What is the Young's Modulus of Silicon?

The Young's modulus (E) of a material is a key parameter for mechanical engineering design. Silicon, the most common single material used in microelectromechanical systems (MEMS), is an anisotropic crystalline material whose material properties depend on orientation relative to the crystal lattice. This fact means that the correct value of E for analyzing two different designs in silicon may differ by up to 45%. However, perhaps, because of the perceived complexity of the subject, many researchers oversimplify silicon elastic behavior and use inaccurate values for design and analysis. This paper presents the best known elasticity data for silicon, both in depth and in a summary form, so that it may be readily accessible to MEMS designers.

[1]  H. J. Mcskimin,et al.  Measurement of the Elastic Constants of Silicon Single Crystals and Their Thermal Coefficients , 1951 .

[2]  H. J. Mcskimin.  Measurement of Elastic Constants at Low Temperatures by Means of Ultrasonic Waves–Data for Silicon and Germanium Single Crystals, and for Fused Silica , 1953 .

[3]  W. P. Mason.  Physical Acoustics and the Properties of Solids , 1956 .

[4]  J. Nye.  Physical Properties of Crystals: Their Representation by Tensors and Matrices , 1957 .

[5]  S. Timoshenko,et al.  THEORY OF PLATES AND SHELLS , 1959 .

[6]  Robert W. Keyes,et al.  The Electronic Contribution to the Elastic Properties of Germanium , 1961, IBM J. Res. Dev..

[7]  H. J. Mcskimin,et al.  Elastic Moduli of Silicon vs Hydrostatic Pressure at 25.0°C and − 195.8°C , 1964 .

[8]  W. P. Mason,et al.  Ultrasonic Wave Propagation in Dopedn-Germanium andp-Silicon , 1964 .

[9]  J. Wortman,et al.  Young's Modulus, Shear Modulus, and Poisson's Ratio in Silicon and Germanium , 1965 .

[10]  John J. Hall,et al.  Electronic Effects in the Elastic Constants of n -Type Silicon , 1967 .

[11]  B. Auld,et al.  Acoustic fields and waves in solids , 1973 .

[12]  Y. P. Varshni.  Temperature Dependence of the Elastic Constants , 1970 .

[13]  Representation of Elastic Behavior in Cubic Materials for Arbitrary Axes , 1970 .

[14]  G Sines,et al.  The anisotropy of Young's modulus, shear modulus and Poisson's ratio in cubic materials , 1971 .

[15]  W. Brantley.  Calculated elastic constants for stress problems associated with semiconductor devices , 1973 .

[16]  D. J. Gorman.  Free vibration analysis of beams and shafts , 1975 .

[17]  G. K. White,et al.  Linear thermal expansion measurements on silicon from 6 to 340 K , 1977 .

[18]  C. Kim.  Electronic effect on the elastic constant c44 of n‐type silicon , 1981 .

[19]  K.E. Petersen,et al.  Silicon as a mechanical material , 1982, Proceedings of the IEEE.

[20]  L. Walpole.  The elastic shear moduli of a cubic crystal , 1986 .

[21]  M. Humbert,et al.  Practical aspects of calculating the elastic properties of polycrystals from the texture according to different models , 1992 .

[22]  K. Y. Kim,et al.  ANALYTICAL AND OPTIMIZATION PROCEDURES FOR DETERMINATION OF ALL ELASTIC CONSTANTS OF ANISOTROPIC SOLIDS FROM GROUP VELOCITY DATA MEASURED IN SYMMETRY PLANES , 1995 .

[23]  R. Howe,et al.  Young's Modulus Of In Situ Phosphorus-doped Polysilicon , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[24]  R. L. Edwards,et al.  A new technique for measuring the mechanical properties of thin films , 1997 .

[25]  N. D. de Rooij,et al.  Design of resonators for the determination of the temperature coefficients of elastic constants of monocrystalline silicon , 1997, Proceedings of International Frequency Control Symposium.

[26]  Measurement by Laser Generated Ultrasound of the Stiffness Tensor of an Anisotropic Material at Elevated Temperatures , 1999 .

[27]  S. Senturia.  Microsystem Design , 2000 .

[28]  Nadim Maluf,et al.  An Introduction to Microelectromechanical Systems Engineering , 2000 .

[29]  Claude A. Klein,et al.  How accurate are Stoney’s equation and recent modifications , 2000 .

[30]  Y. Isono,et al.  Evaluation of size effect on mechanical properties of single crystal silicon by nanoscale bending test using AFM , 2000, Journal of Microelectromechanical Systems.

[31]  Naoki Ono,et al.  Measurement of Young's Modulus of Silicon Single Crystal at High Temperature and Its Dependency on Boron Concentration Using the Flexural Vibration Method , 2000 .

[32]  Matthew A. Hopcroft,et al.  MAT-Test: A New Method for Thin-Film Materials Characterization Submitted to the Board of Graduate Studies for the Degree of Master of Philosophy by Research (MPhil) in the Cambridge University Engineering Department , 2002 .

[33]  T. Ono,et al.  Study on ultra-thin NEMS cantilevers - high yield fabrication and size-effect on Young's modulus of silicon , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[34]  J. Kiihamaki,et al.  Square-extensional mode single-crystal silicon micromechanical resonator for low-phase-noise oscillator applications , 2004, IEEE Electron Device Letters.

[35]  Chang Liu,et al.  Foundations of MEMS , 2006 .

[36]  Thomas W. Kenny,et al.  Using the temperature dependence of resonator quality factor as a thermometer , 2007 .

[37]  M. Agarwal,et al.  Temperature Dependence of Quality Factor in MEMS Resonators , 2006, Journal of Microelectromechanical Systems.

[38]  Z. Stanimirović,et al.  Mechanical Properties of MEMS Materials , 2009 .

[39]  Patrick J. French,et al.  Characterizing size-dependent effective elastic modulus of silicon nanocantilevers using electrostatic pull-in instability , 2009 .