Control of a multi-motor drive based on five-phase tubular PM actuators for positioning systems

This paper describes a multi-motor drive based on two five-phase tubular permanent magnet actuators for positioning systems. A proximate time-optimal positioning control scheme is presented and the behavior of the drive is assessed by means of experimental tests.

[1]  Hamid A. Toliyat,et al.  Modeling, Control, and Experimental Investigation of a Five-Phase Series-Connected Two-Motor Drive With Single Inverter Supply , 2007, IEEE Transactions on Industrial Electronics.

[2]  L. Parsa,et al.  On advantages of multi-phase machines , 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..

[3]  John E. Fletcher,et al.  Dual-Plane Vector Control of a Five-Phase Induction Machine for an Improved Flux Pattern , 2008, IEEE Transactions on Industrial Electronics.

[4]  Luca Zarri,et al.  Space Vector Modulation for Multiphase Inverters Based on a Space Partitioning Algorithm , 2009, IEEE Transactions on Industrial Electronics.

[5]  H.A. Toliyat,et al.  A novel concept of a multiphase, multimotor vector controlled drive system supplied from a single voltage source inverter , 2004, IEEE Transactions on Power Electronics.

[6]  D. Casadei,et al.  Five-phase inverter modulation strategy for high performance motor drives: analysis of the voltage limit , 2007, 2007 European Conference on Power Electronics and Applications.

[7]  H. C. Lai,et al.  Optimum design of brushless tubular linear machines , 1990 .

[8]  Emil Levi,et al.  Multiphase Electric Machines for Variable-Speed Applications , 2008, IEEE Transactions on Industrial Electronics.

[9]  Hamid A. Toliyat,et al.  Five-phase induction motor drives with DSP-based control system , 2002 .

[10]  I. Boldea.  Linear Electromagnetic Actuators and Their Control: A Review , 2004 .

[11]  Hamid A. Toliyat,et al.  Multiphase induction motor drives - : a technology status review , 2007 .

[12]  H. Toliyat,et al.  Five-phase permanent-magnet motor drives , 2005, IEEE Transactions on Industry Applications.

[13]  H.A. Toliyat,et al.  Operating principles of a novel multiphase multimotor vector-controlled drive , 2004, IEEE Transactions on Energy Conversion.

[14]  D. Howe,et al.  Design optimisation and comparison of tubular permanent magnet machine topologies , 2001 .

[15]  Luca Zarri,et al.  A multi-motor drive based on five-phase tubular PM actuators , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[16]  Luca Zarri,et al.  Integrated Electromagnetic-Thermal-Mechanical Design of Tubular Permanent Magnet Actuators , 2006 .

[17]  Alberto Tenconi,et al.  Linear Drive in Industrial Application: State of the Art and Open Problems , 2002 .

[18]  Fabrice Locment,et al.  Vectorial Approach-Based Control of a Seven-Phase Axial Flux Machine Designed for Fault Operation , 2008, IEEE Transactions on Industrial Electronics.