A new design approach for customised medical devices realized by additive manufacturing

The aim of this work is the design of a new customised elbow orthosis completely realized by Additive Manufacturing and the development of generative algorithms for parametric modelling and creation of 3D patterns to be adapted to the CAD model. This work describes a method to perfect the design of a custom elbow orthosis. A reverse engineering approach has been used to digitalize the patient’s arm and the subsequent CAD modelling of the structure of the custom elbow orthosis has been performed. In particular, two algorithms have been implemented for the creation of 3D patterns and Voronoi tessellations. Subsequently, FEM analyses have been carried out to validate the design. Finally, a prototype of the elbow orthosis with Voronoi tessellation has been realized by means of the SLS technology. The results obtained have demonstrated that the implemented algorithm solved the problems found during CAD modelling with conventional software. Furthermore, the results of FEM analyses have validated the design choices. All this allowed realizing the prototype by AM technologies without problems. Moreover, the new proposed modelling approaches allows creating, in an interactive way, patterns on complex surfaces. The results of this research activity present innovative elements of originality in the CAD modelling sector, which can contribute to solving problems related to the modelling for Additive Manufacturing. Furthermore, another innovative characteristic of the device is the use of torsion springs that simulate the action of physiotherapists during exercises for patient rehabilitation.

[1]  Albert J. Shih,et al.  Additive manufacturing of custom orthoses and prostheses-A review , 2016 .

[2]  Christoph Klahn,et al.  Design Strategies for the Process of Additive Manufacturing , 2015 .

[3]  Harry Bikas,et al.  Additive manufacturing methods and modelling approaches: a critical review , 2015, The International Journal of Advanced Manufacturing Technology.

[5]  T Ingrassia,et al.  A new method to evaluate the influence of the glenosphere positioning on stability and range of motion of a reverse shoulder prosthesis. , 2019, Injury.

[6]  Tommaso Ingrassia,et al.  Additively manufactured textiles and parametric modelling by generative algorithms in orthopaedic applications , 2020 .

[7]  Sivam Krish,et al.  A practical generative design method , 2011, Comput. Aided Des..

[8]  Tommaso Ingrassia,et al.  Biomechanical analysis of the humeral tray positioning in reverse shoulder arthroplasty design , 2018 .

[9]  Nicolas Perry,et al.  An Exhaustive Method for Researching Articular Orthosis Mechanisms at the Conceptual Design Stage , 2017 .

[10]  Sunpreet Singh,et al.  Material issues in additive manufacturing: A review , 2017 .

[11]  Liang Hou,et al.  Additive manufacturing and its societal impact: a literature review , 2013 .

[12]  Daniel R. Eyers,et al.  Industrial Additive Manufacturing: A manufacturing systems perspective , 2017, Comput. Ind..

[13]  Tommaso Ingrassia,et al.  Thermal stress analysis of different full and ventilated disc brakes , 2015 .

[14]  Seeram Ramakrishna,et al.  Biomedical applications of additive manufacturing: Present and future , 2017 .

[15]  Massimiliano Fantini,et al.  Design and Rapid Manufacturing of a customized foot orthosis: a first methodological study , 2017 .

[16]  Qing Li,et al.  Yielding behaviors of polymeric scaffolds with implications to tissue engineering , 2016 .

[17]  Tommaso Ingrassia,et al.  Virtual prototyping of a new intramedullary nail for tibial fractures , 2013 .

[18]  B. Sridhar Babu,et al.  A Critical Review on Recent Research Methodologies in Additive Manufacturing , 2017 .

[19]  Cícero André da Costa Moraes,et al.  A digital approach for design and fabrication by rapid prototyping of orthosis for developmental dysplasia of the hip , 2016, Research on Biomedical Engineering.

[20]  T. Ingrassia,et al.  Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation , 2014 .

[21]  Abby M Paterson,et al.  Computer-aided design to support fabrication of wrist splints using 3D printing: A feasibility study , 2014 .

[22]  Jing Bai,et al.  Design pattern modeling and extraction for CAD models , 2016, Adv. Eng. Softw..

[23]  Emmanuel Francalanza,et al.  Generative design in the development of a robotic manipulator , 2018 .

[24]  Tommaso Ingrassia,et al.  Influence of the metaphysis positioning in a new reverse shoulder prosthesis , 2017 .

[25]  T. Ingrassia,et al.  Influence of sutures configuration on the strength of tendon-patch joints for rotator cuff tears treatment. , 2019, Injury.

[26]  Jean-Pierre Nadeau,et al.  An innovative design approach to develop external articular medical devices , 2017 .

[27]  Tommaso Ingrassia,et al.  Process parameters influence in additive manufacturing , 2017 .

[28]  M. Javaid,et al.  Additive manufacturing applications in medical cases: A literature based review , 2018, Alexandria Journal of Medicine.

[29]  Charlie C. L. Wang,et al.  The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..

[30]  Lars Pejryd,et al.  Re)Design for Additive Manufacturing , 2016 .

[31]  F. Martina,et al.  Design for Additive Manufacturing , 2019 .

[32]  Ahmad Eltaweel,et al.  Parametric design and daylighting: A literature review , 2017 .