Thermal characterization of full-scale PCM products and numerical simulations, including hysteresis, to evaluate energy impacts in an envelope application

Abstract This article presents combined measurements of fatty acid-based organic PCM products and numerical simulations to evaluate the energy benefits of adding a PCM layer to an exterior wall. The thermal storage characteristics of the PCM were measured using a heat flow meter apparatus (HFMA). The PCM characterization is based on a recent ASTM International standard test method, ASTM C1784 . The PCM samples were subjected to step changes in temperature and allowed to stabilize at each temperature. By measuring the heat absorbed or released by the PCM, the temperature-dependent enthalpy functions for melting and freezing were determined. The simulations were done using a previously-validated two-dimensional (2D) wall model containing a PCM layer and incorporating the HFMA-measured enthalpy functions. The wall model was modified to include the hysteresis phenomenon observed in PCMs, which is reflected in different melting and freezing temperatures of the PCM. Simulations were done with a single enthalpy curve based on the PCM melting tests, both melting and freezing enthalpy curves, and with different degrees of hysteresis between the melting and freezing curves. Significant differences were observed between the thermal performances of the modeled wall with the PCM layer under the different scenarios.

[1]  Yusuf Ali Kara,et al.  Diurnal performance analysis of phase change material walls , 2016 .

[2]  Stéphane Citherlet,et al.  Numerical model and experimental validation of heat storage with phase change materials , 2007 .

[3]  Kaushik Biswas,et al.  Field thermal performance of naturally ventilated solar roof with PCM heat sink , 2012 .

[4]  Romeu Vicente,et al.  Brick masonry walls with PCM macrocapsules: An experimental approach , 2014 .

[5]  L. Cabeza,et al.  Determination of enthalpy?temperature curves of phase change materials with the temperature-history method: improvement to temperature dependent properties , 2003 .

[6]  Sheikh Ahmad Zaki,et al.  A review on phase change material (PCM) for sustainable passive cooling in building envelopes , 2016 .

[7]  S. Medved,et al.  Influence of accuracy of thermal property data of a phase change material on the result of a numerical model of a packed bed latent heat storage with spheres , 2005 .

[8]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[9]  Michaël Kummert,et al.  Assessment of T-History Method Variants to Obtain Enthalpy–Temperature Curves for Phase Change Materials With Significant Subcooling , 2015 .

[10]  Farah Souayfane,et al.  Phase change materials (PCM) for cooling applications in buildings: A review , 2016 .

[11]  Luisa F. Cabeza,et al.  Determination of the enthalpy of PCM as a function of temperature using a heat‐flux DSC—A study of different measurement procedures and their accuracy , 2008 .

[12]  Som S Shrestha,et al.  Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard , 2014 .

[13]  Innovative Phase Change Material (PCM) for Heat Storage for Industrial Applications , 2014 .

[14]  Youngjin Choi,et al.  Application of shape-stabilized phase-change material sheets as thermal energy storage to reduce heating load in Japanese climate , 2017 .

[15]  J. Kośny,et al.  DHFMA Method for Dynamic Thermal Property Measurement of PCM-integrated Building Materials , 2015 .

[16]  Harald Mehling,et al.  Enthalpy of Phase Change Materials as a Function of Temperature: Required Accuracy and Suitable Measurement Methods , 2009 .

[17]  Michaël Kummert,et al.  Development and numerical validation of a new model for walls with phase change materials implemented in TRNSYS , 2017 .

[18]  Zhiqiang Zhai,et al.  Modeling phase change materials embedded in building enclosure: A review , 2013 .

[19]  Manuel Carmona,et al.  Reducing heat loss through the building envelope by using polyurethane foams containing thermoregulating microcapsules , 2016 .

[20]  Xin Wang,et al.  An assessment of mixed type PCM-gypsum and shape-stabilized PCM plates in a building for passive solar heating , 2007 .

[21]  Kaushik Biswas,et al.  Low-cost phase change material as an energy storage medium in building envelopes: Experimental and numerical analyses , 2014 .

[22]  Francesco Devia,et al.  Numerical and experimental investigation of an insulation layer with phase change materials (PCMs) , 2017 .

[23]  K. A. Antonopoulos,et al.  Improvements to the measurement of the thermal properties of phase change materials , 2010 .

[24]  Zhang Yinping,et al.  A simple method, the -history method, of determining the heat of fusion, specific heat and thermal conductivity of phase-change materials , 1999 .

[25]  L. Cabeza,et al.  Review of the T-history method to determine thermophysical properties of phase change materials (PCM) , 2013 .

[26]  Savvas A. Tassou,et al.  Effectiveness of CFD simulation for the performance prediction of phase change building boards in the thermal environment control of indoor spaces , 2013 .

[27]  Joseph Virgone,et al.  Experimental investigation of wallboard containing phase change material: Data for validation of numerical modeling , 2009 .

[28]  John Rekstad,et al.  Supercooling salt hydrates: Stored enthalpy as a function of temperature , 2006 .

[29]  D. Feldman,et al.  Absorption of phase change materials in concrete , 1992 .