Biomimetic Materials by Freeze Casting
暂无分享,去创建一个
[1] M. Meyers,et al. Biomimetic Materials by Freeze Casting , 2013, JOM.
[2] Srinivasan Arjun Tekalur,et al. Synthetic staggered architecture composites , 2013 .
[3] U. Wegst,et al. Platelets self-assemble into porous nacre during freeze casting. , 2013, Journal of the mechanical behavior of biomedical materials.
[4] M. Meyers,et al. Structural Biological Materials: Critical Mechanics-Materials Connections , 2013, Science.
[5] H. C. Park,et al. Porous mullite ceramics derived from coal fly ash using a freeze-gel casting/polymer sponge technique , 2013, Journal of Porous Materials.
[6] Srinivasan Arjun Tekalur,et al. High strain rate mechanical behavior of seashell-mimetic composites: Analytical model formulation and validation , 2012 .
[7] Marc A. Meyers,et al. Biological materials: Functional adaptations and bioinspired designs , 2012 .
[8] Q. Cai,et al. Osteoconductive effectiveness of bone graft derived from antler cancellous bone: an experimental study in the rabbit mandible defect model. , 2012, International journal of oral and maxillofacial surgery.
[9] Kajal K Mallick,et al. Three-dimensional porous bioscaffolds for bone tissue regeneration: fabrication via adaptive foam reticulation and freeze casting techniques, characterization, and cell study. , 2012, Journal of biomedical materials research. Part A.
[10] M. Meyers,et al. Magnetic freeze casting inspired by nature , 2012 .
[11] C. Guizard,et al. Ice-structuring mechanism for zirconium acetate. , 2012, Langmuir : the ACS journal of surfaces and colloids.
[12] E. Olevsky,et al. Microchannelled hydroxyapatite components by sequential freeze drying and free pressureless spark plasma sintering , 2012 .
[13] M. Boyce,et al. Periodic bicontinuous composites for high specific energy absorption. , 2012, Nano letters.
[14] Tianyi Yang,et al. Bio‐Inspired Nacre‐like Composite Films Based on Graphene with Superior Mechanical, Electrical, and Biocompatible Properties , 2012, Advanced materials.
[15] Michel B. Johnson,et al. Thermal conductivity of tunable lamellar aluminum oxide/polymethyl methacrylate hybrid composites , 2012 .
[16] E. Maire,et al. Particle redistribution and structural defect development during ice templating , 2012, 1804.08699.
[17] André R Studart,et al. Composites Reinforced in Three Dimensions by Using Low Magnetic Fields , 2012, Science.
[18] Wenle Li,et al. Freeze casting of porous materials: review of critical factors in microstructure evolution , 2012 .
[19] R. Ritchie. The conflicts between strength and toughness. , 2011, Nature materials.
[20] J. McKittrick,et al. Compressive mechanical properties of demineralized and deproteinized cancellous bone. , 2011, Journal of the mechanical behavior of biomedical materials.
[21] Seog-Young Yoon,et al. TBA-based freeze/gel casting of porous hydroxyapatite scaffolds , 2011 .
[22] Joanna McKittrick,et al. Anisotropy in the compressive mechanical properties of bovine cortical bone and the mineral and protein constituents. , 2011, Acta biomaterialia.
[23] H. Mirzadeh,et al. Hydroxyapatite scaffolds infiltrated with thermally crosslinked polycaprolactone fumarate and polycaprolactone itaconate. , 2011, Journal of biomedical materials research. Part A.
[24] Rui Guo,et al. Piezoelectric Properties of the 1–3 Type Porous Lead Zirconate Titanate Ceramics , 2011 .
[25] G. Bernard-Granger,et al. Influence of surface tension, osmotic pressure and pores morphology on the densification of ice-templated ceramics , 2011 .
[26] Eduardo Saiz,et al. Bioinspired Strong and Highly Porous Glass Scaffolds , 2011, Advanced functional materials.
[27] Adil Akkouch,et al. A novel collagen/hydroxyapatite/poly(lactide-co-ε-caprolactone) biodegradable and bioactive 3D porous scaffold for bone regeneration. , 2011, Journal of biomedical materials research. Part A.
[28] Yue Zhang,et al. Effect of Suspension State on the Pore Structure of Freeze‐Cast Ceramics , 2011 .
[29] L. Qian,et al. Controlled freezing and freeze drying: a versatile route for porous and micro‐/nano‐structured materials , 2011 .
[30] J. Chevalier,et al. Mechanical properties and cytocompatibility of poly(ε-caprolactone)-infiltrated biphasic calcium phosphate scaffolds with bimodal pore distribution. , 2010, Acta biomaterialia.
[31] Fernando Guiberteau,et al. Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration. , 2010, Acta biomaterialia.
[32] E. Maire,et al. Influence of Particle Size on Ice Nucleation and Growth During the Ice‐Templating Process , 2010, 1805.01354.
[33] F. Moztarzadeh,et al. Preparation, characterization and mechanical properties of controlled porous gelatin/hydroxyapatite nanocomposite through layer solvent casting combined with freeze-drying and lamination techniques , 2010 .
[34] Won Young Kim,et al. Macroporous silicate ceramics prepared by freeze casting combined with polymer sponge method , 2010 .
[35] Eduardo Saiz,et al. A novel biomimetic approach to the design of high-performance ceramic–metal composites , 2010, Journal of The Royal Society Interface.
[36] T. Yang,et al. Hydroxyapatite scaffolds processed using a TBA-based freeze-gel casting/polymer sponge technique , 2010, Journal of materials science. Materials in medicine.
[37] M. Meyers,et al. Interfacial shear strength in abalone nacre. , 2009, Journal of the mechanical behavior of biomedical materials.
[38] E. Maire,et al. Metastable and unstable cellular solidification of colloidal suspensions. , 2009, Nature materials.
[39] K. Rezwan,et al. Hydroxyapatite/SiO2 Composites via Freeze Casting for Bone Tissue Engineering , 2009 .
[40] E. Maire,et al. In situ X-ray radiography and tomography observations of the solidification of aqueous alumina particle suspensions. Part I: Initial instants , 2009, 1710.04929.
[41] Yumin Zhang,et al. Fabrication of Ceramics with Complex Porous Structures by the Impregnate–Freeze‐Casting Process , 2009 .
[42] Yumin Zhang,et al. Preparation of a Dense/Porous BiLayered Ceramic by Applying an Electric Field During Freeze Casting , 2009 .
[43] Hyun-Do Jung,et al. Fabrication of titanium scaffolds with porosity and pore size gradients by sequential freeze casting , 2009 .
[44] Hyoun‐Ee Kim,et al. Compressive strength and processing of camphene-based freeze cast calcium phosphate scaffolds with aligned pores , 2009 .
[45] E. Saiz,et al. Architectural Control of Freeze‐Cast Ceramics Through Additives and Templating , 2009, 1710.04095.
[46] Eduardo Saiz,et al. Designing highly toughened hybrid composites through nature-inspired hierarchical complexity , 2009 .
[47] I G Turner,et al. Fabrication of HA/TCP scaffolds with a graded and porous structure using a camphene-based freeze-casting method. , 2009, Acta biomaterialia.
[48] B. Bal,et al. Proliferation and function of MC3T3-E1 cells on freeze-cast hydroxyapatite scaffolds with oriented pore architectures , 2009, Journal of materials science. Materials in medicine.
[49] R. Ritchie,et al. Tough, Bio-Inspired Hybrid Materials , 2008, Science.
[50] I. Nettleship,et al. Effect of Polyethylene Glycol on the Microstructure of Freeze‐Cast Alumina , 2008 .
[51] H. Zou,et al. Polymer/silica nanocomposites: preparation, characterization, properties, and applications. , 2008, Chemical reviews.
[52] Fatih Dogan,et al. Freeze casting of porous hydroxyapatite scaffolds. II. Sintering, microstructure, and mechanical behavior. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.
[53] F. Doğan,et al. Freeze casting of porous hydroxyapatite scaffolds. I. Processing and general microstructure. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.
[54] E. Saiz,et al. Porous ceramic scaffolds with complex architectures , 2008 .
[55] S. Deville. Freeze‐Casting of Porous Ceramics: A Review of Current Achievements and Issues , 2008, 1710.04201.
[56] Ludwig J. Gauckler,et al. Bioinspired Design and Assembly of Platelet Reinforced Polymer Films , 2008, Science.
[57] M. Gutiérrez,et al. Ice-Templated Materials: Sophisticated Structures Exhibiting Enhanced Functionalities Obtained after Unidirectional Freezing and Ice-Segregation-Induced Self-Assembly† , 2008 .
[58] A. Waas,et al. Ultrastrong and Stiff Layered Polymer Nanocomposites , 2007, Science.
[59] Peter Fratzl,et al. Biomimetic materials research: what can we really learn from nature's structural materials? , 2007, Journal of The Royal Society Interface.
[60] Hyoun‐Ee Kim,et al. Generation of Large Pore Channels for Bone Tissue Engineering Using Camphene-Based Freeze Casting , 2007 .
[61] Hyoun‐Ee Kim,et al. Highly porous hydroxyapatite bioceramics with interconnected pore channels using camphene-based freeze casting , 2007 .
[62] Eduardo Saiz,et al. Ice-templated porous alumina structures , 2007, 1710.04651.
[63] J. Ferreira,et al. Nano‐TiO2‐Coated Unidirectional Porous Glass Structure Prepared by Freeze Drying and Solution Infiltration , 2007 .
[64] Hyoun‐Ee Kim,et al. Effect of Polystyrene Addition on Freeze Casting of Ceramic/Camphene Slurry for Ultra‐High Porosity Ceramics with Aligned Pore Channels , 2006 .
[65] Eduardo Saiz,et al. Freeze casting of hydroxyapatite scaffolds for bone tissue engineering. , 2006, Biomaterials.
[66] U. Steiner,et al. Bioinspired Polymer–Inorganic Hybrid Materials , 2006 .
[67] R. Ritchie,et al. Fabrication and mechanical properties of PLA/HA composites: A study of in vitro degradation. , 2006, Materials science & engineering. C, Biomimetic and supramolecular systems.
[68] H. Bahn,et al. Fabrication of a Porous Bioactive Glass–Ceramic Using Room-Temperature Freeze Casting , 2006 .
[69] J. Halloran,et al. Particle Redistribution During Dendritic Solidification of Particle Suspensions , 2006 .
[70] T. Moritz,et al. Ceramic Bodies with Complex Geometries and Ceramic Shells by Freeze Casting Using Ice as Mold Material , 2006 .
[71] J. Lahann,et al. Multipotent Polymer Coatings Based on Chemical Vapor Deposition Copolymerization , 2006 .
[72] Hyoun‐Ee Kim,et al. In situ Fabrication of a Dense/Porous Bi‐layered Ceramic Composite using Freeze Casting of a Ceramic–Camphene Slurry , 2006 .
[73] Eduardo Saiz,et al. Freezing as a Path to Build Complex Composites , 2006, Science.
[74] J. Lahann,et al. Surface modification of confined microgeometries via vapor-deposited polymer coatings. , 2006, Journal of the American Chemical Society.
[75] W. Lim,et al. Preparation and characterization of interpenetrating phased TCP/HA/PLGA composites , 2005 .
[76] Andrew I. Cooper,et al. Aligned two- and three-dimensional structures by directional freezing of polymers and nanoparticles , 2005, Nature materials.
[77] H. Seitz,et al. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.
[78] J. Halloran,et al. Porous Ceramic Bodies with Interconnected Pore Channels by a Novel Freeze Casting Technique , 2005 .
[79] J. Halloran,et al. Room-Temperature Freeze Casting for Ceramics with Nonaqueous Sublimable Vehicles in the Naphthalene–Camphor Eutectic System , 2005 .
[80] Marc A. Meyers,et al. Growth and structure in abalone shell , 2005 .
[81] J. Jang,et al. Facile fabrication of inorganic-polymer core-shell nanostructures by a one-step vapor deposition polymerization. , 2003, Angewandte Chemie.
[82] Zhiyong Tang,et al. Nanostructured artificial nacre , 2003, Nature materials.
[83] M. Awano,et al. Preparation of NiO–YSZ tubular support with radially aligned pore channels , 2003 .
[84] G. Pezzotti,et al. In situ polymerization into porous ceramics: a novel route to tough biomimetic materials , 2002, Journal of materials science. Materials in medicine.
[85] J. Lu,et al. Role of interconnections in porous bioceramics on bone recolonization in vitro and in vivo , 1999, Journal of materials science. Materials in medicine.
[86] Steve Weiner,et al. THE MATERIAL BONE: Structure-Mechanical Function Relations , 1998 .
[87] C. Brinker,et al. Continuous self-assembly of organic–inorganic nanocomposite coatings that mimic nacre , 1998, Nature.
[88] S F Hulbert,et al. Potential of ceramic materials as permanently implantable skeletal prostheses. , 1970, Journal of biomedical materials research.
[89] M. Meyers,et al. Porous Hydroxyapatite-Polyhydroxybutyrate Composites Fabricated by a Novel Method Via Centrifugation , 2013 .
[90] K. Zhou,et al. Effects of rheological properties on ice-templated porous hydroxyapatite ceramics. , 2013, Materials science & engineering. C, Materials for biological applications.
[91] Marc A. Meyers,et al. Potential Bone Replacement Materials Prepared by Two Methods , 2012 .
[92] D. Dunand,et al. Mechanical properties of directionally freeze-cast titanium foams , 2011 .
[93] Y. Zhang,et al. Pore-forming agent induced microstructure evolution of freeze casted hydroxyapatite , 2011 .
[94] I. Nettleship,et al. The Effect of Polyvinyl Alcohol on the Microstructure and Permeability of Freeze-Cast Alumina , 2010 .
[95] K. Mallick. Freeze Casting of Porous Bioactive Glass and Bioceramics , 2009 .
[96] R. Oberacker,et al. Control of Lamellae Spacing During Freeze Casting of Ceramics Using Double‐Side Cooling as a Novel Processing Route , 2009 .
[97] Marc André Meyers,et al. Mechanical strength of abalone nacre: role of the soft organic layer. , 2008, Journal of the mechanical behavior of biomedical materials.
[98] M. Meyers,et al. The growth of nacre in the abalone shell. , 2008, Acta biomaterialia.
[99] T. Moritz,et al. Ice-mould freeze casting of porous ceramic components , 2007 .