论文信息 - Oceanographic Sensor for in-situ temperature and conductivity monitoring

Oceanographic Sensor for in-situ temperature and conductivity monitoring

The design and micro-fabrication of a new combined temperature and conductivity sensor is presented. The temperature sensor is based on a thermistor and the conductivity sensor uses two planar electrodes built on a PCB board. Tests show the temperature sensor is accurate to 0.003degC and the conductivity sensor has an error within 2.7% for KCI concentration range of 0.2-1 Mol/L.

[1] R. G. Jones. Measurements of the electrical conductivity of water , 2002 .

[2] Sascha K. Hooker,et al. Salinity sensors on seals: use of marine predators to carry CTD data loggers , 2003 .

[3] R.A. Petitt,et al. A fast response, stable CTD for gliders and AUVs , 2006, OCEANS 2006.

[4] M. Whitfield,et al. Marine electrochemistry : a practical introduction , 1981 .

[5] Ernest Otto Doebelin,et al. Measurement Systems Application and Design , 1966 .

[6] John S. Steinhart,et al. Calibration curves for thermistors , 1968 .