Advancements in X-ray astronomy demand thin, light, and closely packed thin optics which lend themselves to segmentation of the annular mirrors and, in turn, a modular approach to the mirror design. The functionality requirements of such a mirror module are well understood. A baseline modular concept for the proposed International X-Ray Observatory (IXO) Flight Mirror Assembly (FMA) consisting of 14,000 glass mirror segments divided into 60 modules was developed and extensively analyzed. Through this development, our understanding of module loads, mirror stress, thermal performance, and gravity distortion have greatly progressed. The latest progress in each of these areas is discussed herein. Gravity distortion during horizontal X-ray testing and on-orbit thermal performance have proved especially difficult design challenges. In light of these challenges, fundamental trades in modular X-ray mirror design have been performed. Future directions in module X-ray mirror design are explored including the development of a 1.8 m diameter FMA utilizing smaller mirror modules. The effect of module size on mirror stress, module selfweight distortion, thermal control, and range of segment sizes required is explored with advantages demonstrated from smaller module size in most cases.
[1]
Robert Petre,et al.
Thin Shell, Segmented X-Ray Mirrors
,
2010
.
[2]
R. Petre,et al.
Mirror technology development for the International X-ray Observatory mission
,
2009,
Optical Engineering + Applications.
[3]
Timo T. Saha.
Image defects from surface and alignment errors in grazing incidence telescopes
,
1990
.
[4]
Timo Saha,et al.
Size optimization for mirror segments for X-ray optics
,
2011,
Optical Engineering + Applications.
[5]
Philippe Gondoin,et al.
X-ray multi-mirror (XMM) telescope
,
1994,
Optics & Photonics.
[6]
Kimberly Weaver.
The Constellation-X Observatory
,
2003
.
[7]
Michael K. Choi.
Thermal Optimization of IXO SXT FMA to Meet 20?C and Stringent Temperature Gradient Requirements and Heater Power Budget
,
2010
.
[8]
Ryan S. McClelland,et al.
Design and analysis of the International X-Ray Observatory mirror modules
,
2010,
2010 IEEE Aerospace Conference.
[9]
Timo T. Saha,et al.
Design and analysis of the International X-Ray Observatory mirror modules
,
2010,
Astronomical Telescopes + Instrumentation.
[10]
Yvan Stockman,et al.
XMM flight model mirror module testing
,
1999,
Optics & Photonics.