New Equivalent model and Modal Analysis of Stator Core-Winding System of Permanent Magnet Motor With Concentrated Winding

An accurate prediction of modal characteristics of motor stator is essential in order to design a low vibration motor and to operate it quietly. Scholars have done a lot of research on the modal analysis of stator core and winding. However, there are few papers for the 0th-order mode shape and frequency of the stator system. This paper aims to propose a new stator system analysis model, which can effectively analyze the 0th-order mode and improve the model calculation efficiency. Firstly, the modal of stator core and stator core-winding system were analyzed theoretically. Secondly, four stator system finite element analysis models were established. The modal analysis of the stator core and stator core-winding system were carried out using the four models. The validity and computational efficiency of the four models of the stator core and stator core-winding system were compared. A new stator system analysis model was proposed. Thirdly, the modal tests of the stator core and stator core-winding system were carried out by hammering method, and the validity of the finite element analysis model was verified. Compared with the traditional model, the newly proposed model can analyze the 0th-order mode more effectively and improve the computational efficiency.

[1]  F. Neumayer,et al.  Analytical determination of the orthotropic material behavior of stator bars in the range of the end windings and determination of the material characteristics of the orthotropic composite space brackets via experimental modal analysis and FE- calculation , 2012, 2012 XXth International Conference on Electrical Machines.

[2]  Wang Fengxiang,et al.  Vibration and Modal Analysis of Stator of Large Induction Motors , 2007 .

[3]  S. Singhal,et al.  Effect of laminated core on rotor mode shape of large high speed induction motor , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[4]  Liang Zou,et al.  Numerical and Experimental Investigations of Noise and Vibration Characteristics for a Dual-Motor Hybrid Electric Vehicle , 2019, IEEE Access.

[5]  P. Pillay,et al.  Young's modulus for laminated machine structures with particular reference to switched reluctance motor vibrations , 2004, IEEE Transactions on Industry Applications.

[6]  Shuguang Zuo,et al.  Stator FEM modeling of permanent magnet synchronous motor for electric vehicle driving based on structural vibration analysis , 2010, The 2nd International Conference on Information Science and Engineering.

[7]  Chen Yun-hu,et al.  Research on calculation method of motor lamination core vibration characteristics , 2014 .

[8]  Changsheng Zhu,et al.  Identification of laminated core and winding's physical parameters by stator's modal testings , 2014, 2014 17th International Conference on Electrical Machines and Systems (ICEMS).

[9]  Yacine Amara,et al.  Impact of Pole and Slot Combination on Vibrations and Noise of Electromagnetic Origins in Permanent Magnet Synchronous Motors , 2015, IEEE Transactions on Magnetics.

[10]  Noureddine Bouhaddi,et al.  Structural dynamics of electric machine stators: Modelling guidelines and identification of three-dimensional equivalent material properties for multi-layered orthotropic laminates , 2015 .

[11]  Joseph C. S. Lai,et al.  Noise of Polyphase Electric Motors , 2005 .

[12]  S. Mori,et al.  Effect of Coils on Natural Frequencies of Stator Cores in Small Induction Motors , 1987, IEEE Transactions on Energy Conversion.

[13]  Hui Gao,et al.  Research on Equivalent Material Properties and Modal Analysis Method of Stator System of Permanent Magnet Motor With Concentrated Winding , 2019, IEEE Access.

[14]  Fangwu Ma,et al.  Design and Optimization of IPM Motor Considering Flux Weakening Capability and Vibration for Electric Vehicle Applications , 2018 .

[15]  Pragasen Pillay,et al.  Impact of stator windings and end-bells on resonant frequencies and mode shapes of switched reluctance motors , 2002 .

[16]  Miha Pirnat,et al.  Introduction of the linear contact model in the dynamic model of laminated structure dynamics: An experimental and numerical identification , 2013 .

[17]  M. Valavi,et al.  An Investigation of Zeroth-Order Radial Magnetic Forces in Low-Speed Surface-Mounted Permanent Magnet Machines , 2016, IEEE Transactions on Magnetics.

[18]  Liang Wu,et al.  Analytical Calculation of Armature Reaction Field of the Interior Permanent Magnet Motor , 2018, Energies.

[19]  Yi Li,et al.  Accurate modelling and modal analysis of stator system in permanent magnet synchronous motor with concentrated winding for vibration prediction , 2018, IET Electric Power Applications.