论文信息 - Investigation of novel design piezoelectric bending actuators

Investigation of novel design piezoelectric bending actuators

Two piezoelectric bending actuators of a novel design are presented and analysed in the paper. Numerical modelling and experimental study of the piezoelectric bending actuators were performed to verify operating principle and to investigate dynamic characteristics of the actuators. Numerical calculations are performed by using finite element method. Results of experimental study of piezoelectric actuators are compared with the results of finite element simulations. Results of the numerical and experimental research are analysed and discussed.

[1] L. Eric Cross,et al. Theoretical analysis of the sensor effect of cantilever piezoelectric benders , 1999 .

[2] Ju Hyun Yoo,et al. Piezoelectric ceramic bimorph coupled to thin metal plate as cooling fan for electronic devices , 2000 .

[3] H. Tzou. Piezoelectric Shells: Distributed Sensing and Control of Continua , 1993 .

[4] P Muralt,et al. Wide-range, low-operating-voltage, bimorph STM: Application as potentiometer , 1986, IBM J. Res. Dev..

[5] Reinder Banning,et al. Modeling piezoelectric actuators , 2000 .

[6] Keisuke Yamada,et al. A new method for accurately determining the modal equivalent stiffness ratio of bonded piezoelectric structures , 2012 .

[7] Charles R. Farrar,et al. Sensor Self-diagnosis Using a Modified Impedance Model for Active Sensing-based Structural Health Monitoring , 2009 .

[8] Philippe Lutz,et al. Quasistatic displacement self-sensing method for cantilevered piezoelectric actuators. , 2009, The Review of scientific instruments.

[9] Peter Hagedorn,et al. Non-linear shear vibrations of piezoceramic actuators , 2005 .

[10] Dibin Zhu,et al. A Bimorph Multi-layer Piezoelectric Vibration Energy Harvester , 2010 .

[11] Ronald S. Fearing,et al. Development of PZT and PZN-PT based unimorph actuators for micromechanical flapping mechanisms , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).