Analysis of “on” and “off” times for thermally driven VO2 metal-insulator transition nanoscale switching devices

Abstract Vanadium oxide undergoes a sharp metal-insulator transition in the vicinity of room temperature and there is considerable interest in exploring novel device applications that utilize this phase transition. Using experimentally determined values of the thermal conductivity across the metal-insulator transition in VO2 thin films, we estimate the switching characteristics of two-terminal VO2 devices. The minimum switching time for both heating (“on” state) and cooling (“off” state) processes is explored using a simple resistance-capacitance thermal circuit model. The estimated minimum switching time is on the order of ∼1 ns for 20 nm VO2 films which is comparable to experimentally observed switching times. Optimal operating temperatures to maximize switching times are estimated. Methods to further enhance the switching kinetics by device thickness, carrier doping/strain, interfacial thermal resistance and input thermal energy are discussed. The simulations are compared with a 3-D model for VO2 devices on Si substrates utilizing COMSOL. The results are of potential relevance to the emerging field of correlated oxide electronics with fast phase transitions.

[1]  S. Fourmaux,et al.  Optical switching in VO2 films by below-gap excitation , 2008 .

[2]  L. Feldman,et al.  Confocal Raman microscopy across the metal-insulator transition of single vanadium dioxide nanoparticles. , 2009, Nano letters.

[3]  Gokul Gopalakrishnan,et al.  On the triggering mechanism for the metal–insulator transition in thin film VO2 devices: electric field versus thermal effects , 2009, Journal of Materials Science.

[4]  Nevill Mott,et al.  Metal-Insulator Transition , 1968 .

[5]  Shriram Ramanathan,et al.  Thermal conductivity and dynamic heat capacity across the metal-insulator transition in thin film VO2 , 2010 .

[6]  Ivan K. Schuller,et al.  First-order reversal curve measurements of the metal-insulator transition in VO 2 : Signatures of persistent metallic domains , 2009 .

[7]  Sahand Hormoz,et al.  Limits on vanadium oxide Mott metal–insulator transition field-effect transistors , 2010 .

[8]  D. Cahill,et al.  Thermal conductance of interfaces between highly dissimilar materials , 2006 .

[9]  Byung-Gyu Chae,et al.  Abrupt metal–insulator transition observed in VO2 thin films induced by a switching voltage pulse , 2005 .

[10]  Shriram Ramanathan,et al.  Observation of electric field-assisted phase transition in thin film vanadium oxide in a metal-oxide-semiconductor device geometry , 2008 .

[11]  J. Sakai,et al.  Effect of pressure on the electric-field-induced resistance switching of VO2 planar-type junctions , 2008 .

[12]  M. Asheghi,et al.  Thermal Boundary Resistance Measurements for Phase-Change Memory Devices , 2010, IEEE Electron Device Letters.

[13]  Alexander Pergament,et al.  Electrical switching and Mott transition in VO2 , 2000 .

[14]  A. Majumdar,et al.  Nanoscale thermal transport , 2003, Journal of Applied Physics.

[15]  Massimiliano Di Ventra,et al.  Phase-transition driven memristive system , 2009, 0901.0899.

[16]  Young-soo Park,et al.  Two Series Oxide Resistors Applicable to High Speed and High Density Nonvolatile Memory , 2007 .

[17]  James A. Hutchby,et al.  Limits to binary logic switch scaling - a gedanken model , 2003, Proc. IEEE.