A 1.8–3.8-GHz Power Amplifier With 40% Efficiency at 8-dB Power Back-Off

This paper presents a novel power combining architecture, referred to as distributed efficient power amplifier (DEPA) that mitigates the inherent bandwidth limiting factors in a Doherty power amplifier (DPA), namely, impedance inversion and load modulation, by distributing the conventional auxiliary amplifier of the DPA to multiple auxiliary subamplifiers along a broadband multisection impedance transformer. The proposed technique is demonstrated through the design, implementation, and measurement of a wideband DEPA having 8-dB output power back-off and 72% fractional bandwidth. The experimental results show a Doherty-like efficiency enhancement from 1.8 to 3.8 GHz. For the output power levels of 37.4±1.1 and 45.4±1.1 dBm, corresponding to 8-dB OBO and peak output power, the efficiency levels are between 41%–51% and 42%–62%, respectively. Furthermore, linearized modulated measurements show that the DEPA is linearizable and meets the spectral requirements for modern wireless communication systems.

[1]  Vincent Fusco,et al.  Toward a More Generalized Doherty Power Amplifier Design for Broadband Operation , 2017, IEEE Transactions on Microwave Theory and Techniques.

[2]  J. Laskar,et al.  Analysis and design of a high-efficiency multistage Doherty power amplifier for wireless communications , 2005, IEEE Transactions on Microwave Theory and Techniques.

[3]  Mengsu Yang,et al.  Improved Doherty Amplifier Design with Minimum Phase Delay in Output Matching Network for Wideband Application , 2016, IEEE Microwave and Wireless Components Letters.

[4]  L. C. N. de Vreede,et al.  On the bandwidth performance of Doherty amplifiers , 2013, 2013 IEEE International Wireless Symposium (IWS).

[5]  C. Fager,et al.  A Modified Doherty Power Amplifier With Extended Bandwidth and Reconfigurable Efficiency , 2013, IEEE Transactions on Microwave Theory and Techniques.

[6]  H. Zirath,et al.  Design of Varactor-Based Tunable Matching Networks for Dynamic Load Modulation of High Power Amplifiers , 2009, IEEE Transactions on Microwave Theory and Techniques.

[7]  F. Raab,et al.  Power amplifiers and transmitters for RF and microwave , 2002 .

[8]  A. Z. Markos,et al.  Frequency Response Analysis and Bandwidth Extension of the Doherty Amplifier , 2011, IEEE Transactions on Microwave Theory and Techniques.

[9]  F. M. Ghannouchi,et al.  Mitigation of Bandwidth Limitation in Wireless Doherty Amplifiers With Substantial Bandwidth Enhancement Using Digital Techniques , 2012, IEEE Transactions on Microwave Theory and Techniques.

[10]  G. Ghione,et al.  3–3.6-GHz Wideband GaN Doherty Power Amplifier Exploiting Output Compensation Stages , 2012, IEEE Transactions on Microwave Theory and Techniques.

[11]  Franco Giannini,et al.  A Closed-Form Design Technique for Ultra-Wideband Doherty Power Amplifiers , 2014, IEEE Transactions on Microwave Theory and Techniques.

[12]  F. Raab.  Intermodulation distortion in Kahn-technique transmitters , 1996 .

[13]  Arnaldo Oliveira,et al.  A Broadband Almost-Digital RF Transmitter With an Efficient Power Amplifier , 2016, IEEE Transactions on Microwave Theory and Techniques.

[14]  Shintaro Watanabe,et al.  A Miniature Broadband Doherty Power Amplifier With a Series-Connected Load , 2015, IEEE Transactions on Microwave Theory and Techniques.

[15]  Christian Fager,et al.  A 1–3-GHz Digitally Controlled Dual-RF Input Power-Amplifier Design Based on a Doherty-Outphasing Continuum Analysis , 2013, IEEE Transactions on Microwave Theory and Techniques.

[16]  Frederick Raab,et al.  Efficiency of Doherty RF Power-Amplifier Systems , 1987, IEEE Transactions on Broadcasting.

[17]  Fadhel M. Ghannouchi,et al.  Generalized Theory and Design Methodology of Wideband Doherty Amplifiers Applied to the Realization of an Octave-Bandwidth Prototype , 2017, IEEE Transactions on Microwave Theory and Techniques.

[18]  Lawrence J Kushner.  Microwave Power Amplifier Analysis and Design , 1988 .

[19]  D. Peroulis,et al.  Design of Highly Efficient Broadband Class-E Power Amplifier Using Synthesized Low-Pass Matching Networks , 2011, IEEE Transactions on Microwave Theory and Techniques.

[20]  Marco Pirola,et al.  Design of an 87% Fractional Bandwidth Doherty Power Amplifier Supported by a Simplified Bandwidth Estimation Method , 2018, IEEE Transactions on Microwave Theory and Techniques.

[21]  Stefan Parkvall,et al.  5G wireless access: requirements and realization , 2014, IEEE Communications Magazine.

[22]  Rolf H. Jansen,et al.  Broadband Doherty Power Amplifier via Real Frequency Technique , 2012, IEEE Transactions on Microwave Theory and Techniques.

[23]  Fadhel M. Ghannouchi,et al.  A Broadband Doherty Power Amplifier Based on Continuous-Mode Technology , 2016, IEEE Transactions on Microwave Theory and Techniques.

[24]  Mincheol Seo,et al.  Broadband Doherty Power Amplifier Based on Asymmetric Load Matching Networks , 2015, IEEE Transactions on Circuits and Systems II: Express Briefs.

[25]  Kwok-Keung M. Cheng,et al.  Improving Power Utilization Factor of Broadband Doherty Amplifier by Using Bandpass Auxiliary Transformer , 2015, IEEE Transactions on Microwave Theory and Techniques.

[26]  Eduard Bertran,et al.  A Wideband Doherty-Like Architecture Using a Klopfenstein Taper for Load Modulation , 2015, IEEE Microwave and Wireless Components Letters.

[27]  R. Fano.  Theoretical limitations on the broadband matching of arbitrary impedances , 1950 .

[28]  Paul Saad,et al.  Ultra-Wideband Doherty-Like Power Amplifier , 2018, 2018 IEEE/MTT-S International Microwave Symposium - IMS.

[29]  Christian Fager,et al.  Design of a Highly Efficient 2–4-GHz Octave Bandwidth GaN-HEMT Power Amplifier , 2010, IEEE Transactions on Microwave Theory and Techniques.

[30]  Jr. R. Wyndrum.  Microwave filters, impedance-matching networks, and coupling structures , 1965 .

[31]  Tommy Svensson,et al.  The role of small cells, coordinated multipoint, and massive MIMO in 5G , 2014, IEEE Communications Magazine.

[32]  Franco Giannini,et al.  A Wideband Doherty Architecture With 36% of Fractional Bandwidth , 2013, IEEE Microwave and Wireless Components Letters.

[33]  S. Boumaiza,et al.  A Modified Doherty Configuration for Broadband Amplification Using Symmetrical Devices , 2012, IEEE Transactions on Microwave Theory and Techniques.

[34]  Weimin Shi,et al.  The Influence of the Output Impedances of Peaking Power Amplifier on Broadband Doherty Amplifiers , 2017, IEEE Transactions on Microwave Theory and Techniques.

[35]  Slim Boumaiza,et al.  Doherty Power Amplifier With Extended Bandwidth and Improved Linearizability Under Carrier-Aggregated Signal Stimuli , 2016, IEEE Microwave and Wireless Components Letters.

[36]  W.H. Doherty,et al.  A New High Efficiency Power Amplifier for Modulated Waves , 1936, Proceedings of the Institute of Radio Engineers.

[37]  H. W. Bode,et al.  Network analysis and feedback amplifier design , 1945 .

[38]  H. Chireix.  High Power Outphasing Modulation , 1935, Proceedings of the Institute of Radio Engineers.

[39]  Renato Negra,et al.  Broadband Sequential Power Amplifier With Doherty-Type Active Load Modulation , 2015, IEEE Transactions on Microwave Theory and Techniques.

[40]  Slim Boumaiza,et al.  An Extended-Bandwidth Three-Way Doherty Power Amplifier , 2013, IEEE Transactions on Microwave Theory and Techniques.

[41]  Dongsu Kim,et al.  Design of Bandwidth-Enhanced Doherty Power Amplifiers for Handset Applications , 2011, IEEE Transactions on Microwave Theory and Techniques.

[42]  L.C.N. de Vreede,et al.  A High-Efficiency 100-W GaN Three-Way Doherty Amplifier for Base-Station Applications , 2008, IEEE Transactions on Microwave Theory and Techniques.