Manipulability Constraint Locus for a Six Degrees of Freedom Redundant Planar Manipulator
暂无分享,去创建一个
[1] Luc Baron,et al. Constrained multi-objective trajectory planning of parallel kinematic machines , 2009 .
[2] Wisama Khalil,et al. Modeling, Identification and Control of Robots , 2003 .
[3] José António Tenreiro Machado,et al. A fractional approach for the motion planning of redundant and hyper-redundant manipulators , 2011, Signal Process..
[4] Luc Baron,et al. The self-adaptation of weights for joint-limits and singularity avoidances of functionally redundant robotic-task , 2011 .
[5] L. Baron,et al. Inverse Kinematics of Functionally-Redundant Serial Manipulators under Joint Limits and Singularity Avoidance , 2007 .
[6] Tsuneo Yoshikawa,et al. Manipulability and redundancy control of robotic mechanisms , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.
[7] Fan-Tien Cheng,et al. Study and resolution of singularities for a 7-DOF redundant manipulator , 1997, Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066).
[8] Wisama Khalil,et al. Modeling, Identification & Control of Robots , 2002 .
[9] Myung Jin Chung,et al. Performance Evaluation Of Dexterity Measures Using Measure Constraint Locus , 1992, Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems.
[10] Pradeep K. Khosla,et al. Dexterity measures for design and control of manipulators , 1991, Proceedings IROS '91:IEEE/RSJ International Workshop on Intelligent Robots and Systems '91.
[11] Pyung Hun Chang,et al. A closed-form solution for inverse kinematics of robot manipulators with redundancy , 1987, IEEE J. Robotics Autom..
[12] John Baillieul,et al. Kinematic programming alternatives for redundant manipulators , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.
[13] Nagarajan Sukavanam,et al. Neural network-based nonlinear tracking control of kinematically redundant robot manipulators , 2011, Math. Comput. Model..
[14] 吉川 恒夫,et al. Foundations of robotics : analysis and control , 1990 .
[15] Alireza Mirbagheri,et al. Design and development of an effective low-cost robotic cameraman for laparoscopic surgery: RoboLens , 2011 .
[16] Myung Jin Chung,et al. Evaluation of dexterity measures for a 3-link planar redundant manipulator using constraint locus , 1995, IEEE Trans. Robotics Autom..
[17] Antonio Bicchi,et al. On the manipulability ellipsoids of underactuated robotic hands with compliance , 2012, Robotics Auton. Syst..
[18] Mahmoud Moghavvemi,et al. Geometrical approach of planar hyper-redundant manipulators: Inverse kinematics, path planning and workspace , 2011, Simul. Model. Pract. Theory.
[19] George-Christopher Vosniakos,et al. Improving feasibility of robotic milling through robot placement optimisation , 2010 .
[20] M. Omizo,et al. Modeling , 1983, Encyclopedic Dictionary of Archaeology.
[21] Tsuneo Yoshikawa,et al. A New End-effector for On-orbit Assembly of a Large Reflector , 2006, 2006 9th International Conference on Control, Automation, Robotics and Vision.
[22] Myung Jin Chung,et al. Manipulability constraint locus for a redundant manipulator , 1991, Proceedings IROS '91:IEEE/RSJ International Workshop on Intelligent Robots and Systems '91.
[23] T. Martin McGinnity,et al. Kinematic control of a redundant manipulator using an inverse-forward adaptive scheme with a KSOM based hint generator , 2010, Robotics Auton. Syst..