Two-stage L-band EDFA with gain-clamped characteristics using partial gain-clamping
暂无分享,去创建一个
[1] S. Yamashita,et al. L-band erbium-doped fiber amplifier incorporating an inline fiber grating laser , 2001 .
[2] Tsair-Chun Liang,et al. Optimum configuration and design of 1480-nm pumped L-band gain-flattened EDFA using conventional erbium-doped fiber , 2000 .
[3] R. Minasian,et al. Gain clamped erbium-doped fiber amplifiers-modeling and experiment , 1997 .
[4] Byoungho Lee,et al. Dynamic performance of the all-optical gain controlled EDFA cascade in multiwavelength optical networks , 1997 .
[5] Tsair-Chun Liang,et al. Optimal design of optically gain-clamped L-band erbium-doped fiber amplifier , 2001 .
[6] Y. Sun,et al. Performance degradation of all-optical gain-clamped EDFAs due to relaxation-oscillations and spectral-hole burning in amplified WDM networks , 1997, IEEE Photonics Technology Letters.
[8] C. R. Giles,et al. Modeling erbium-doped fiber amplifiers , 1991 .
[9] John Lehrer Zyskind,et al. 80 nm ultra-wideband erbium-doped silica fibre amplifier , 1997 .
[10] K. Inoue. Gain-clamped fiber amplifier with a short length of preamplification fiber , 1999, IEEE Photonics Technology Letters.
[11] M. Zirngibl. Gain control in erbium-doped fibre amplifiers by an all-optical feedback loop , 1991 .
[12] A. Srivastava,et al. EDFA transient response to channel loss in WDM transmission system , 1997, IEEE Photonics Technology Letters.