Improvement of a Splicing Machine to Decrease Abrupt Tension Changes and Tail Defects during the Roll Exchange Process in a Roll-to-Roll Manufacturing System

[1]  Kee-Hyun Shin,et al.  Multi-response optimization of R2R gravure printing using orthogonal array and principal component analysis as a weighting factor , 2017 .

[2]  Jongsu Lee,et al.  Optimization of printing conditions for microscale multiline printing in continuous roll-to-roll gravure printing , 2016 .

[3]  Caroline Sunyong Lee,et al.  A review on fabrication processes for electrochromic devices , 2016 .

[4]  Gyoujin Cho,et al.  Fully Printed and Encapsulated SWCNT-Based Thin Film Transistors via a Combination of R2R Gravure and Inkjet Printing. , 2016, ACS applied materials & interfaces.

[5]  Jongsu Lee,et al.  Register mark measurement errors in high-precision roll-to-roll continuous systems: The effect of register mark geometry on measurement error , 2016 .

[6]  T. Mei,et al.  Optimization for solid polymer microstructure replication using gas-assisted hot embossing under low pressure , 2016 .

[7]  Kee-Hyun Shin,et al.  Roll-to-Roll Coating Technology and Its Applications: A Review , 2016 .

[8]  J. Woo,et al.  Ultraclean contact transfer of patterned Ag electrodes by thermal release tape for transparent conductive electrode , 2016 .

[9]  Sangkee Min,et al.  From design for manufacturing (DFM) to manufacturing for design (MFD) via hybrid manufacturing and smart factory: A review and perspective of paradigm shift , 2016 .

[10]  S. Cha,et al.  Performance enhancement of thin film LSCF cathodes by gold current collecting layer , 2016 .

[11]  J. Yu,et al.  Electrical behavior of laser-sintered Cu based metal-organic decomposition ink in air environment and application as current collectors in supercapacitor , 2015 .

[12]  Jongsu Lee,et al.  Analysis of dynamic thermal characteristic of register of roll-to-roll multi-layer printing systems , 2015 .

[13]  Janghoon Park,et al.  Analysis of adhesion strength of laminated copper layers in roll-to-roll lamination process , 2015 .

[14]  Aravind Seshadri,et al.  Modeling and control of a rotating turret winder used in roll-to-roll manufacturing , 2015 .

[15]  Dongjin Lee,et al.  Register control algorithm for high resolution multilayer printing in the roll-to-roll process , 2015 .

[16]  Changwoo Lee,et al.  Novel approach to predict the varying thicknesses of a PVA film during a roll-to-roll process , 2015 .

[17]  Chen Chen,et al.  Optimization of taper winding tension in roll-to-roll web systems , 2014 .

[18]  Hyunkyoo Kang,et al.  Modeling and compensation of the machine directional register in roll-to-roll printing , 2013 .

[19]  Xu Liu,et al.  Self‐calibration three‐dimensional light field display based on scalable multi‐LCDs , 2012, Journal of the Society for Information Display.

[20]  Marie-Ange Bueno,et al.  Robust control strategies for an electric motor driven accumulator with elastic webs. , 2012, ISA transactions.

[21]  Takeshi Nishida,et al.  Decentralized Control Performances of an Experimental Web Handling System , 2012 .

[22]  Hyunkyoo Kang,et al.  Advanced taper tension method for the performance improvement of a roll-to-roll printing production line with a winding process , 2012 .

[23]  Hyunkyoo Kang,et al.  Modeling and Matching Design of a Tension Controller Using Pendulum Dancer in Roll-to-Roll Systems , 2010, 2010 IEEE Industry Applications Society Annual Meeting.

[24]  Changwan Kim,et al.  A Novel Method to Guarantee the Specified Thickness and Surface Roughness of the Roll-to-Roll Printed Patterns Using the Tension of a Moving Substrate , 2010, Journal of Microelectromechanical Systems.

[25]  Hyunkyoo Kang,et al.  A study on tension behavior considering thermal effects in roll-to-roll E-printing , 2010 .

[26]  Hyunkyoo Kang,et al.  A study on the tension estimator by using register error in a printing section of roll to roll e-printing systems , 2009 .

[27]  Klaus Röbenack,et al.  Nonlinear tension observers for web machines , 2004, Autom..

[28]  Ku Chin Lin,et al.  Observer-based tension feedback control with friction and inertia compensation , 2003, IEEE Trans. Control. Syst. Technol..

[29]  J. K. Good,et al.  An Orthotropic Viscoelastic Winding Model Including a Nonlinear Radial Stiffness , 1997 .

[30]  Jongsu Lee,et al.  An advanced model for the numerical analysis of the radial stress in center-wound rolls , 2016 .

[31]  Hong Lu,et al.  Research on Taper Tension Control Theory Apply in Material Rolling Up Procedure , 2012 .

[32]  Michael Aaron Randolph.  Commercial assessment of roll to roll manufacturing of electronic displays , 2006 .

[33]  John C. Lambropoulos,et al.  Strain-based formulas for stresses in profiled center-wound rolls , 1999 .