Shear performance of lightweight concrete filled hollow flange cold-formed steel beams

[1]  S. Navaratnam,et al.  Flexural behaviour and design of hollow flange cold-formed steel beam filled with lightweight normal and lightweight high strength concrete , 2021, Journal of Building Engineering.

[2]  P. Gatheeshgar,et al.  Shear behaviour and design of doubly symmetric hollow flange beam with web openings , 2021 .

[3]  B. Nener,et al.  Automating the mixture design of lightweight foamed concrete using multi-objective firefly algorithm and support vector regression , 2021, Cement and Concrete Composites.

[4]  Krishanu Roy,et al.  Web crippling capacity of fastened cold-formed steel channels with edge-stiffened web holes, un-stiffened web holes and plain webs under two-flange loading , 2021 .

[5]  A. Karrech,et al.  High strength flowable lightweight concrete incorporating low C3A cement, silica fume, stalite and macro-polyfelin polymer fibres , 2021 .

[6]  Ahmed W. Al Zand,et al.  Performance of the novel C-purlin tubular beams filled with recycled-lightweight concrete strengthened with CFRP sheet , 2021 .

[7]  Shiping Li,et al.  Flexural behavior of precast, prestressed, lightweight aggregate concrete-conventional concrete composite beams , 2021 .

[8]  Hong-ping Zhu,et al.  Numerical study and strength model of concrete-filled high-strength tubular flange beam under mid-span load , 2021 .

[9]  Z. Kammoun,et al.  Mechanical properties and impact resistance of a high-strength lightweight concrete incorporating prickly pear fibres , 2020 .

[10]  A. Abou-Rayan,et al.  Experimental investigation on the flexural behavior of steel cold-formed I-beam with strengthened hollow tubular flanges , 2020 .

[11]  C. Chen,et al.  Prediction of flexural and shear yielding strength of short span I-girders with concrete-filled tubular flanges and corrugated web - I: Experimental test , 2020 .

[12]  C. Chen,et al.  Prediction of flexural and shear yielding strength of short span I-girders with concrete-filled tubular flanges and corrugated web - II: Numerical simulation and theoretical analysis , 2020 .

[13]  J. Thamboo,et al.  Experimental and numerical assessment of the flexural behaviour of semi-precast-reinforced concrete slabs , 2020 .

[14]  Weijie Li,et al.  Axial behavior of slender RC square columns strengthened with circular steel tube and sandwiched concrete jackets , 2019, Engineering Structures.

[15]  L. Gardner,et al.  The continuous strength method for the design of cold-formed steel non-slender tubular cross-sections , 2018, Engineering Structures.

[16]  M. T. Gögüs,et al.  Flexural behavior of lightweight concrete and self-compacting concrete-filled steel tube beams , 2018, Journal of Constructional Steel Research.

[17]  A. Allahverdi,et al.  Development of multi-strength grade green lightweight reactive powder concrete using expanded polystyrene beads , 2018 .

[18]  Poologanathan Keerthan,et al.  Lateral distortional buckling of rivet fastened rectangular hollow flange channel beams , 2018 .

[19]  J. Liew,et al.  Mechanical properties and microstructure of ultra-lightweight cement composites with fly ash cenospheres after exposure to high temperatures , 2018 .

[20]  P. Dinakar,et al.  Mix design and properties of fly ash waste lightweight aggregates in structural lightweight concrete , 2017 .

[21]  Shazim Ali Memon,et al.  FE modelling of the flexural behaviour of square and rectangular steel tubes filled with normal and high strength concrete , 2017 .

[22]  J. Y. Richard Liew,et al.  Steel-concrete-steel sandwich composite structures subjected to extreme loads , 2016 .

[23]  X. Qian,et al.  Applications of ultra-lightweight cement composite in flat slabs and double skin composite structures , 2016 .

[24]  Mostafa Fahmi Hassanein,et al.  Fundamental behaviour of concrete-filled pentagonal flange plate girders under shear , 2015 .

[25]  Paulo J.M. Monteiro,et al.  Development of ultra-lightweight cement composites with low thermal conductivity and high specific strength for energy efficient buildings , 2015 .

[26]  Mahen Mahendran,et al.  Improved shear design rules of cold-formed steel beams , 2015 .

[27]  Togay Ozbakkaloglu,et al.  Stress–strain model for normal- and light-weight concretes under uniaxial and triaxial compression , 2014 .

[28]  Hong-ping Zhu,et al.  Experimental investigation on flexural behavior of concrete-filled pentagonal flange beam under concentrated loading , 2014 .

[29]  Mahen Mahendran,et al.  Numerical studies and design of hollow flange channel beams subject to combined bending and shear actions , 2014 .

[30]  Barbara Rossi,et al.  Strength enhancements in cold-formed structural sections - Part I: Material testing , 2013 .

[31]  Weiliang Jin,et al.  Experimental investigation and design of thin-walled concrete-filled steel tubes subject to bending , 2013 .

[32]  Poologanathan Keerthan,et al.  New Design Rules for the Shear Strength of LiteSteel Beams with Web Openings , 2013 .

[33]  Gregory J. Hancock,et al.  Direct Strength Design of Cold-Formed C-Sections for Shear and Combined Actions , 2012 .

[34]  Wei Li,et al.  Behaviour of inclined, tapered and STS square CFST stub columns subjected to axial load , 2012 .

[35]  Mahen Mahendran,et al.  Numerical Modelling of LiteSteel Beams Subject to Shear , 2011 .

[36]  Brian Uy,et al.  Nonlinear analysis of concrete-filled square stainless steel stub columns under axial compression , 2011 .

[37]  Leroy Gardner,et al.  Fire behaviour of concrete filled elliptical steel columns , 2011 .

[38]  Mahen Mahendran,et al.  Experimental studies on the shear behaviour and strength of LiteSteel Beams , 2010 .

[39]  Mahen Mahendran,et al.  Elastic shear buckling characteristics of LiteSteel Beams , 2010 .

[40]  Martin Macdonald,et al.  Recent developments in the design of cold-formed steel members and structures , 2008 .

[41]  K. Poologanathan,et al.  Numerical simulation and design of stainless steel hollow flange beams under shear , 2021 .

[42]  Yingwu Zhou,et al.  Feasibility of incorporating recycled fine aggregate in high performance green lightweight engineered cementitious composites , 2021 .

[43]  Hong-ping Zhu,et al.  Lateral-torsional buckling behaviour of concrete-filled high-strength steel tubular flange beams under mid-span load , 2021 .

[44]  O. Montedo,et al.  Lightweight high-strength concrete with the use of waste cenosphere as fine aggregate , 2019, Matéria (Rio de Janeiro).

[45]  Yongbo Shao,et al.  Experimental study on static behavior of I-girder with concrete-filled rectangular flange and corrugated web under concentrated load at mid-span , 2017 .

[46]  Lin-Hai Han,et al.  Performance of concrete-filled thin-walled steel tubes under pure torsion , 2007 .