Performance optimization of long-wave infrared detectors based on InAs/GaSb strained layer superlattices

Relationship between V/III beam equivalent pressure (BEP) flux ratios during the molecular beam epitaxial (MBE) growth of long-wave infrared InAs/GaSb strained layer superlattice (SLS) material, crystalline quality of asgrown material, and devices' signal (responsivity) and noise (dark current) characteristics was investigated. It was found that the V/III ratio is a critical factor affecting the dark current, cut off wavelength and the responsivity of the device. Modest change of As/In BEP flux ratio (from 5.5 to 7) resulted in red-shift of cut-off wavelength by 0.6 μm. Temperature-dependent dark current measurements revealed more than two orders of magnitude difference in dark current densities of detectors grown with different As/In BEP flux ratios. The highest responsivity and QE values, equal to 0.75 A/W and 10% (74K, 9 μm, -0.4V), were demonstrated by the device with highest dark current density and notoptimal structural properties. The observed dependences of devices' signal (responsivity) and noise (dark current) characteristics in conjunction with the structural properties and the growth conditions of SLS material suggest that the good structural properties of grown detector material as well as low noise would not necessary result in improved device performance.

[1]  G. M. Williams.  Comment on ‘‘Temperature limits on infrared detectivities of InAs/InxGa1−xSb superlattices and bulk HgxCd1−xTe’’ [J. Appl. Phys. 74, 4774 (1993)] , 1995 .

[2]  Meimei Z. Tidrow,et al.  The effect of doping the M-barrier in very long-wave type-II InAs /GaSb heterodiodes , 2008 .

[3]  H. S. Kim,et al.  Type II InAs∕GaSb strain layer superlattice detectors with p-on-n polarity , 2007 .

[4]  Yajun Wei,et al.  Type-II InAs/GaSb superlattices and detectors with λc >18μm , 2002, SPIE OPTO.

[5]  Philippe Christol,et al.  Characterization of midwave infrared InAs/GaSb superlattice photodiode , 2009 .

[6]  Arezou Khoshakhlagh,et al.  Optimization of InAs/GaSb type-II superlattice interfaces for long-wave (̃8 μm) infrared detection , 2009 .

[7]  Manijeh Razeghi,et al.  High differential resistance type-II InAs∕GaSb superlattice photodiodes for the long-wavelength infrared , 2006 .

[8]  S. Krishna,et al.  Structural and Optical Characterization of InAs/GaSb nanoscale superlattices for mid-infrared detection , 2006, 2006 Sixth IEEE Conference on Nanotechnology.

[9]  Yajun Wei,et al.  Type II InAs/GaSb superlattice photovoltaic detectors with cutoff wavelength approaching 32 μm , 2002 .

[10]  K. Malloy,et al.  Background carrier concentration in midwave and longwave InAs/GaSb type II superlattices on GaAs substrate , 2010 .

[11]  Gregory C. Dente,et al.  Pseudopotential methods for superlattices: Applications to mid-infrared semiconductor lasers , 1999 .

[12]  Christoph H. Grein,et al.  Molecular beam epitaxy growth of high quantum efficiency InAs/GaSb superlattice detectors , 2005 .

[13]  Philippe Christol,et al.  A type-II superlattice period with a modified InAs to GaSb thickness ratio for midwavelength infrared photodiode performance improvement , 2010 .

[14]  D. Ting,et al.  A high-performance long wavelength superlattice complementary barrier infrared detector , 2009 .

[15]  Yajun Wei,et al.  Very high quantum efficiency in type-II InAs/GaSb superlattice photodiode with cutoff of 12 μm , 2007 .

[16]  Elena Plis,et al.  Performance improvement of longwave infrared photodetector based on type-II InAs/GaSb superlattices using unipolar current blocking layers , 2010 .

[17]  S. Chuang,et al.  Midinfrared type-II InAs∕GaSb superlattice photodiodes toward room temperature operation , 2008 .

[18]  Manijeh Razeghi,et al.  Dark current suppression in type II InAs∕GaSb superlattice long wavelength infrared photodiodes with M-structure barrier , 2007 .

[19]  Darryl L. Smith,et al.  Proposal for strained type II superlattice infrared detectors , 1987 .

[20]  Manijeh Razeghi,et al.  On the performance and surface passivation of type II InAs∕GaSb superlattice photodiodes for the very-long-wavelength infrared , 2005 .

[21]  Jeffrey H. Warner,et al.  Graded band gap for dark-current suppression in long-wave infrared W-structured type-II superlattice photodiodes , 2006 .

[22]  A. Rogalski.  New material systems for third generation infrared photodetectors , 2008 .

[23]  Elena Plis,et al.  Reduction of surface leakage current in InAs/GaSb strained layer long wavelength superlattice detectors using SU-8 passivation , 2010 .

[24]  Stephen W. Kennerly,et al.  Thin active region, type II superlattice photodiode arrays : Single-pixel and focal plane array characterization , 2007 .

[25]  Jerry R. Meyer,et al.  AUGER LIFETIME ENHANCEMENT IN INAS-GA1-XINXSB SUPERLATTICES , 1994 .