A structure design method for compliant parallel manipulators with actuation isolation

Abstract. Since precise linear actuators of a compliant parallel manipulator suffer from their inability to tolerate the transverse motion/load in the multi-axis motion, actuation isolation should be considered in the compliant manipulator design to eliminate the transverse motion at the point of actuation. This paper presents an effective design method for constructing compliant parallel manipulators with actuation isolation, by adding the same number of actuation legs as the number of the DOF (degree of freedom) of the original mechanism. The method is demonstrated by two design case studies, one of which is quantitatively studied by analytical modelling. The modelling results confirm possible inherent issues of the proposed structure design method such as increased primary stiffness, introduced extra parasitic motions and cross-axis coupling motions.

[1]  Xianwen Kong,et al.  A Normalization-Based Approach to the Mobility Analysis of Spatial Compliant Multi-Beam Modules , 2013 .

[2]  Feng Gao,et al.  Relationship among input-force, payload, stiffness and displacement of a 3-DOF perpendicular parallel micro-manipulator , 2010 .

[3]  Larry L. Howell,et al.  Handbook of Compliant Mechanisms: Howell/Handbook , 2013 .

[4]  Guimin Chen,et al.  Modeling Large Spatial Deflections of Slender Bisymmetric Beams in Compliant Mechanisms Using Chained Spatial-Beam Constraint Model , 2015 .

[5]  Larry L. Howell,et al.  Handbook of compliant mechanisms , 2013 .

[6]  Jonathan B. Hopkins,et al.  Synthesis of multi-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT). Part II: Practice , 2010 .

[7]  Sridhar Kota,et al.  DESIGN OF LARGE-DISPLACEMENT COMPLIANT JOINTS , 2005 .

[8]  Guangbo Hao,et al.  Determinate Design and Analytical Analysis of a Class of Symmetrical Flexure Guiding Mechanisms for Linear Actuators , 2017 .

[9]  Judy M. Vance,et al.  A Screw Theory Approach for the Conceptual Design of Flexible Joints for Compliant Mechanisms , 2009 .

[10]  Leonie Kohl,et al.  Flexures Elements Of Elastic Mechanisms , 2016 .

[11]  Shorya Awtar,et al.  Performance Tradeoffs Posed by Moving Magnet Actuators in Flexure-Based Nanopositioning , 2014, IEEE/ASME Transactions on Mechatronics.

[12]  Xianwen Kong,et al.  Type Synthesis of Parallel Mechanisms , 2010, Springer Tracts in Advanced Robotics.

[13]  Jonathan B. Hopkins,et al.  Corrigendum to Synthesis of multi-degree of freedom, parallel flexure system concepts via Freedom and Constraint Topology (FACT)—Part I: Principles , 2010 .

[14]  Jonathan B. Hopkins,et al.  SYNTHESIZING PRECISION FLEXURES THAT DECOUPLE DISPLACEMENT-BASED ACTUATORS , 2012 .

[15]  Shorya Awtar,et al.  An XYZ parallel kinematic flexure mechanism with geometrically decoupled degrees of freedom , 2011 .

[16]  Layton Carter Hale,et al.  Principles and Techniques for Designing Precision Machines , 2013 .

[17]  Shorya Awtar,et al.  Constraint-based design of parallel kinematic XY flexure mechanisms , 2007 .