Emission Area Patterning of Organic Light‐Emitting Diodes (OLEDs) via Printed Dielectrics

Solution-processibility is one of the distinguished traits of organic lightemitting diodes (OLEDs) compared to existing solid-state LED technologies. It allows new opportunities which can simplify the fabrication and potentially reduce the cost of manufacturing process. Emission area patterning is one of the crucial fabrication steps and it usually involves subtractive methods, such as photolithography or etching. Here, printing techniques are used to pattern the emission area of blade-coated OLED layers. The print qualities of a number of printing schemes are characterized and compared. Spray coating and screen printing are used to deposit dielectrics with desired patterns on the OLED layers. At luminance of 1000 cd m−2 the OLEDs patterned using spray-coated and screen-printed dielectric show current density of 8.2 and 10.1 mA cm−2, external quantum efficiency (EQE) of 2.1% and 2.1%, and luminous efficacy of 5.5 and 6.3 lm W−1, respectively. The OLED characteristics and features of each printing scheme in depositing the dielectric layer are discussed. The printing methods are further applied to demonstrate displays with complex shapes and a seven-segment display.

[1]  J. Sturm,et al.  Super‐high‐resolution transfer printing for full‐color OLED display patterning , 2010 .

[2]  Zhibin Yu,et al.  User-interactive electronic skin for instantaneous pressure visualization. , 2013, Nature materials.

[3]  Se-Jin Choi,et al.  Whole device printing for full colour displays with organic light emitting diodes , 2006 .

[4]  Minyang Yang,et al.  All-solution blade–slit coated polymer light-emitting diodes , 2012 .

[5]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[6]  Takao Someya,et al.  Ultrathin, highly flexible and stretchable PLEDs , 2013, Nature Photonics.

[7]  D. Bradley,et al.  Polymer Transfer Printing: Application to Layer Coating, Pattern Definition, and Diode Dark Current Blocking , 2008 .

[8]  M. Kaltenbrunner,et al.  Ultraflexible organic photonic skin , 2016, Science Advances.

[9]  Richard H. Friend,et al.  Efficient Conjugated‐Polymer Optoelectronic Devices Fabricated by Thin‐Film Transfer‐Printing Technique , 2008 .

[10]  Chihaya Adachi,et al.  100% phosphorescence quantum efficiency of Ir(III) complexes in organic semiconductor films , 2005 .

[11]  Donal D. C. Bradley,et al.  Planar heterojunction organic photovoltaic diodes via a novel stamp transfer process , 2008 .

[12]  Leandro Lorenzelli,et al.  Flexible Tactile Sensors Using Screen-Printed P(VDF-TrFE) and MWCNT/PDMS Composites , 2015, IEEE Sensors Journal.

[13]  R. Storer,et al.  Critical variables of solder paste stencil printing for micro-BGA and fine-pitch QFP , 2004, IEEE Transactions on Electronics Packaging Manufacturing.

[14]  Leandro Lorenzelli,et al.  Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review , 2015, IEEE Sensors Journal.

[15]  Donggeon Han,et al.  Flexible Blade‐Coated Multicolor Polymer Light‐Emitting Diodes for Optoelectronic Sensors , 2017, Advanced materials.

[16]  Yang Yang,et al.  Polymer electroluminescent devices processed by inkjet printing: I. Polymer light-emitting logo , 1998 .

[17]  R. Ghaffari,et al.  Recent Advances in Flexible and Stretchable Bio‐Electronic Devices Integrated with Nanomaterials , 2016, Advanced materials.

[18]  Bernard Geffroy,et al.  Organic light‐emitting diode (OLED) technology: materials, devices and display technologies , 2006 .

[19]  S. Forrest,et al.  Highly efficient phosphorescent emission from organic electroluminescent devices , 1998, Nature.

[20]  Kanad Ghose,et al.  Flexible Hybrid Electronics: Direct Interfacing of Soft and Hard Electronics for Wearable Health Monitoring , 2016 .

[21]  K. Leo,et al.  Quantification of energy loss mechanisms in organic light-emitting diodes , 2010 .

[22]  Jong-Hyun Ahn,et al.  Extremely efficient flexible organic light-emitting diodes with modified graphene anode , 2012, Nature Photonics.

[23]  Frederik C. Krebs,et al.  Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating , 2012, Nature Communications.

[24]  A. A. Shestopalov,et al.  Urethane–acrylate polymers in high-resolution contact printing , 2016 .

[25]  Adrien Pierre,et al.  Charge-integrating organic heterojunction phototransistors for wide-dynamic-range image sensors , 2017, Nature Photonics.

[26]  Yanchun Han,et al.  Inkjet printed polystyrene sulfuric acid-doped poly(3,4-ethylenedioxythiophene) (PEDOT) uniform thickness films in confined grooves through decreasing the surface tension of PEDOT inks , 2017 .

[27]  K. Gilleo.  Rheology and Surface Chemistry , 2005 .

[28]  C. Tang,et al.  Organic Electroluminescent Diodes , 1987 .

[29]  Christian Mayr,et al.  Organic Light‐Emitting Diodes with 30% External Quantum Efficiency Based on a Horizontally Oriented Emitter , 2013 .

[30]  Claire M. Lochner,et al.  Monitoring of Vital Signs with Flexible and Wearable Medical Devices , 2016, Advanced materials.

[31]  P. Yoo,et al.  Simple Detachment Patterning of Organic Layers and Its Application to Organic Light‐Emitting Diodes , 2005 .