Study of plasma characteristics of hollow cathode in glow discharge

In order to further investigate the conditions and the coupling mechanisms for generating the hollow cathode effect (HCE) for the process optimization in the field of surface modification, the plasma distribution and density in single glow and double glow hollow cathode discharge (HCD) were explored by experiments and simulations based on the two-dimensional fluid model. Additionally, we investigated the effects of the key parameters on the plasma density, the electron temperature and the potential field during the HCD. The experimental and simulation results showed that the high plasma density is owing to the HCE in the hollow cathode. It is found that there is a critical pore diameter for generating HCE, which is approximately the sum of the thickness of the plasma sheath and four times the electron-neutral mean free path in the single glow discharge while twice thickness of the plasma sheath and four times the electron-neutral mean free path in the double glow discharge. The HCE in the double glow discharge can be observed when the ignition voltage that the source cathode voltage be 250 V greater than the workpiece cathode voltage can be met while the PD value is about 1.5 ∼ 3.8 Torr ⋅ mm. Consequently, we believe that our investigation on the plasma characteristics of hollow cathode in glow discharge will contribute to the development of the more optimal processing parameters for the application of the glow plasma discharge phenomena.

[1]  J. Yi,et al.  A study for pre-processing of Nb diffusion in Nb–N layer by double-glow plasma alloying , 2020 .

[2]  G. Livadiotis.  On the generalized formulation of Debye shielding in plasmas , 2019, Physics of Plasmas.

[3]  A. Christlieb,et al.  Pressure effect on a tandem hollow cathode discharge in argon , 2017 .

[4]  Wei-Ping Li,et al.  Experimental and Theoretical Optimization of Radio Frequency Hollow Cathode Discharge , 2017, Plasma Chemistry and Plasma Processing.

[5]  C. Yuan,et al.  Investigation of Low-Pressure Glow Discharge in a Coaxial Gridded Hollow Cathode , 2016, IEEE Transactions on Plasma Science.

[6]  J. Ouyang,et al.  Numerical simulation of the sustaining discharge in radio frequency hollow cathode discharge in argon , 2014 .

[7]  Y. Ohtsu,et al.  Criteria of radio-frequency ring-shaped hollow cathode discharge using H2 and Ar gases for plasma processing , 2013 .

[8]  M. Hori,et al.  The 2012 Plasma Roadmap , 2012 .

[9]  Zhi Li,et al.  Numerical model of an Ar/NH3 atmospheric pressure direct current discharge in parallel plate geometry , 2012 .

[10]  Takashi Kimura,et al.  Experiments and global model of inductively coupled rf Ar/N2 discharges , 2010 .

[11]  J. Michler,et al.  The concept of plasma cleaning in glow discharge spectrometry , 2009 .

[12]  Yao-wen Wang,et al.  Low temperature brazing of chip inductors by abnormal glow discharge plasma , 2006, IEEE Transactions on Components and Packaging Technologies.

[13]  L. Pitchford,et al.  Solving the Boltzmann equation to obtain electron transport coefficients and rate coefficients for fluid models , 2005 .

[14]  U. Kogelschatz.  Dielectric-Barrier Discharges: Their History, Discharge Physics, and Industrial Applications , 2003 .

[15]  R. P. Keatch,et al.  Book reviewPrinciples of plasma discharges and material processing: M.A. Lieberman and A.J. Lichtenberg, John Wiley, New York, 1994, 572 pp , 1996 .

[16]  Lindsay,et al.  Absolute partial and total cross sections for electron-impact ionization of argon from threshold to 1000 eV. , 1995, Physical review. A, Atomic, molecular, and optical physics.

[17]  A. Lichtenberg,et al.  Principles of Plasma Discharges and Materials Processing , 1994 .

[18]  H. Sawin,et al.  Continuum modeling of radio‐frequency glow discharges. I. Theory and results for electropositive and electronegative gases , 1992 .

[19]  Tachibana.  Excitation of the 1s5,1s4, 1s3, and 1s2 levels of argon by low-energy electrons. , 1986, Physical review. A, General physics.

[20]  D. Okrent,et al.  Hot hollow cathode and its applications in vacuum coating: A concise review , 1986 .

[21]  C. Ferrar.  Glow discharge processes; Sputtering and plasma etching , 1981, IEEE Journal of Quantum Electronics.

[22]  Donald E. Gerhart.  Comprehensive optical and collision data for radiation action. I. H2 , 1975 .

[23]  G. Yuan.  Double Glow Plasma Surface Metallurgy Technology , 2009 .

[24]  C. M. Ferreira,et al.  Populations in the metastable and the resonance levels of argon and stepwise ionization effects in a low‐pressure argon positive column , 1985 .