson,et al. The plastic hinge position in a bent cantilever struck normal to its plane by a steady jet applied at its tip , 1985 .

[7] Rodney Hill,et al. On the plastic distortion of solid bars by combined bending and twisting , 1953 .