Laser cleaning of printed circuit boards

Abstract Laser cleaning of printed circuit boards (PCB) has been studied in this paper. It is demonstrated that laser cleaning is a powerful tool to remove resin contaminants from printed circuit boards. A Nd:YAG laser is used as a light source for laser cleaning. The beam profile of the YAG laser is reshaped and homogenized into a square beam with uniform energy distribution in the focal plane of the focusing lens by using an optical system. The printed circuit board surfaces before and after laser cleaning were inspected by an optical microscope, analysed by X-ray photoelectron spectroscopy and monitored by an acoustic wave detection method. The cleaning threshold is about 75 mJ/cm 2 and no damage is observed below 400 mJ/cm 2 .

[1]  E. Sacher,et al.  The modeling of excimer laser particle removal from hydrophilic silicon surfaces , 2000 .

[2]  P. Leiderer,et al.  Optical field enhancement effects in laser-assisted particle removal , 2001 .

[3]  A. Tam,et al.  Efficient pulsed laser removal of 0.2 μm sized particles from a solid surface , 1991 .

[4]  B. Wolff-Rottke,et al.  Cleaning of optical surfaces by excimer laser radiation , 1996 .

[5]  Yongfeng Lu,et al.  Audible acoustic wave emission in excimer laser interaction with materials , 1996 .

[6]  T. Chong,et al.  Laser Cleaning of IC Mould and Its Real-Time Monitoring , 2000 .

[7]  J. M. Lee,et al.  Angular laser cleaning for effective removal of particles. from a solid surface , 2000 .

[8]  Costas P. Grigoropoulos,et al.  Liquid-assisted pulsed laser cleaning using near-infrared and ultraviolet radiation , 1999 .

[9]  Wing P. Leung,et al.  Noncontact monitoring of laser ablation using a miniature piezoelectric probe to detect photoacoustic pulses in air , 1992 .

[10]  Yongfeng Lu,et al.  Acoustic wave monitoring of cleaning and ablation during excimer laser interaction with copper surfaces , 1997 .

[11]  Yongfeng Lu,et al.  Laser removal of particles from magnetic head sliders , 1996 .

[12]  Yongfeng Lu,et al.  Removal of submicron particles from nickel-phosphorus surfaces by pulsed laser irradiation , 1997 .

[13]  G. Vereecke,et al.  Laser-assisted removal of particles on silicon wafers , 1999 .

[14]  H. Kheyrandish,et al.  Laser removal of oxides from a copper substrate using Q-switched Nd:YAG radiation at 1064 nm, 532 nm and 266 nm , 1998 .

[15]  S. Allen,et al.  Laser‐assisted micron scale particle removal , 1990 .